Mobile former

ECKOLD MZ 10

Condition: used, Year of construction: 2014, Throat depth: 22 mm, Hydraulic mobile flanging pliers, ECKOLD type MZ 10 Machine # 900014106 Year of manufacture 2014 Technical data: Bnq7Sgxxn2J max. pressure force 30 kN throat depth hor. 22 mm Projection vert. 29 mm max. sheet thickness 3.0 mm External dimensions approx. 236 x 140 x 178 mm With - 6.0 m hydraulic hose - two-hand safety circuit used, in very good condition

Condition: used, Throat depth: 22 mm, Hydraulic mobile flanging pliers, ECKOLD type MZ 10 Bnq7U7Fmneg Technical data max. pressure force 30 kN throat depth hor. 22 mm throat depth vert. 29 mm max. sheet thickness 3.0 mm external dimensions approx. 236 x 140 x 178 mm used, in good condition

Condition: used, Year of construction: 1993, Punching force: 3 t, Hydraulic punching pliers, ECKOLD type ML 10/25 Serial # 1389/2657, year of manufacture 1993 designed and adapted for re-punching the folded sheet metal protrusions on air duct flanges Bnq7Rf8Wdc8 Technical data: Punching pliers: max. pressure force 3 Mp designed for hole diameter 9.5 mm in 1.0 mm VA horizontal tool projection 25 mm used in good condition

Condition: good (used), Year of construction: 1990, Machine/vehicle number: 90/545, Offer 23132 Bk8Mw0Zwp9K Technical data: - with ECKOLD pressure joining pliers, type MZ 20 - Working pressure infinitely variable max. up to 400 bar - Single cycle or continuous cycle - Infinitely variable number of cycles - Hydraulic oil capacity 15 ltr - Drive 400 V / 3 kW - Space requirement approx. W 550 x H 850 x D 650 mm - Weight approx. 150 kg

Condition: good (used), Double-acting universal portal press make ECKOLD type UPP 60-10 Machine # 646/230 with hydraulic unit HAD 500/2 machine # 276/477, year of construction 1983 technical data: max. pressing force 60 t passage between the uprights 1600 mm cylinder stroke 100 mm table top 1100 x 800 mm installation height 650 mm with - tools for the production of drain pots for floor drainage, 3 sizes are available - double acting cylinders - stop device length 700 mm - tool for necking blanks AW 200 diameter 200 mm, 1,5 t, 2,0 mm - holding down device - Drawing tool NW 200 type ZW diameter 200 mm, 1,5 t, 2,0 mm Nmlduuabo - T-slots in table used, in good condition

Year of construction: 1993, Condition: good (used), Offer 23100 Technical data: - Pressure capacity steel 2 to 4 mm Yxlvwk - pressure capacity INOX 2 to 3 mm - Horizontal throat 30 mm - Throat vertical 40 mm - Hydr. aggregate make NOLD type No40.9-4 year 93 - pressure capacity 250 bar - Drive 400 V / 4 kW - Space requirement W 600 x H 800 x D 900 mm - weight approx. 350 kg

Year of construction: 1998, Condition: good (used), The device in constant use. I have 4 pieces for sale. Nssiu3T0

Condition: used, Sheet thickness steel (max.): 3 mm, Hydr. mobile clinching pliers, ECKOLD type MZD 25/3 Boqiv307Kg Serial # 1267/237 Year of manufacture 2003 Technical data: Compressive force 30 kN max. sheet thickness 3.0 mm Tool projection hor. 25 / 35 mm Tool projection vert. 15 mm Stroke 6.0 mm width of pliers 50 mm Weight approx. 4.5 kg With - one-hand operation - 6.0 m hydraulic hose - can only be used with ECKOLD hydraulic unit used, ready for operation

Condition: used, Throat depth: 60 mm, Working stroke: 6 mm, Pressure joining pliers / clinching pliers ECKOLD type MZD 60/6 D Technical data max. pressure force 60 kN horizontal throat depth 60 mm vertical throat depth 40 mm Opening travel 45 mm Stroke in working range 6.0 mm Width of pliers in working range 48 / 60 mm Weight approx. 34 kg With Hu2Leo8 - Tool carrier type I - 3.0 m hydraulic hose - Rotatable suspension - without hydraulic unit used, in good condition

Condition: used, Year of construction: 1989, Operating pressure: 550 bar, ECKOLD type MAR 120/15 pipe collaring device Machine. # 1067/1373 with hydraulic unit HA 500/2 Machine. # 628/237 Year of construction 1989 Technical data: throat range 25 - 100 mm max. pressure 550 bar without tools with - mobile hydraulics type HA 500/2 Dout0N used, from a business liquidation, in good condition

