5-axis workingcenter

Elumatec SBZ 150

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1500050209, bar length: 12,000 mm, Bar machining center was purchased in 2022 as part of a partial business acquisition. For this purchase, an appraisal was prepared by the original owner. (Appraisal attached) Fodexlq Rbopfx Afispn The machine has hardly been used over the past three years as we have two other machining centers. Bar machining center ex works (can be dismantled and collected at any time)

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1500050285, travel distance X-axis: 7,800 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, workpiece length (max.): 7,300 mm, rotational speed (min.): 24,000 rpm, spindle speed (max.): 24,000 rpm, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 14, tool diameter: 100 mm, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, SBZ 150 | 5-axis Profile Machining Centre 7.800 mm Fsdpfx Asxdnh Uofiepn 5-axis profile machining centre ● Designed for economical and efficient machining of aluminium and thin-walled steel profiles ● All operations, such as routing, drilling, tapping, thread milling, notching and sawing, are performed while the profile bar is stationary to protect the profile surfaces 6-sided machining ● Operator software with graphic display of workpieces ● The magazine can be equipped with nine standard tools, five special tools and one saw blade ● Ten clamps ● Two separate working zones enable machining in shuttle operation ● 5-axis controller for 3D machining ● 15" colour display, Diskette port ● DOS operating system

Year of construction: 2001, condition: used, Pictures to follow - machine is being overhauled Fpedpot Ea Tfsfx Afijn Technical data: - X-axis travel: 7300mm - Y-axis travel: 1000mm - Z-axis travel: 650mm - Swivel angle A-axis: 0-90° freely programmable - Swivel angle C-axis: 0-355° freely programmable - Max. Machining length without end face machining: 7300mm - Max. Machining length with end face machining: 6980mm - Tool changer with 10 places and a saw blade holder - 9 material clamps - SK30 tool holder - 2-layer machining

Condition: excellent (used), Year of construction: 2015, operating hours: 20,223 h, functionality: fully functional, machine/vehicle number: 1500050376, travel distance X-axis: 7,520 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 300 mm, controller model: eluCam, spindle speed (max.): 24,000 rpm, operating hours of spindle: 3,040 h, spindle motor power: 15,000 W, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, SBZ 150 Profile Machining Center 7.3 m 5-Axis CNC eluCam Year of manufacture: 2015 8 clamping devices Automatic length measurement on both sides Indexing unit with clamping carriage, software version Complete tool set (HSK-63F) including two saw blades D=400 mm + D=180 mm Machine is in excellent condition and immediately ready for operation Machine is ready for collection in a 40' HiCube sea container and can be inspected at any time by appointment Fpodpfxsw Rcdle Afien

Year of construction: 2005, condition: excellent (used), functionality: fully functional, elumatec SBZ150 Profile Machining Centre 6.0 m 5-axis control. Efficient machining of aluminium and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the processing unit in the X-axis; Low-wear direct drive; With automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Robust machine bed for a working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, with 3 axes for path control; High-dynamic three-phase servo drives with resolver and digital servo controller; Swivel angles of the A and C axes freely programmable; With color screen and disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connection; Barcode scanner, label printer, etc. Integrated network card 10/100 MBit, RJ 45 port (network connection by customer’s IT administrator) Analog modem (customer must provide an analog telephone line) Technical data: Travel range X-axis: max. 6,240 mm Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max. travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90° freely programmable Swivel angle C-axis: 0-355° freely programmable Further details on the milling range see drawing no. 150 05 17 08 Fpsdsw A Rv Iepfx Afion Max. processing length for face machining left + right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling spindle: Speed [rpm]: up to 100–22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: 100 mm max. Saw blade diameter: 400 mm Tool length: max. 150 mm from nominal taper. Included accessories: Automatic tool changer (without tool holders); Dual-circuit clamping system with 2 pneumatically retractable material stops; Automatic clamp detection and positioning; 8 horizontal pneumatic material clamping units; Tool presetting gauge Front light barrier Saw blade D400 with mount Angle milling head Important: The profile machining centre is fitted as standard with front light barriers. Any necessary side or rear guarding must be supplied on-site by the customer or please request an offer for safety fences from us. Incl. Angle milling head for underside machining

Year of construction: 2004, condition: ready for operation (used), Main Drive Spindle speed range 34000 Spindle motor power 15 kW Number of axis 5 Movement X-Axis Movement 9500 mm X-Axis Rapid Traverse 70 m/min Y-Axis Movement 1000 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 630 mm Z-Axis Rapid Traverse 40 m/min Tools Type of tool holder HSK-63F Media Chip conveyor Yes Fsdpfx Afjwtiw Esiepn Additional Equipment 2-zone pendulum operation Angle milling head for bottom-side machining (optional) Automatic length measurement Barcode scanner Label printer Cycle time monitoring Tool holders, collets, saw blades, tools included eluCad (office software package for production optimization) This 5-axis Elumatec SBZ 150 was manufactured in 2004. It features a CNC profile machining center with a maximum machining length of 9,220 mm and a spindle speed of 34,000 rpm. The machine includes a tool magazine with standard and special tools, and supports 6-sided machining with optional angle head. It's dismantled and ready for delivery. If you are looking to get high-quality milling capabilities consider the Elumatec SBZ 150 machine we have for sale. Contact us for more information. Application Types Other Machine Tools

Year of construction: 2000, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 1500050136, Technical data: - Travel X-axis: 7300mm - Travel Y-axis: 1000mm - Travel Z-axis: 650mm Fodev Avg Hepfx Afiopn - Swivel angle A-axis: 0-90° freely programmable - Swivel angle C-axis 0-355° freely programmable - Max. processing length without front-side processing: 7300mm - Max. processing length with front-side processing: 6980mm - Tool changer with 10 places and a saw blade holder Bo72Ttwr8E - 9 material clamps - Tool holder SK30 - 2-layer processing