Vertical turning lathe

EMAG VL 5S.

Condition: used, Year of construction: 2006, CNC Vertical Turning Lathe: Siemens Sinumerik control, connection rating approximately 42 kW, rated current 63A, total weight approximately 6500 kg. Data: Chip Conveyor (Sermeto): year 2007, serial no. 6901979. Data: Iedpfxozwfz Sj Am Hjtl Coolant Filter System (W+W Filtersysteme ME-FI 600): serial no. 503458/3, year 2005.

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, input voltage: 400 V, year of last overhaul: 2023, Description – General: Year of manufacture: 2001/2023 Manufacturer: Emag Machine type: VL3 Technical data: Control system: Fanuc 21i-T Swinging diameter: approx. 210 mm Maximum speed: 6,500 rpm Turret: VDI 40 mm, 12 stations The machine does not have a live tool. Hinged belt chip conveyor Spindle mount: GR. 5 Rotating parts conveyor. Machine weight: approx. 5.5 t The following work was carried out during this overhaul in 2023: - The machine was completely disassembled, cleaned, and repainted. - The main spindle was fitted with new bearings. Itsdpfxetpu Szs Am Hel - The guides and guide shoes in the X-axis and Z-axis were replaced. - The ball screw in the X-axis and Z-axis was replaced. - New unit for central lubrication and new hoses. - The hydraulic unit was inspected and serviced. The drive coupling between the motor and pump was replaced. - The cooling unit was inspected and serviced; the temperature difference controller was replaced. - The clamping cylinder was fitted with new bearings and seals. - The gearbox of the A-axis was fitted with new bearings, and the coupling between the motor and gearbox was replaced. - The electrical cabinet was cleaned. - The control panel was replaced. - New screen. - New internal lighting. - The turret was disassembled, wear parts were inspected, cleaned, and re-sealed. - The turret encoder and encoder wheel were cleaned. - The length measuring systems in the X-axis and Z-axis were disassembled and cleaned. - The springs of the pickup station were replaced. - The motors of the X-axis and Z-axis were checked for bearing damage. - The panes on the work door were replaced. - The chip conveyor was completely disassembled, fitted with new bearings, cleaned, and painted. - Various small parts on the machine were also replaced, of course. The product has been described by us with the utmost care. The description is non-binding and should be verified during an inspection.

Condition: used, Year of construction: 2008, Vertical turning center, Siemens Sinumerik control, connected load approx. 36 kW, rated current 58 A, total weight approx. 6500 kg. Details: Filter unit (W+W ME-FI 600): serial no. 502171/1, manufactured in 2002. Itjdpezwfxqefx Am Hel Details: Chip conveyor (Sermeto): manufactured in 08/2008.

Condition: used, Year of construction: 2006, Technical details: turning diameter: 250 mm swing diameter: 260 mm Ijdpfx Amjxc Idge Hetl Available from October 10, 2025 The system consists of two individual systems that are linked together. No driven tools! *

Year of construction: 2004, condition: ready for operation (used), A total of three EMAG vertical turning machines are available. Chuck diameter: 200mm, max. swing diameter: 200mm, travel X/Z: 200mm/400mm, speed: 7500rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 2450mm/1900mm/2300mm, weight: approx. 5500kg, control: Fanuc. Including extraction system and chip conveyor. Documentation available. An on-site inspection is possible. Itsdpfjygmdbjx Am Hol

