Elumatec SBZ 130 bar machining centre

Elumatec SBZ 130

Condition: used, Year of construction: 1999, x-axis 6450 mm y-axis 400 mm z-axis 380 mm working lenght 6500 mm Number of tools 8 St. Godpet H Sn Refx Agbebg tool taper BT30 tool changing time 1,2 sec diameter of tools max. 80 mm turning speeds 6000 U/min Feed speed X = 34 m/min. Feed speed Y+Z = 18 m/min. total power requirement 8,5 kW dimensions 9800 x 3000 x 2400/3300 mm weight 5400 kg *Bar machining center, 3-axis machining of aluminum, plastic, steel and stainless steel profiles*

Condition: good (used), Year of construction: 1994, CNC Spiral bending machine, capacity 50cm3, min-max diam of coil 500-3.500mm. Gedpfx Ageiu Acpsbebg

Year of construction: 2006, condition: used, 3-axis machining center with automatic 8-way tool changer for aluminum, PVC or steel profiles Max. processing length: 7200 mm Max. travel Y-axis: 480 mm Gedju T Nm Njpfx Agbsbg Max. travel Z-axis: 325 mm E 500 control Speed infinitely adjustable up to 6,000 rpm minimum quantity spraying 2 angle heads High-speed spindle clamp detection and displacement 8 pneumatic material clamps Pendulum operation possible through 2 light barrier areas Loading included in the price Weight: approx. 5,000 kg

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20095 / 2004 / 05, Bidding obligates you to pick up the item on time by 05/09/2025! Loading of the machine will be carried out by the seller! The industrial PC of the machine, valued at approx. €13,000, was replaced in 2023! TECHNICAL DETAILS Processing length: 8 m EQUIPMENT Shown angle heads Toolholders Gedpfx Agjw Nql Ujbobg

Condition: reconditioned (used), Year of construction: 1989, Dear Sir or Madam, For sale is a partially overhauled Deckel FP1 milling machine equipped with a 3-axis Heidenhain TNC113 active control, notable for its ease of operation. This modern version, built in 1989, features central lubrication, an electric coolant pump, and a machine lamp, among other benefits. The machine has undergone extensive partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on-site at any time. Delivery time: on request Machine no.: 2102-xxxx Table: Rigid angled table or rotary-tilt-swivel table Travel (X/Y/Z): X 300 mm / Y 160 mm / Z 340 mm Quill travel: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool taper: SK40 Feed: Infinitely variable 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: 3-axis Heidenhain TNC113 digital readout with active control, infinitely variable feed regulation on all 3 axes, coolant unit, central lubrication, technical documentation, leveling feet, safety equipment (optional) Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines undergo thorough inspection - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your selected machine - If required, you can order additional accessories such as tools, etc., directly - We can also install further equipment such as safety devices upon request Gedpfx Aspy Eldegbsbg - We are happy to handle shipping and/or installation

