Vertical Turning Machine

EMAG VTC 250

Condition: used, Year of construction: 2005, turning diameter 140 mm swing diameter 250 mm turning height 380 mm Control SIN840 spindle turning speed - stepless 1 - 6.000 U/min Fpedpfx Aev I En Rjlxeh power capacity at 40 % load 38,00 kW Spindle head DIN55026 - Size 6 spindle diameter in front bearing 110 mm travel -x axis 300 mm feed X-axis 1 - 30.000 mm/min rapid traverse X-axis 30,00 m/min feed force X axis 9.000 N travel -z axis 700 mm feed Z-Axis 1 - 40.000 mm/min rapid traverse Z-axis 40,00 m/min feed force Z axis 10.000 N no. of tools in turret 1 11 no. of tools in turret 2 11 tool taper VDI 40 total power requirement 70,00 kW weight of the machine ca. 22,00 t dimensions of the machine ca. 5,80 x 8,60 x H3,80 m Vertical turning machine with Siemens SINUMERIK 840D control, chip conveyor, dust exhauster, infeed and outfeed, turning gripper.

Condition: good (used), Year of construction: 2017, In this offer you buy used office furniture, which is in good condition. They were delivered in 2017 and are generally in very good condition, since little used. Items for sale: We also offer workplace sets for 450€. 1x desk - Manufacturer: FM - 160 x 80 x 76 (stepless height adjustable 68cm to 76cm) - gray top - aluminum frame 1x office chair "Dauphin MagicShape elan - armrests - completely adjustable - cover polo grey/black 1x mobile pedestal - Manufacturer: FM - 43,4 x 80 x 59 - one material drawer - 3 steel drawers with softclose - lockable incl. key Desks: - Approx. 10x desk from the manufacturer FM 1600 x 800 x 680 to 760 (infinitely height adjustable) in the color light gray. Frame made of aluminum - Approx. 12x folding table (can be used as a desk) 1600 x 800 x 720 on castors, in the color light gray. Aluminium frame - Approx. 2x round meeting table 1000mm diameter in the color light gray. Aluminium frame - Approx. 4x high table 1600 x 800 x 1300 in the color arctic white. Frame in white aluminum Chairs: - Approx. 10x Dauphin swivel chair MagicShapeS elan with armrests and fully adjustable. Fabric cover Polo black, base plastic black - Approx. 44x Interstuhl Hero 550H cantilever chair with armrests. Upholstery in ruby red color. Metal frame chrome-plated. - Approx. 52x Interstuhl Hero 550H cantilever chair with armrests. Upholstery in the color ocean blue. Metal frame chrome-plated. - Approx. 10x Interstuhl Kinecticis5 710K bar stool with footrest. Upholstery in the color black. Frame in silver color. - Approx. 16x Interstuhl Kinecticis5 710K bar stool with footrest. Upholstery in the color ocean blue. Frame in silver color - 12x Interstuhl Kinecticis5 710K bar stool with footrest. Upholstery in the color red. Frame in the color silver - 16x Interstuhl Kinecticis5 710K bar stool with footrest. Upholstery in the color ruby red. Frame in the color silver Storage space: - Approx. 16x FM 434 x 800 x 590 mobile pedestal with one material drawer and 3 steel drawers. Body completely in the color light gray. Handles made of aluminum meeting table with 4 conference chairs - 750,-€ net high table with 6 bar stools - 1500,-€ net Prices may vary slightly depending on the quantity purchased. We will be happy to prepare a suitable offer for you. You can also purchase each piece of furniture separately. Condition: This offer is used furniture, which may show signs of use (minor scratches or yellowing). Packing and shipping: You are welcome to look at everything during our business hours. Please make an appointment for this! Seaworthy packing and worldwide shipping is possible on request! For more information you can of course also contact us personally. Fpodpfx Ajiiv Ikjlxoh

