CNC lathe

MORI SEIKI NLX 2500Y/700

Condition: excellent (used), Year of construction: 2013, operating hours: 4,300 h, functionality: fully functional, machine/vehicle number: NL 254131163, CNC controller M730BM with MAPS IV Capacity X-axis travel mm: 250 Y-axis travel mm: +/- 50 Z-axis travel: mm 795 Hjdpfot Akirex Ak Dsl Turning length mm: 705 Max. turning diameter mm: ø 366 Swing over bad mm: ø 920 Swing over cross-side mm: 742 Bar work capacity mm: 80 Upper turret Number of tool slots St: 12 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5,5 / 3,7 (3 mm / cont) Main spindle Speed spindle rpm: 4,000 Drive power spindle kW: 18.5 / 15 (50% ed / cont) Chuck type: BB210 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Tailstock Tailstocktravel mm: 734 Holder: MT5 equipment Chip conveyor Tool measuring arm Foot switch for chuck or collet system Interface for bar feeder

Condition: excellent (used), Year of construction: 2018, operating hours: 2,000 h, functionality: fully functional, turning height: 3,000 mm, workpiece weight (max.): 30,000 kg, turning diameter: 3,500 mm, power: 100 kW (135.96 HP), TECHNICAL CHARACTERISTICS 1. Max. machining diameter mm 3.500 2. Min. machining diameter mm 0 3. Max. height of the part mm 3.000 4. Max. load on the table to 30 5. Table diameter mm 3.000 6. Table speed range rpm 2 ÷ 130 7. Main AC motor - turning kW 100 8. The maximum torque of the faceplate in turning mode Nm 105.000 9. Ram vertical stroke (Z axe) mm 1.750 10. Turning ram cross section mm x mm 300x300 11. Horizontal stroke –X axe mm 2.000 12. Feed range (X and Z axe) mm/min 1 ÷ 6000 13. Rapid traverse (X and Z axe) mm/min 8.000 14. Feed motor torque (X and Z axe) Nm 22 18. Vertical stroke of the cross rail mm 2.700 CNC Equipment 1. Equipment type Fanuc Hodpfxotpnlws Ak Dsl Overall Dimensions 1. Floor space m 8.5 x 6 2. Max. height of the machine m 8.2 3. Max. height over floor level m 7.4 3. Machine weight to 89 Tool Magazine 1. Number of tool magazines - 1 2. Number of tools/magazine - 16 3. Feed motor torque with encoder Nm 12 4. Tool change time sec. 25 5. Maximum weight of the tool holder - for turning daN 100 6. Maximum length of the tool holder - for turning mm 600

Condition: good (used), Year of construction: 2017, operating hours: 8,800 h, functionality: fully functional, machine/vehicle number: NL2561708843, number of spindles: 2, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities: Travel X-axis (mm): 260 Travel Y-axis (mm): ±50 Travel Z-axis (mm): 795 Turning length max. (mm): 705 Turning diameter max. (mm): ø 366 Swing over bed (mm): ø 920 Swing over cross slide (mm): ø 740 Bar working capacity (mm): 80 Tool Magazine: Tool stations: 20 Tool holder: BMT40 Max. speed driven tools (rpm): 10,000 Driven tool power (kW): 5.5 / 4.9 / 4.2 (3 min / 5 min / continuous) Rapid traverse (m/min): 30 Main Spindle: Max. spindle speed (rpm): 4,000 Hodsyzxcgopfx Ak Dsl Spindle drive power (kW): 18.5 / 18.5 / 15 (25% duty cycle / 50% duty cycle / continuous) Max. torque (Nm): 49 Sub-Spindle: Max. spindle speed (rpm): 5,000 Spindle drive power (kW): 11 / 7.5 (25% duty cycle / continuous) Max. torque (Nm): 22 Sub-spindle travel (mm): 734 Cooling System: Tank capacity (liters): 366 Equipment: Chip conveyor Signal tower Machine operating hours: Power on hours: 19,393 Cutting time: 8,800 Rated power requirement (kVA): 48 Basic machine: Dimensions / Weight Length (mm): 5,330 Width (mm): 4,100 Height (mm): 2,395 Weight (kg): 8,360 The depicted tools, driven tools, and both chucks are not included in the scope of delivery.

Condition: good (used), Year of construction: 2004, Machine is good working condition. Control unit Heidenhain TNC 530 Hsdpfx Akoyufn Ie Dsl Parts shown by hand not come.

Year of construction: 2001, condition: refurbished (used), low price laser cutting machine NTX48 1,5kW refurbished, MAZAK lasercutting machine with 1500W table size: 2500mm x 1250mm machine dimension 2,6m x 6m parts conveyor full covered machine table FE: 12mm VA: 6mm plastics possible to cut incl. software incl. exhauster Hodpfxohturco Ak Dsl to test under power ! option: warranty, setup, training

Condition: refurbished (used), Measuring Range X/Y/Z = 900 x 1200 x 850mm Accuracy 4,0 + 4,5L/1000 (origin setup, now better after Retrofit) Completely refurbished 2018 with new Pantec Eagle Pro Controller Hsdpfx Akedpak Ro Djl Probesystem is Renishaw PH10MQ and SP25M Software Inspect3D Inca Premium actual version Computer is a HP z240 Option : Laserscanner (e.g. Kreon) Probe changer

