Injection Moulding Machine

ENGEL ES 16050-800 DUO

Condition: used, Payload: 0/16 Kg Arm reach: 1.50 mmNumber of Axis: 6 Repeatability: 0.03 mm Robot weight: 0 Kg Mounting: Floor Crsdpfx Asihgpveb Tjk

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA Codpfxjxcgtge Ab Tsrk - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 44,000 kg, rotor length: 2,800 mm, power: 315 kW (428.28 HP), rotational speed (max.): 87 rpm, - MERAK 2800-2 with 315 kW - Cutting system 116PR - PG190 screen (can be changed on customer request) Crjdpfxougf Dwe Ab Tok - Feed chute - Dust suppression - Electrical central lubrication - Hydraulic safety guard - Overband magnetic separator Neodymium - HP - Rubberized bolted floor plates on tracked chassis

Condition: like new (used), 1500 m² storage platform Schäfer R3000 3-story Crsdpfx Ashzw Hisb Tjk used, top condition, as new, see pictures Ground floor storage platform steel construction, above 2 floor shelf system Schäfer Manufacturer SCHÄFER R3000 CAD planning and assembly 3-storey Partial sale possible Negotiation price: on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: excellent (used), Year of construction: 2006, Krauss Maffei KM 800 – 12000 MX injection molding machine Year of production - 2006 Closing system: - Mold closing force: kN 8000 - Mold opening force: kN 560 - Dimensions of the mounting plate (h x v): mm 1600 x 1530 - Clearance between columns (h x v): mm 1120 x 1000 - Mold opening path: mm 1600 - Mold installation height (min - max): mm 500-1100 - Plate opening stroke: mm 2100 - Ejector stroke: mm 300 - Ejector force: kN 200/100 Injection system: - Screw diameter: mm 135 Cjdstmq Akepfx Ab Tjrk - Injection pressure: bar 1389 - Injection volume: cm3 8588 - Injection weight for PS: g 6098 - Number of screw revolutions, standard/option: rpm 121/153 - Injection efficiency (standard) Electric-hydraulic equipment - Nominal power of the pump motor: kW 110 - Installed power of heaters: kW 57 - Number of cylinder heating zones: - 7 - Number of dry cycles according to Euromap: 1/h 965 - Oil tank capacity: l 1500 Dimensions and weight - Net weight with control cabinet: t 45 - Machine dimensions (length x width x height): m 10.81 x 2.92 x 2.51

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Credpfsw Ucyujx Ab Tek Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: excellent (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, torque: 121 Nm, controller manufacturer: Siemens, table width: 700 mm, table length: 900 mm, table load: 1,400 kg, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 32,000 h, coolant supply: 40 bar, spindle nose: HSK63A, number of slots in tool magazine: 30, tool length: 350 mm, tool diameter: 100 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMU 80P duoBlock Year of manufacture: 2006 Operating hours: 62,000 h Spindle hours: 31,000 h Function tested and cleaned Maintenance performed according to manufacturer's specifications Geometry within new machine tolerance Equipment: 5 axes Swivel head (controlled B-axis) Direct linear measurement in X/Y/Z (glass scales) Chip conveyor Extraction system NC rotary table Tool magazine with 30 positions Heidenhain touch probe BLUM laser Handwheel Crsdpfxow Ht Ibo Ab Tek Rotating viewing window ICS 40 bar (internal coolant supply) Chip flushing Operating mode 4