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 300 mm, travel distance Z-axis: 740 mm, spindle speed (max.): 5,000 rpm, total height: 3,900 mm, overall weight: 14,000 kg, product length (max.): 3,100 mm, number of axes: 2, General Data Machine weight 14000 kg Measurements height 3900 mm Movement X-Axis Movement 300 mm Z-Axis Movement 740 mm Fodsx Imr Aopfx Alxeph Main Drive Number of axis 2 Spindle Speed 5000 RPM Dimensions Machine Length 3100 mm This EMAG VTC 250 Twin was manufactured in 2015. A robust vertical turning machine featuring a MINERALIT base, it handles workpieces up to 140 mm in diameter and 630 mm in length, weighing up to 20 kg. Integrated with an EMAG pick-up system and dual turrets, each with 11 tool stations. Maximum spindle speed reaches 5000 rpm, driven by a 29 kW power unit. Contact us for more information about this machine. Application Types Turning

Year of construction: 2016, condition: defective spare-parts repository (used), Offered is a VTC 250 shaft turning machine, which has four axes. Two turrets with eleven tool places each are installed in the machine. The machines were decommissioned several years ago and subsequently put into storage. Fsdpfxek Rumqj Alxoph As you can see in the pictures, the VTC will be sold in untested condition as spare parts carrier. The control system of the VTC 250 is no longer present in the machine. Other accessories such as chip conveyors, coolant systems or workpiece transport systems are not part of the advertisement. TECHNICAL DATA workpiece diameter: max. 100 mm workpiece height: max. 630 mm TOOL CARRIER 2x EMAG turret, each equipped with 11x VDI 40 without driven tools + 1x gripper Price and delivery time of the machine after arrangement.

Condition: new, Year of construction: 2024, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID GBS 218 Eco AutoCut double mitre bandsaw Speed: 25-80 m/min - Mitre left 60° - For cutting steel, stainless steel and aluminum profiles - Quick-clamping vice with quick-clamping device a. - Built-in blade tension control b. - Saw blade guide made of carbide c. - Electric automatic cooling system - Machine base (supplied disassembled) The AutoCut system consists of: - Hydraulic cylinder, feed control, spring assembly, limit switch and enables three work sequences: 1. automatic lowering of the saw frame via hydraulic cylinder with infinitely adjustable feed control valve and limit switch at the end of the cut 2. high-speed lowering of the saw frame from the rest position up to the workpiece, then switching to normal saw feed 3. manual operation - hydraulic cylinder works as a brake cylinder Fpedjt I R Edspfx Alxsh Saw blade dimensions: 2455x27x0.9mm Further accessories such as saw bands, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Condition: used, Year of construction: 2003, Feed diameter 250 mm Workpiece diameter max. 140 mm Workpiece length max. 700 mm Main spindle power (40% duty cycle) 38 kW Main spindle speed max. 4,000 rpm Rapid traverse speed X / Z 30 / 40 m/min Tool carrier 3 x disc turret with up to 11 driven tools each, or end machining turret Fpodpoydfpkjfx Alxeh

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Z-axis: 700 mm, turning diameter: 140 mm, turning height: 380 mm, turning diameter over bed slide: 250 mm, TECHNICAL DETAILS Turning diameter: 140 mm Swing diameter: 250 mm Turning height: 380 mm Travel paths Travel - X axis: 300 mm Travel - Z axis: 700 mm Spindle Spindle speeds: 1 - 6,000 rpm Drive power 40% duty cycle: 38.00 kW Spindle nose: DIN 55026 - size 6 Fedpfxewyvg Te Alxeph Spindle bore diameter at front bearing: 110 mm Feed & Rapid Traverse X-axis feed rate: 1 - 30,000 mm/min X-axis rapid traverse: 30.00 m/min X-axis feed force: 9,000 N Z-axis feed rate: 1 - 40,000 mm/min Z-axis rapid traverse: 40.00 m/min Z-axis feed force: 10,000 N Tools Number of tools in turret 1: 11 Number of tools in turret 2: 11 Toolholder: VDI 40 MACHINE DETAILS Control: SINUMERIK 840D Total power requirement: 70.00 kW Machine weight: approx. 22.00 t Space requirements: approx. 5.80 x 8.60 x H3.80 m EQUIPMENT Chip conveyor Extraction unit Infeed and outfeed Reversing gripper

