Rotary table surface grinding machine

ELB-SCHLIFF ROTARY 50 SPS-NK

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, overall weight: 2,500 kg, The machine can be tested under power. Gusdew Idwzepfx Ag Dsk

Condition: used, Year of construction: 1998, honing diameter 90 mm stroke 490 mm Godpfot Hw T Sjx Ag Deuk throat 400 mm total power requirement 10 kW weight of the machine ca. 3.500 kg dimensions of the machine ca. m

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Gedjfxyh Rspfx Ag Douk Pressing speed:10 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? :2400 ? :1200 ? :1200 ?

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 4304, rotary table diameter: 600 mm, grinding height: 450 mm, overall weight: 14,500 kg, Machine is equipped with 3 spindles, surface grinding, external grinding, bore grinding Guodpfxjvt A Rto Ag Djk Turret head B-axis with 1° division Belt filter system included

Condition: used, Year of construction: 2000, max. workpiece diameter 40 mm min. workpiece diameter 10 mm workpiece length 200 - 640 mm Control SPS Siemens S5 95 U total power requirement 25 kW weight of the machine ca. 5 t dimensions of the machine ca. 8,5 x 2,8 x 2,35 m Hydraulic cutting and double-end machining machine suitable for pre-machining trapezoidal thread spindles and other round workpieces in the form of sawing off the bar and double-sided end machining such as chamfering, countersinking and drilling with fixed parts and rotating tools. Machine consisting of: - Basic machine model TR 60/4-650, passage 640 mm - Bar magazine for bar lengths 2 - 3.5 m - Normal version for solid material up to ? 40 mm - Central position of the bar feed rollers - Bar feed unit - Feed gripper in standard version - Cross switch with 4 clamping stations model TR 300.00 - 4 base jaws, width 80/140 mm, contact ? 75 mm - Swiveling cross switch in both directions - Saw unit with worm drive TR 200.00, stroke 100 mm - Saw blade 350 mm, speed 25/39 rpm - Motor power 2.6/3.2 kW - Motorized positioning of saw head - Automatic positioning of saw stand with hydraulic. Clamping - Saw blade guide - Processing unit no. 1 - USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Machining unit no. 3 - USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Machining unit no. 4 - USP.00/M - Speeds 943/1882 rpm, kW 3.3/4.0 Godpfxsvp Sd Is Ag Douk - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Unloading chute - Millimeter bars for all adjustment movements - Hydraulic system with feed pump SAUER SUNDSTRAND - Pressure accumulator - Rexroth flow regulator for machining units and saw - Coolant system with filter and container - Coolant pump CALPERA - Electrical equipment in separate electrical control cabinet, Control voltage 24V/50 Hz - PLC SIEMENS S5 95 U - Machine light - Flashing light to signal machine downtime - Central lubrication - Chip conveyor. In 2011, an extensive mechanical overhaul was carried out to optimize positioning and centering accuracy for € 25.000. In addition, switches, some cables, ball bearings, seals, hydraulic hoses, etc. were replaced. The machine has hardly been used in recent years; the seller estimates the whole operating hours at around 24,000. Machine under power in sellers factory. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 30013012, 27.10 25: Machine currently in serial production. Shutdown planned for mid-2026. Please state your offer price. Sale only within Europe, including Turkey. Gujdpfoth Sc Hjx Ag Dek ----- For technical data, see handout. Without packaging; any warranty rights are excluded. Should you wish to dismantle the system yourself, please indicate this in your bid. We do not assume any liability for the accuracy of the technical data, the completeness of accessories and tool equipment, nor for compliance with all safety and environmental protection requirements as specified in accident prevention regulations.

Condition: used, Year of construction: 2006, grinding length 800 mm grinding width mm workpiece height 400 mm Control Gjdpfx Aevkiutjg Djuk total power requirement 60 kW weight of the machine ca. 17 t dimensions of the machine ca. m

Condition: used, Year of construction: 2007, pressure 20 - 300 kN adjustment of rolling slide 50 mm diameter of rolling spindle 120 mm roll spindle height over machine bed 200 mm Control SIN 840 D taper length of the roll spindle 200 mm rolling spindle turning speeds 0 - 50 1/min torque per rolling spindle 2700 Nm power capacity 2 x 8,4 kW Guedpow E Nmkefx Ag Djk distance between rolling spindles min. 271 / max. 368 mm rolling tool outer diameter max. 300 mm total power requirement 26 kW weight of the machine ca. 7,1 t dimensions of the machine ca. 9,70 x 4,50 x 3,80 m CNC machine for gear cold rolling / thread rolling Hydraulic rolling process Felsomat loader cell Complete housing

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 1000-4.15.12, Lapping Machine ELP 1000/4 Serial No.: 1000-4.15.12 Year of Manufacture: 2012 Outer Diameter of Work Disc: 1,020 mm Outer Diameter of Leveling Ring: 368 mm Number of Working Stations: 4 units Lapping Plate Rotational Speed: 80 rpm Infinitely Variable Speed Control: 0–80 rpm Drive Power: 4 kW Voltage: 400 V Control Voltage: 24 V DC Gjdsx Eznyjpfx Ag Djuk Control System: Simatic S7 Dimensions (L x W x H): 1,925 mm x 1,400 mm x 2,011 mm Noise Emission Level: 70 dBA Continuously Adjustable Lapping Pump: CA4, SB-3V Immersion Pump: TB25/220, 2,700 rpm Tank for Grinding and Polishing Media: 15 l Coolant Consumption: Closed circuit

Year of construction: 1996, condition: good (used), functionality: fully functional, machine/vehicle number: 009005005, TECHNICAL DETAILS working range: 2 - 200 mm bar length: 500 mm dressing speed: 500 rpm control: Siemens 840 C control wheel width: 400 mm control wheel bore: 152 mm regulating wheel diameter: 350 mm control wheel speed: 10-150 rpm Control wheel drive: 11,3 kW grinding wheel width: max. 400 mm grinding wheel diameter: max. 660 mm grinding wheel bore diameter: 304.8 mm grinding wheel speed: 63 m/s Grinding wheel drive: 45 kW Gusdpolmm Evjfx Ag Dok MACHINE DETAILS weight: 10 t Connection: 400 V / 50 Hz / 3 phases Rated power: 115 kW