Condition: used, Operating pressure: 500 bar, Working range: 3 mm, Pressure joining pliers make ECKOLD type MZD 25/3 Machine # 794980 with mobile hydraulic unit type HA 550 Machine # 286/525 Technical data: Compressive force 30 kN Operating pressure 500 bar max. sheet thickness St. 3.0 mm Max. sheet thickness AL 3.0 mm Designed for DF variant S-DF Hydraulic hose length 6 m Weight approx. 4.5 kg Power unit output 500 bar External dimensions approx. 600 x 500 x 700 mm With - mobile Bnq7Wyyxse0 - Pressure joining pliers type MZD 35 machine # 457/287 - many blades for joining tongs used, in good condition

Condition: used, Year of construction: 2002, Throat depth: 35 mm, Pneumatic mobile clinching pliers, ECKOLD type MZD 35/35 Year of manufacture 2002 Technical data: Compressive force 35 kN Operating pressure 360 bar Oiopy9J Air consumption 6.0 l/stroke Joining capacity 3.0 mm Projection hor. 35 mm Projection vert. 82/50 mm Opening dimension 6.0 mm Hand-operated opening travel 23 mm Width in working area 25 mm Weight approx. 3.5 kg External dimensions approx. 335 x 42 x 155 mm used, in good condition €

Condition: used, Throat depth: 60 mm, Operating pressure: 550 bar, Hydraulic pressure joining pliers, ECKOLD type MZD 35/6 B Machine # 1346/2447 with hydraulic unit type HAT 550 machine # 796/076 and TECNA weight compensator Year of manufacture 1992 Technical data: Joining capacity steel 2 x 2.0 mm Aluminum 2 x 2.0 mm VA 2 x 1.25 mm Projection 60 mm Pressure capacity 550 bar Oil flow rate 0.9 l/min. Weight of the unit 35 kg Rdn7Bgumnd With - Pressure joining pliers with univ. handle for two-hand release with safety relay - Hydraulic connection hose - Hydraulic power pack HAT 550 - Weight compensator (balancer) used, in good condition

Condition: used, Operating pressure: 500 bar, Working range: 3 mm, Pressure joining pliers make ECKOLD type MZD 25/3 Machine # 740701 with mobile hydraulic unit type HA 550 Technical data: Compressive force 30 kN Operating pressure 500 bar max. sheet thickness St. 3.0 mm Max. sheet thickness AL 3.0 mm Designed for DF variant S-DF Hydraulic hose length 6 m Weight approx. 4.5 kg Rdn3Dm8Z3Z Power unit output 500 bar External dimensions approx. 600 x 500 x 700 mm With - mobile - Pressure joining pliers type MZD 35 little used, in very good condition

Condition: used, SKU : 057K166 Location : Barneveld Make : Fryma Type : MZ 100 No. : M 14738 Year of construction : 1991 Main Features Material : Stainless steel Motor : 5.5 KW Specified Features - Colloid mill Material : Stainless steel Colloid mill : (1x) Rotor sizes : Dia. 100mm, Smooth rotor B8Mnu29Rav Motor : 5,5 KW, 380 Volt With switchgear : check Extra Specifications : With pressure and temperature measuring points on the house. Technical specs Extra information : smooth rotor What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Please visit our Foeth website for more information about this machine.

Year of construction: 2011, Condition: as good as new (ex-display), Functionality: fully functional, NEW FILTER PRESS WITH AUTOMATIC UNLOADING OF 10M2 OF FILTRANSTE® FABRIC SURFACE AREA Dptfjf

Condition: used, Year of construction: 1999, Capacity of pure liquid: approx. 1000 l Capacity pure liquid: approx. 450 L number of revolutions: 3000 rpm, Sd8Propssh Drum speed: 3720 rpm., Rotor speed: 3400 rpm, rotor diameter: 379 mm Rotor diameter: 310 mm flow: 180 l/min., Inlet height: 450 mm Medium temp.: 10 - 50 ° C Solid quantity max.: 15 kg Solid amount max.: 6 kg Connected load approx.: 20 kW (400 V/50 Hz) Weight approx.: 1100 kg Dimensions W x D x H: 1200 x 1450x 1900 mm colour: Gray Suitable for cleaning cooling emulsions and cooling oils using an integrated centrifuge unit. The coolant is kept at a constant temperature throughout the entire production process by the integrated cooling unit. Accessories: Hyfra cooling unit TRK 110