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 20186/2006/01, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 325 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 7,200 mm, feed length Y-axis: 480 mm, feed length Z-axis: 325 mm, controller manufacturer: Elumatec, workpiece length (max.): 7,200 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 5,500 W, number of spindles: 1, number of slots in tool magazine: 8, input voltage: 400 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, 2006 Elumatec SBZ 130 Profile Machining Centre – High-Performance Aluminium CNC Machine 📍 Location: Ireland 🛠️ Machine Type: 3-Axis CNC Profile Machining Centre 📅 Year of Manufacture: 2006 ✅ Condition: Very Good / Fully Operational 🔧 Brand: Elumatec – German Engineering Excellence 🔧 Machine Description: The Elumatec SBZ 130 is a high-precision CNC profile machining centre designed for efficient and versatile processing of aluminium, steel, and stainless steel profiles. With fully automatic 3-axis control and flexible machining capabilities, it's ideal for manufacturers in the window, door, façade, and industrial profile fabrication sectors. 🧰 Included Features & Equipment: Automatic Tool Turret with 8 Tool Positions • Holds standard tools or angle milling heads • Rapid rotation ensures minimal tool change times 2 x Angle Milling Heads – included for advanced profile cutting Automatic Length Measurement – improves precision and workflow Two Independent Machining Zones – for pendulum operation and non-stop production Tool Spindle with Additional Axis Functionality – enhances machining flexibility All Operations Performed with Stationary Profile Bar • Protects profile surface during milling, drilling, and threading Multi-position Pneumatic Clamping System Coolant & Minimum Quantity Lubrication System (MQL) Tool Holders in photos Included This 2006 model is in very good condition, fully functional, and ready to be put into service. 📐 Technical Specifications: X-axis Travel (Longitudinal): 7,200 mm Y-axis Travel (Transverse): 480 mm Z-axis Travel (Vertical): 325 mm Spindle Power: 5.5 kW Max Spindle Speed: 6,000 rpm X Axis Rapid Traverse: 60 m/min Y Axis Rapid Traverse: 30 m/min Z Axis Rapid Traverse: 30 m/min Tool Changer: Automatic 8 position magazine Angle Milling Heads: 2 Angle Milling Heads Speed: 10,000 rpm Control System: Elumatec ELMU with full NC control Machining Capabilities: • Drilling, Routing, Tapping, Notching, Slotting • Machining on 3 sides of the profile without repositioning Clamping System: Pneumatic profile clamps (movable and programmable) Compressed Air Connection: 7 Bar Compressed Air Consumption: 75 L/min with spraying Cooling/Lubrication: Minimum quantity lubrication (MQL) system Operation: Front-loading with safety light curtain 🧰 Machine Includes: Multi-position automatic tool changer Angle Milling Heads x 2 Pneumatic profile clamping system Cooling/lubrication system Operator control console Selection of tool holders as seen in photos 💡 Key Features & Benefits: German-built machine with exceptional reliability High-speed 3-axis control for complex machining tasks Machining without profile repositioning – improved productivity Perfect for aluminium window & door fabrication, curtain wall profiles, industrial extrusion machining Can be integrated into automated production lines Ready to work – tested Elumatec SBZ 130 for sale Gbodpfxjwwau Ns Agbjg used Elumatec machining centre CNC aluminium profile machining centre 3 axis profile router, aluminium window door CNC machine Elumatec CNC machine Ireland CNC notching machine used façade profile machine high-speed CNC profile mill Elumatec SBZ CNC profile router

Year of construction: 2007, condition: used, 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Gsdpfx Ajw Axfqegbobg Max. travel X-axis: 4200 mm Max. travel Y-axis: 480 mm Max. travel Z-axis: 325 mm E 500 control Speed infinitely adjustable up to 6,000 rpm handheld control unit minimum quantity spraying Double-sided angle head and a high-speed spindle Tensioner detection 8 pneumatic material clamps Light barrier

Year of construction: 1977, condition: refurbished (used), I sell the double mitre saw Rapid DGS, year 1977. Tilting heads Drilling front heads on each side included Gbsdped N Rb Defx Agbsg Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 302827, Federhenn rod-profile machining center (drilling and milling) SBZ 100G - TO BE SOLD IN LINE WITH 1 SCHIRMER NC-SAW 1000-G4 YEAR 2014 (COMPLETE LINE) SEE SCHIRMER ADVERTISMENT....!! Gbjdpewnpa Nefx Agbsg NC feeder device with gripper max 200 m/min - max profiles 3500 mm.. The gripper can be adjusted pneumatically in 2 axes for adaptation to different profile geometries. Machining station designed as a G-module with 2 servo axes in Y and Z direction. Prepared for accommodating up to 14 processing units for complete processing of PVC, frame, post and frame profiles - outfeeder with table 2500x1500 mm.. PC-control C 6140, display, software SBZ 100G, PLC+NC. Modem remote diagnosis. Loading magazine with 9 places (9 profiles 3500 mm) designed for frame profiles max 127 mm width. Barcode scanner - Horizontal belt conveyor with 9 transport beams that can be adjusted continuously. 18 m/min - 3000 x 2400 mm - units: screw unit, 2 x drilling unit for dowel or post holes, 2 x drilling unit for fixing holes 16,750 rpm, 2 x additional processing (marking the closing part), drilling unit for front door fittings (opens inwards), drilling unit for olive hole drilling (3 sp), milling unit lock case. 2 pcs milling unit for milling and drilling drain slots and ventilation holes. 1 ditto obliquely arranged. 1 swivel device (MD and AD window systems. Milling unit for milling PZ and handle hole pattern

Condition: new, Year of construction: 2025, flue capacity: 510 kW Conventional yeld capacity: 407 kW flue diameter: 250 mm hot air delivery pipes: 4 x 350 mm flue length: 1900 mm oven width: 900 mm oven hight: 900 mm air flow: 26000 m³/h power consumption: 4500 W Godpjk Utrwefx Agbjbg aproximate surface to heat up: 8000 m³ area to be heated: 1800 m² heater height without hot air conveying pipes: 3000 mm heater width: 1220 mm heater length: 2700 mm weight: 1575 kg