Condition: used, Year of construction: 2014, 2 Vertical Turning Machines (Tandem) Manufacturer: EMAG Model: VL 3 Year: 2014 Control: Fanuc 31/32i TECHNICAL SPECIFICATIONS FOR THE VL3 MACHINE (Subject to errors and omissions) WORKING AREA Chuck diameter: 170 mm Swing diameter: 210 mm X-travel: 400 mm Z-travel: 200 mm Loading time (depending on clamping device): 2–4 sec MAIN SPINDLE Spindle flange to DIN 55026, size 5 Spindle bearing diameter (front): 80 mm Maximum spindle speed: 7,500 rpm MAIN DRIVE AC asynchronous motor Power at 40/100% duty cycle: 25/16 kW Full power from spindle speed (100% ED): 1,800 rpm Torque at 40/100% duty cycle: 134/85 Nm FEED DRIVE Rapid traverse speed, X axis: 60 m/min Rapid traverse speed, Z axis: 30 m/min Feed force (X and Z): 5 kN Ball screw diameter (X/Z): 40 mm TURRET Itodpfxsytn Eme Am Hol Cylinder shank mount DIN 69880, 12 positions Shank diameter: 40 mm ELECTRICAL EQUIPMENT according to VDE 0113 Operating voltage: 400 V Control voltage – DC: 24 V; AC: 230 V Frequency: 50 Hz Connected load without/with live tool: 28 / 31 kW Supply line protection: 50 A DIMENSIONS & WEIGHT Length: 2,500 mm Length incl. chip conveyor: 3,600 mm Width: 1,900 mm Height: 2,300 mm Weight: approx. 5,500 kg Linear roller guides in the X-axis located outside the machining area. GANTRY SLIDE INCLUDING SLIDE GUIDE Motor spindle mounting AC synchronous drives for X and Z axes Encapsulated linear measuring systems Resolution all longitudinal axes: 0.001 mm (absolute measurement) Rapid traverse: X axis 60 m/min, Z axis 30 m/min 1 MOTOR SPINDLE size 5 DIN 55026 Max. speed: 7,500 rpm Power at 40/100% duty cycle: 25/16 kW Torque at 40/100% duty cycle: 134/85 Nm HYDRAULIC UNIT with gear pump. CENTRALIZED OIL SUPPLY for lubrication of ball screws and roller guides COOLING UNIT Controls the machine’s thermal balance. Keeps motor spindle, turret, and control cabinet at ambient temperature. TOOL CARRIER SYSTEM 1 12-STATION TURRET with mounting holes Ø40 DIN 69880 Shortest indexing time via electric motor drive Cooled for consistent accuracy Internal coolant supply to tool in cut position WORKPIECE STORAGE & TRANSPORT SYSTEM 1 CIRCULATING WORKPIECE FEEDER Storage capacity: 27 workpieces (Ø 30–85 mm), or 18 workpieces (Ø 30–130 mm), Max. workpiece height: 100 mm Loading height: 1020 mm Chain-type accumulating conveyor with transport prisms Workpieces are NC-positioned for clamping device take-over. The pick-up spindle retrieves blanks from the conversion-free storage and conveyor system. COOLANT AND CHIP REMOVAL SYSTEM 1 COOLANT SUPPLY with integrated coolant tank, capacity approx. 300 l, coolant filter Coolant pump delivery rate: approx. 80 l/min at 7 bar 1 CHIP CONVEYOR Discharge height: 1,250 mm, hinge belt design 1 EMULSION MIST EXTRACTION from the machining area ADDITIONAL EQUIPMENT AND EXPANSIONS WORKPIECE STORAGE & TRANSPORT SYSTEM 1 INTERFACE FOR EMAG TRANSFER AND FLIP UNIT OP20 COOLANT AND CHIP REMOVAL SYSTEM 1 FLUSHING NOZZLES: 2x in working area, 1x in machine base HYDRAULICS & PNEUMATICS 1 MAINTENANCE UNIT FOR COMPRESSED AIR with mounting 1 PICK-UP DEVICE BLOW-OFF (2 nozzles, WITHOUT maintenance unit – see maintenance unit compressed air)

Year of construction: 2018, condition: ready for operation (used), A CNC vertical turning machine EMAG is available. Workpiece diameter: 100mm, max. workpiece length: 150mm, max. chuck diameter: 160mm, travel X/Z: 650mm/375mm, travel Y: +/-50mm, spindle power: 15.7kW, torque: 77Nm, speed: 6000rpm, tool stations: 12, rapid traverse X/Z: 60m/30m/min. Machine dimensions X/Y/Z: approx. 2500mm/1800mm/2800mm, weight: approx. 4500kg, control: Fanuc 32-iB, operating hours: approx. 28487h, spindle hours: approx. 18640h. Including extraction system, 2 axial and 2 radial driven tools, 20x fixed tool holders, 3-jaw chuck and probe. Documentation available. An on-site inspection is possible. Ijdpfx Asxq Exkjm Hstl