Condition: new, Kollmorgen Servostar CD servo controller, PRD MZ10B00z 0S, CB10661 MZ Model:  PRDMZ10B00z0S, CB10661MZ   MANZ No.:  80010473 Manz type:  Servo Drive 5260-S10E/S   Version type: B F/W: 7.5.7b   Input voltage: 380/480V AC, 50/60Hz Input current: 16A/ph Bcs3P2Qvn Input power: 10/13kW Output voltage: 520/650V AC Output current: 10A/ph Output power: 5,2/6,5kW

Condition: used, Line regulating valve, shut-off valve, pressure relief valve, shut-off valve, safety shut-off valve, safety relief valve, pressure monitor, pressure switch, pressure regulator, gas pressure regulator, gas pressure regulator, flow meter, flow meter, gas meter, quantometer -Manufacturer: ltron, volume gas meter B38Ccnudk -Type: MZ 100 DN 100 -Qmax: 650 m3 / h -Qmin: 40 m3 / h -Pmax: 10 bar -Dimension: 220/145 / H300 mm -Weight: 15.7 kg

Year of construction: 2003, Condition: excellent (used), Machine/vehicle number: MBUT133-544, DEMAG KBK crane canopy crane runway with dimensions approx. 10.5 x 6m Payload / lifting capacity 500 KG - 0.5to Technical data of the system: Crane runway made of Demag KBK1/2 rails System is supplied complete: KBK rails, rail joiners, trolleys, end plates, cable trailing, brackets incl. steel 500KG chain hoist - lifting height approx. 3m Crane is dismantled and immediately available Ccbxtds Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: used, Automatic DIE Cutter TMZ EW-106 with Stripping UnitBaujahr / Year 1995 - Serial-No. 2643 Format / Sheet Size min. 450 x 450mm - max. 760 x 1060mm Dicke / Thickness min. 200g/m²- max. 2.000g/m² Kartondicke / Thickness corrugated max. 6mm Geschwindigkeit / Production per hour 6.000g/h Stanzkraft / Pressure total max. 300Tm Dimensions of machne L 4600mm x W 2300mm x H 2080mm Approximate net weight 13.500KGSWith Stripping Unit and double Sheet control. Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Hylahzsj Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Year of construction: 2021, Operating hours: 765 h, Condition: ready for operation (used), Control Unit Brand FANUC Main Drive Spindle speed range 3000 - 12,000 Additional Equipment Motorized turrets Boring bar holders Various tool holders This 3-axis CMZ TA 30 TY 1100 lathe was manufactured in 2021. It features a FANUC CNC system, an Autoblock chuck with a 300 mm diameter, and a bar passage of 80 mm. The machine offers a maximum turning length of 1100 mm and includes a 12-place tool turret, both axial and radial motorized units, and a Y-axis for milling. With only 765 hours worked, this CMZ TA 30 TY 1100 represents a significant opportunity. Contact us for more information. Sgvmpgayxl Application Types Turning

Year of construction: 1983, Condition: excellent (used), Machine/vehicle number: 20020233 UG 1 Brücke, DEMAG KBK crane canopy crane runway with dimensions approx. 29 x 6m (6m bridge - double girder crane) Payload / lifting capacity 1000 KG - 1to Technical data of the system: Crane runway made of Demag KBK2 rails with internal current routing System is supplied complete: KBK rails, rail joiners, trolleys, end plates, cable trailing, brackets/hangers etc. Shnsm7Molb incl. Demag PK5 - 1000KG chain hoist - lifting height approx. 4m Crane is disassembled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Year of construction: 1987, Condition: excellent (used), Machine/vehicle number: 20020231 EG 1 Brücke, DEMAG KBK crane canopy crane runway with dimensions approx. 35 x 6m (6m bridge - double girder crane) Payload / lifting capacity 1000 KG - 1to Technical data of the system: Crane runway made of Demag KBK2 rails with internal current routing System is supplied complete: KBK rails, rail joiners, trolleys, end plates, cable trailing, brackets/hangers etc. incl. Demag PK5 - 1000KG chain hoist - lifting height approx. 4m Crane is disassembled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Gomoss Please ask for your crane runway with load capacity and dimensions without obligation.

Year of construction: 2001, Condition: excellent (used), Machine/vehicle number: 20020232 EG 1 Brücke, DEMAG KBK crane canopy crane runway with dimensions approx. 31 x 6m (6m bridge - double girder crane) Payload / lifting capacity 1000 KG - 1to Technical data of the system: Crane runway made of Demag KBK2 rails with internal current routing System is supplied complete: KBK rails, rail joiners, trolleys, end plates, cable trailing, brackets/hangers etc. Shnqrkbjkn incl. Demag DK5 - 1000KG chain hoist - lifting height approx. 4m Crane is disassembled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.