End milling machine

Elumatec AF 222

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20404, elumatec AF 222 For machining transoms and door profiles made of aluminium or plastic Manual feed of the routing unit Large cutting range of up to 400 mm Continuously adjustable table height The material stop can be pivoted up to 60° to the left and right. Notching up to 30° (acute angles, left and right). Detent at 90° with index pin. With quick tool change system and "Spindle Lock" for easy tool changing Precise, smooth-action and low-wear recirculating ball guides Horizontal and vertical pneumatic material clamping provides flexibility Adjustable depth stop Pulsed coolant system Cutting tool diameter max. 280 mm Cutter bore 40 mm Profile height max. 165 mm Cutting height 145 mm Cutting depth 110 mm Cutting length 400 mm Pedjy Hcb Depfx Amkept Spindle speed 2,800 rpm Travel 550 mm 2.5 kW of power at 400 V / 50 Hz Compressed air supply 7 bar Power output 2 kW Air consumption 10 l per working cycle, 20 l with minimum-volume lubrication system Length 1,540 mm, depth 905 mm, height 1,000 mm, weight 248 kg Machine is ready for operation. Tool was sharpened

Condition: refurbished (used), Year of construction: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Saw blade max. carbide: 500 mm Drive power saw motor: 4 KW Saw motor speed: 2800 min-1 Cutting speed saw blade 500 mm: 4400 m/min Saw height control: infinitely variable, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat: 90° max.: 190 x 130 mm Working range round: 90° max.:150 mm Podpfx Aouiy Nyomkspt Pneumatic feed length: 5-560, 10-1120 mm Compressed air connection, on site 6 bar Weight(saw)approx.: 800 kg Dimensions LxWxH (saw)approx.:2900mm x 1400mm x 1500mm Installation area LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4KW Retrofit Elumatec SA 142 4KW Retrofit Fully automatic sawing machine for non-ferrous metal and plastic After completion of the retrofit, the machine is in mint condition, both technically and visually. The machine will be overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI control panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Maintenance of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Extension of the sawing area to flat 90° max.: 300 x 120 mm - Splitting extension (for a high-quality cut surface without return marks) - Servo-controlled material feed - Saw blade feed Servo-controlled - Mass clamping device Feed vice - Delivery and installation on your premises - Training of your employees

Year of construction: 1997, condition: excellent (used), functionality: fully functional, - Maximum cutter diameter: 280 mm - Cutter bore: 40 mm - Manual feed - Maximum profile height: 200 mm Milling area: - Length: 400 mm - Depth: 110 mm - Height: up to 150 mm Podpfx Amsyyma Rjkjpt - Power: 2.5 kW at 400 V/50 Hz - Milling spindle speed: 2,800 rpm - Compressed air connection: 7 bar - Air consumption: 10 l per work cycle, 20 l with minimum quantity lubrication - Dimensions (L x W x H): 1,540 mm x 905 mm x 1,200 mm, weight: 248 kg

Condition: new, round material 30 x 1 mm square material 30 x 30 x 1 mm 16 mm 30 x 10 mm speeds 9 U/min total power requirement 1,1 kW weight of the machine ca. 0,32 t Ppjdpfx Ameh D Svnekst dimensions of the machine ca. 0,82 x 0,60 x 1,26 m Electric roller profile with - 5 set of rollers 2x 20mm and 30mm for round material, 1x for flat material 1x for square material 1x for? - footswitch

Condition: excellent (used), functionality: fully functional, shelf length 3500 mm shelf width 1300 mm 8 hydraulic cylinders cylinder diameter 85 mm Ppsdpfx Amoyxwzcjkot integrated oil heating power supply 380V

Year of construction: 2012, condition: excellent (used), functionality: fully functional, - Power (kW): KFB 353 = 1.5 - Voltage (V): 400 - Air pressure (bar): 7 - Air consumption (l/min): min. 250 - Revolution shaft (min-1): KFB 353 = 12,000 - Maximum cross section of the workpiece WxH(mm):190x111 - Milling range L x W (mm): 300 x 130 - Milling depth (mm): 200 Pjdpfx Amewzivdjkjpt - Machine dimensions L x D x H (mm): 3,500 x 820 x 1,650 Dpro2J - Weight (kg): approx. 420 - Workable material: KFB 353 = PVC and aluminum profiles

Condition: excellent (used), Copy milling machine Elumatec type KF 78/60 EU shipping - 350 euro Ppsdpfxsvi R Ave Amkot

Condition: used, the working length up to 2600 mm Steel sheet up to 0.7 mm Ppjdpodphv Refx Amket

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 521 S ÜÇLÜ SU TAHLİYE MAKİNESİ YÜKSEK FREKANS MOTORLU, - Possibility of opening water drainage channels for PVC and Aluminum Profiles Ppodpjra Nrqofx Amkot - Possibility for three groups to work separately - Ability of the water drainage system to operate in an angled position - Pneumatic profile clamping system - Fully automated system operation - More efficient and long-term operation with high frequency motors (18000 rpm) - Vibration-free and better quality grooving due to high frequency motor

Condition: used, Year of construction: 2013, Numerical control PC Office with Widge Plus software Machine suitable for 1st + 2nd passage of the panel Mobile shoulder opening motorized by N.C. mm 3200 Panel width min - max mm 215 - 3200 Min - max panel height mm 10 - 60 Edge thickness in roll min - max PVC-ABS mm 0,3 - 3 Continuously variable feed speed 10 - 40 m\min Motorized pressure rubber belt Bearing track with retractable pin Ppodpfsk Egvdsx Amket Pin height 12 - 18 - 25 mm Distance between the retractable pins mm 500 \ 400 Working groups mounted on NC motorized overtables Squaring part composed of (for each side): Anti-adhesive group Timed automatic anti-splinter group Double Hogger group Edging part composed of (for each side): Gluing unit with pre-melter for PUR glue and pre-melter for EVA glue Edge pressure rollers electronically controlled by N.C. Edge holder magazine with 6 positions End Cutting unit with two motors Rough trimming unit with 2 motors Fine trimming unit with 2 motors electronically controlled by NC Rounding unit with 4 motors 0-90° tilting grooving group electronically controlled by CN (movable shoulder 0-90° tilting grooving group + double superimposed grooving unit (fixed shoulder) Anti-adhesive groups Edge scraper unit Glue scraping unit Brush group Phon group