Condition: used, Year of construction: 2012, swing diameter 210 mm x-travel 400 mm z-travel 200 mm control FANUC - 32i A weight of the machine ca. ~ 5.500 kg Vertical Turning Machine | EMAG - VL 3 + VL 3 The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL3 | VL-3 Ijdpezmiwvofx Am Hstl

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 745 mm, travel distance Z-axis: 300 mm, spindle motor power: 18,000 W, spindle speed (max.): 4,500 rpm, total height: 3,200 mm, workpiece diameter (max.): 220 mm, overall weight: 7,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840Dsl, workpiece height (max.): 175 mm, product length (max.): 3,120 mm, number of axes: 2, This EMAG EMAG VL5 i DSL vertical turning machine was manufactured in 2014. It features a powerful main spindle drive with 18kW and a speed range of 0-4500 rpm. Equipped with a Siemens SINUMERIK 840Dsl control system and a robust 12-position EMAG flange turret, it ensures precise and efficient operations. Ideal for handling workpieces up to 6kg with its specialized hydraulic chuck. For more information about this vertical turning machine, please reach out to us. - Max. Chuck Diameter: 250 mm- Max. Swing Diameter: 270 mm- Closed Standard Automation Capacity: 16 (80...220 mm) / 10 kg; 22 (30...160 mm) / 8 kg; 37 (30...85 mm) / 4.5 kg- Max. Permissible Total Automation Load: 175 kg- Chain Length: 224 Inches- Number of Chain Links: 224- Chain Pitch: 1 Inch (25.4 mm)- Loading Time: 2-4 s- Spindle Flange (DIN 55026): Size 6- Front Spindle Bearing Diameter: 110 mm- Main Drive AC Asynchronous Motor Power (100/40% ED): 18 / 27 kW- Main Drive Torque (100/40% ED): 200 / 300 Nm- Corner Speed: 850 rpm- Rapid Traverse Rate X: 60 m/min- Rapid Traverse Rate Z: 30 m/min- Feed Force X and Z: 10 kN- Ball Screw Diameter X / Z: 40 mm- Tool Carrier: 12-position turret, Cylindrical Shank Receptacle DIN 69880 (VDI 40)- Tool Shank Diameter: 40 mm- Max. Tool Length incl. Holder: 190 mm- Max. Tool Interference Circle: 760 mm- Driven Tools Max. Speed: 6000 rpm- Driven Tools Corner Speed: 3000 rpm- Driven Tools Max. Power: 8.5 kW- Driven Tools Max. Torque (10/40/100% ED): 40 / 24 / 15 Nm- Current Supply / Current Type: 3 ~- Frequency: 50 Hz- Operating Voltage: 400 V- Control Voltage General (DC): 24 V- Control Voltage Valve / AC: 24 V (DC) / 230 V (AC)- Light Connection: 24 V- Connection Power: 36 kW- Rated Current: 64 A- Supply Fuse: 80 A- Electrical Execution Standard: VDE 0113- Length incl. Chip Conveyor: 4185 mm Additional equipment, not included • Coolant tank capacity: 360 liters Machine Benefits Technical Machine Benefits • High working accuracy, rapid traverse speeds, high maximum speed of driven tools • Machine from single shift operation • Maximum room temperature: up to 30°c • Maximum humidity: 50% • Sound pressure level: 78db(a) Extra Information Machine still under power Itodszg H Dyspfx Am Hol Dimensions Machine Depth 3900 mm Technical Specification Through-spindle Coolant Yes Driven Tools Yes

Condition: used, Year of construction: 2012, swing diameter 210 mm x-travel 400 mm z-travel 200 mm Ijdjzmiwispfx Am Hjtl control SIEMENS - 840 D sl weight of the machine ca. ~ 5.500 kg Vertical Turning Machine | EMAG - VL 3 + VL 3 Y The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL3 | VL-3