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, CNC Turning- and Milling Center (Multi-functional-Machine) | Brand: MAZAK Type: INTEGREX e-650H II | Year of construction: 07/2009, Commissioning: November 2009 The machine can be inspected under power by appointment. Condition: Fully functional / operational. Operating hours (as at 10 March 2026): - Total: 91.430 h - Automatic operation: 52.054 hours - Automatic machining: 38.974 hours - Pure machining: 31.316 hours TECHNICAL SPECIFICATIONS: Workspace: - Max. Swing diameter: 920 mm - Max. Swing diameter over tool slide: 920 mm - Max. Turning diameter: 1.100 mm Main spindle: - Max. speed: 1.600 rpm - Min. speed: 35 rpm - Spindle bore: 260 mm (1.000 rpm) - Spindle nose: A2-11" - Spindle bearing inner diameter: 220 mm - Rated power (30 min. operation / 100% continuous operation): 45.0 / 37.0 kW - Max. torque: 4.500 Nm Tailstock (programmable): - Chuck: MK 6 Milling spindle: - Turret type: Single-spindle with ATC - Tool shank: Steep cone 50 Hsdpeyuq Dzefx Ak Del - Max. tool diameter: 260 mm - Max. tool length: 500 mm - B-axis indexing increments: 0,0001° - B-axis positioning for turning - Min./max. milling spindle speed: 35 - 10.000 rpm - Milling spindle motor, AC: 37 kW Travel ranges: - X-axis: 1.025 mm - Y-axis: 650 mm - Z-axis: 6.423 mm - B-axis swivel range: 240° Dimensions: - Spindle centre height: 1.350 mm - Length: 13.267 mm - Width: 3.938 mm - Height: 3.920 mm - Weight: 41 tons Additional information: - Rated power (100% continuous operation): 99,5 kVA Automatic tool changer: - Number of tools: 120-position, SK50 DIN 69871 SPECIFICATIONS / SPECIAL ACCESSORIES: - Numerical control: MAZATROL MATRIX - Documentation - CE marking - Further excellent optional extras ... Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Condition: good (used), Year of construction: 2007, Parts shown by hand not come. Hedpfx Akerpn Dvj Dsl Technical details shown on picture.

Condition: excellent (used), Year of construction: 2014, DOOSAN PUMA 2600LMB (2014) CNC LATHE WITH LIVE TOOLS AND “C” AXIS Z-1,350 CNC FANUC i Series 10.4” Color LCD EZ-Guide - Swing over bed: 780 mm - Swing over carriage: 630 mm - Max. turning diameter: 376 mm - Max. turning length: 1,245 mm - Travel: X 260 mm Z 1,350 mm - Chuck diameter: 380 mm - Bar capacity: 102 mm - Spindle nose: ASA-A2-11 - Headstock: 2,800 rpm, 22 kW - Driven turret: 12 stations BMT 65P* (Indexing 1 station 0.25 sec) - Live tools: 5.5 kW, 5,000 rpm - C axis indexing: 0.001 mm - Tailstock quill diameter/travel: 100 mm/100 mm EQUIPMENT INCLUDED: - Samchully HCH-15” 3-jaw hydraulic chuck, 380 mm diameter - C-axis 360° (0.001°) - Automatic tool presetter - Integrated tailstock - High-pressure pump - Chip conveyor - Preparation, base, and logic for steady rest - SMW AUTOBLOK SLU-3.1 hydraulic steady rest (20-165 mm) - Set of tool holders - Set of DOOSAN and FANUC manuals CONDITION: Machine in good condition. Can be seen in operation. Immediate delivery. Hsdjyb Sryjpfx Ak Dsl

Condition: new, Year of construction: 2024, functionality: fully functional, Incorrect investment by a corporation. Machine is new and unused (already delivered). The machine is available immediately with no lead time. An extremely rare opportunity. Machine type: Horizontal machining center with pallet changer Model series: NHX 8000 Control: Siemens S840Dsl with CELOS Measuring system: fully closed loop scale feedback (X/Y/Z) Machine concept: DCG Travel paths X/Y/Z: 1,400 / 1,200 / 1,350 mm Rapid traverse X/Y/Z: 50,000 mm/min Pallet system: Turn-type pallet changer Number of pallets: 2 Pallet size: 800 × 800 mm Pallet load: 2,200 kg [optional 3,000 kg] Max. workpiece Ø/H: 1,450 mm / 1,450 mm Pallet change time: 16 s B-axis: direct drive Minimum index: 0.001° Maximum speed: 100 rpm Spindle: powerMASTER Speed: 16,000 rpm Power: 85/50 kW (10% duty cycle / continuous) Torque: 549/279 Nm Taper: HSK-A100 Hsdpsxizdajfx Ak Del Cooling: central spindle cooling Internal coolant: optional CTS 7 MPa Tool magazine: chain-type, 60 positions [optional 100/120] Rack magazine options: 180 / 240 / 330 positions Max. tool diameter with adjacent tools: 110 mm Max. tool diameter without adjacent tools: 320 mm [for >10,000 rpm: 230 mm] Max. tool length: 800 mm Max. tool weight: 30 kg Tool-to-tool: 1.9 s Cut-to-cut: 5.0 s Equipment / Options: - Workpiece probe - Tool measurement - Laser control (optional) - High-pressure coolant 7 MPa (optional) - Chip conveyor - Fully enclosed enclosure with roof Dimensions n.a. Weight n.a. Connection data n.a.