Condition: new, Year of construction: 2021, functionality: fully functional, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine Table: Table size: 950 x 550 mm Load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 Distance between T-slots: 150 mm Travel axes: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 – 700 mm Linear guides & speeds: Ball linear guides in X/Y axes Roller linear guide in Z axis Fpedpfx Ajifn N Nslxeh Rapid traverse X/Y/Z: 40/40/30 m/min Feedrate during milling: 0 – 10,000 mm/min Smallest increment: 0.001 mm Tool magazine (CAM-Type) / changer: Number of magazine pockets: 30 System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with adjacent pockets free: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300 liter tank and pumps External coolant around spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operator panel Electronic handwheel (wired) Central lubrication oil/air Full enclosure Work light Heat exchanger at control cabinet Auto power-off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE declaration of conformity according to European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation area: W3,160 x D3,000 x H3,000 mm (incl. chip conveyor ejection to the left) Machine weight: approx. 5,400 kg (net) Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Drum-type tool magazine with 30 pockets, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC controls), incl. wiring and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - Through-spindle coolant pump, 20 bar pressure, for direct-driven spindles - Includes cartridge filter - Belt-type chip conveyor including chip cart (chip discharge at front, to the left side of the machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage monitoring in the machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year of construction 2025 – NEW) - Full enclosure - Double gripper Available immediately

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Z-axis: 700 mm, turning diameter: 140 mm, turning height: 380 mm, turning diameter over bed slide: 250 mm, TECHNICAL DETAILS Turning diameter: 140 mm Swing diameter: 250 mm Turning height: 380 mm Travel paths Fsdpjxf A Npsfx Alxoph Travel - X axis: 300 mm Travel - Z axis: 700 mm Spindle Spindle speeds: 1 - 6,000 rpm Drive power 40% duty cycle: 38.00 kW Spindle nose: DIN 55026 - size 6 Spindle bore diameter at front bearing: 110 mm Feed & Rapid Traverse X-axis feed rate: 1 - 30,000 mm/min X-axis rapid traverse: 30.00 m/min X-axis feed force: 9,000 N Z-axis feed rate: 1 - 40,000 mm/min Z-axis rapid traverse: 40.00 m/min Z-axis feed force: 10,000 N Tools Number of tools in turret 1: 11 Number of tools in turret 2: 11 Toolholder: VDI 40 MACHINE DETAILS Control: SINUMERIK 840D Total power requirement: 70.00 kW Machine weight: approx. 22.00 t Space requirements: approx. 5.80 x 8.60 x H3.80 m EQUIPMENT Chip conveyor Extraction unit Infeed and outfeed Reversing gripper

Condition: ready for operation (used), Year of construction: 2010, For sale is a turning line for drive shafts incl. end machining machine (cutting to length & drilling) Fpedpfx Aloupgbwexeh The line consists of the following machines: Lang -Laru > cutting to length and drilling 3x Emag VTC 250 for turning the drive shafts All machines are connected with an Ewab belt Each lathe is loaded with a KUKA robot The technical data of the machines can be seen in the pictures.

Condition: used, System: used piston diaphragm pump / pump Type: HMD-G-50-500 Flow rate: 40.0 m3/h Fsdpfx Alsdkdi Tsxjph Pressure: 1,6 MPa

Condition: used, Year of construction: 2008, turning diameter max. 140 mm swing diameter Futter / Chuck Ø 250 mm turning height 630 mm Control SIN840 PL spindle turning speed - stepless 1 - 5.000 U/min power capacity at 40 % load 38,00 kW Spindle head DIN55026 - Size 6 spindle diameter in front bearing 110 mm travel -x axis 300 mm feed X-axis 1 - 30.000 mm/min rapid traverse X-axis 30,00 m/min feed force X axis 9.000 N travel -z axis 700 mm Fjdjwhqrtjpfx Alxoph feed Z-Axis 1 - 40.000 mm/min rapid traverse Z-axis 40,00 m/min feed force Z axis 10.000 N no. of tools in turret 1 12 no. of tools in turret 2 12 tool taper VDI 40 DIN 69880 total power requirement 70 kW weight of the machine ca. 25 t dimensions of the machine ca. 6,8 x 4,7 x 4,3 m Chip conveyor Spindle cooling system HYFRA Coolant system Knoll