Condition: like new (used), Year of construction: 2021, ENGEL DUO 17060/2000 Injection Moulding Machine Year of manufacture: 2022 Integrated ENGEL Viper 60 Robot – RC300 TECHNICAL SPECIFICATIONS: Injection unit: Screw diameter: 135 mm Screw stroke: 610 mm Injection volume: 8,731 cm³ Crodpfsw Aw Taex Ab Tjk Shot weight (PS): 7,860 g Screw rotation speed: 125 rpm Screw torque: 14,000 Nm Max. screw torque (at reduced speed): 15,630 Nm Plasticizing rate (3-zone screw): 222.9 g/s Plasticizing rate (barrier screw): 279.2 g/s Injection rate: 1,904 cm³/s Regenerative injection pressure: 1,648 bar Maximum pressure: 2,000 bar Nozzle stroke: 1,100 mm Nozzle contact force: 210 kN Barrel L/D ratio: 25 Number of heating zones (incl. nozzle): 8 Heating power: 88.5 kW Clamping unit: Clamping force: 20,000 kN Minimum clamping force: 2,000 kN Opening force with cushion: 1,600 kN Opening stroke: 3,000 mm Max. distance between platens: 3,800 mm Mould height: 800 – 1,800 mm Tie bar spacing (HxV): 2,000 x 1,600 mm Mould platen size (HxV): 2,700 x 2,430 mm Max. mould weight (moving/fixed): 2 x 41,330 kg Max. total mould weight: 62,000 kg Dry cycle stroke (Euromap 6): 1,400 mm Dry cycle time (Euromap 6): 5.5 s Ejector unit: Ejector stroke: 400 mm Ejector force: 385 kN Drive and cooling: Installed main drive power: 265 kW Oil tank capacity: 1,600 l Max. oil cooling capacity (at 25°C): 43.2 kW Cooling water consumption (at 25°C): 6.3 m³/h ENGEL Viper 60 Robot – RC300 (2022): Z-axis stroke: 4,280 mm X-axis stroke: 1,800 mm Y-axis stroke: 2,600 mm Robot fully integrated with the machine – operated via the machine control panel Machine is in excellent technical condition – latest generation ENGEL DUO with very low operating hours. Suitable for demanding large-scale production (e.g. automotive, household appliances, technical sectors). Machine is still powered, test possible. AVAILABLE IMMEDIATELY If interested, please contact us – we can provide more photos, operation video, technical documentation, and arrange a convenient date for a visit.

Condition: good (used), Year of construction: 2011, Krauss Maffei KM 850-12000 MX injection molding machine With Krauss Maffei robot Year of manufacture - 2011 Hydraulic-mechanical double-plate clamping system with 4 pressure pads and 4 locking units on the moving plate. PV - adjustment of the injection unit. MC 5 control system with color monitor, integrated control panel and USB data storage. Plasticizing system Complete plasticizing system for thermoplastics with a screw diameter of 135 mm, with reverse lock and open nozzle. Nozzle radius 25 mm, nozzle opening 9 mm TECHNICAL DATA Closing unit - mold closing force: kN 8500 - mold opening force: kN 560 - clamping plate dimensions (h x v): mm 1600 x 1600 - clearance between columns (h x v): mm 1140 x 1140 - mold opening path: mm 1600 Credpfxstrya Ro Ab Tek - mold height (min-max.): mm 500 - 1100 - opening width: mm 2100 - ejector stroke: mm 300 - ejector force: kN 200/ 100 Injection unit - screw diameter: mm 135 - injection pressure: bar 1389 - injection volume: cm3 8588 - injection size for PS: g 6098 - injection capacity: cm3/s 1414 Electro-hydraulic equipment - rated power of pump motor: kW 132 - dry cycle time according to Euromap 6: 1/h 965 - oil tank capacity: l 2440 Weight and dimensions - net weight with control cabinet: t 49 - dimensions of foundation space (L x W x H): m 11.72 x 2.92 x 2.71

Condition: reconditioned (used), Year of construction: 2002, CNC vertical machining center MIKRON VCP 800 W With path control Heidenhain iTNC 530 Year of construction: 2002 Travels: X 800 Y 650 Z 500 Speed range: 0 - 20,000 rpm infinitely variable With the following accessories: Cedpfxjviq U Ej Ab Tsrk Rigid angular table 900 mm x 600 mm clamping surface Vertical tool changer with 30 magazine slots (HSK 63) Fully protected cabin with sliding doors and interior lighting Electronic handwheel Tool measurement in the work area ( BLUM laser ) 3 D measuring probe infrared Renishaw Chip conveyor Coolant device 4 pcs. Height-adjustable machine shoes Operating instructions