Eckold Kraftformers Piccolo ECKOLD KF324

ECKOLD KF 324

Condition: good (used), Year of construction: 1993, total width: 680 mm, total length: 1,215 mm, total height: 1,740 mm, sheet thickness aluminum (max.): 2 mm, overall weight: 505 kg, sheet thickness steel (max.): 1 mm, Eckold Kraftformers Piccolo ECKOLD - KF 324 Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening For Aircraft production and Maintenance. For Car body shop specialists For Artisans and Craftmen Equipped with tool storage shelf in side column Bsdpfxsz Ha Dkj Amrswu Machine equipped for tooling: FWR 402S FWA 403S   Number of strokes: 400Min. Maximum sheet thickness: 2,0mm Horizontal troath: 340mm Vertical troath: 245mm Max. thickness Stainles: 1,5mm Max. thickness Aluminium: 2,5mm Manuel / Hand ram adjustment:32 Power: 1,5kW Length: 1215mm Width: 680mm Height: 1740mm Weight: 505kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm Bwodpfou Nc Risx Amrsu z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t compressed air: 6,3 bar dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *

Condition: good (used), Year of construction: 2001, total width: 680 mm, total length: 1,215 mm, total height: 1,740 mm, sheet thickness aluminum (max.): 2 mm, overall weight: 505 kg, sheet thickness steel (max.): 1 mm, Eckold Kraftformers Piccolo ECKOLD - KF 324 Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening For Aircraft production and Maintenance. For Car body shop specialists For Artisans and Craftmen Equipped with tool storage shelf in side column Machine equipped for tooling: FWR 402S FWA 403S Bedpfxez Ha Age Amrewu Number of strokes: 400Min. Maximum sheet thickness: 2,0mm Horizontal troath: 340mm Vertical troath: 245mm Max. thickness Stainles: 1,5mm Max. thickness Aluminium: 2,5mm Manuel / Hand ram adjustment:32 mm Power: 1,5kW Length: 1215mm Width: 680mm Height: 1740mm Weight: 505kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Technical details: table length: 3600 mm table width: 3600 mm table load: 50 t table travel: 2000 längs / longitudinal mm Bwedpfx Aeu N D Rqjmrou table height over floor: 1350 mm table speed: ca. 1000 mm/min table rotating: 360 ° total power requirement: 14 kW weight of the machine ca.: 38,5 t dimension machine xH: 5,5x3,7x1,4 m space requirements of the machine approx.: 6,2x3,7x1,4 m Main areas of application: -Multi-sided machining -Supplement for travelling column milling machines or boring mills Electric and mechanics of the Rotary Table have been overhauled. - newly equipped with a digital measuring system (DRO) for x-travel and rotation - control via control panel - table clamping plate 14t weight - table load capacity 50t 11 pcs T-slots according DIN 650: - a=42mm - h=75mm - b=70mm - c=31mm Rotary Table can be inspected under power! Following work has been proceeded: - Integration of a Digital Read Out (DRO) for the x axis and a rotary encoder for C-axis - integration of a control via a control panel - renewal of hydraulic pipes / hoses, screw connections, manometers, flow chokes and filters - bearing of both axis transmissions - control cabinet and complete machine cabling has been renewed - end positions cleaned, checked, adjusted and defective replaced by new ones - frequency converter for continuous speed retrofitted - preparation of the necessary documentation (operating instructions, electrical and hydraulic diagram) - cracked gearbox housing repaired via casting lock - renewal of the guideway wipers - processing of the guideway cover including new wipers - machine has been repainted - renewal of axis drives - feed gear cleaned and resealed - feed motor new bearing installed *

Condition: used, Technical details: table length: 4000 mm table width: 4000 mm Bodeu N D Tlepfx Amrswu table load: 100 t table adjustment - longitudinal: U-Achse: 2000 mm table rotating: B-Achse: 360 ° rapid traverse longitudinal: U-Achse: 6000 mm/min mm/min. rapid traverse:: B-Achse: 0,05 - 2 U/min U/min Rotary table The U and B axes are equipped with hydrostatic guides. Hydrostatic or bearing support : Hydrostatic support. Ø of the fifth wheel : 2.190 mm Hydraulic locks - 3 hydrostatic guideways for longitudinal movement - 1 hydrostatic circular guideway for the rotation axis Positioning system: - Heidenhain angle encoder for the B axis - Heidenhain optical scale for the U axis The servo motors, the control cabinet and a panel are not included in the scope of delivery. *

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, table length: 2,100 mm, table width: 1,100 mm, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, Equipment: rotational speed infinitely variable, CNC Gantry Milling Machine Gualdoni GDV-400 – Year 2018 – Fully Functional – Turin (TO) Gualdoni GDV-400 CNC gantry milling machine, year 2018, in good condition and fully operational. Fixed gantry structure with longitudinal moving table, ideal for machining large workpieces. Available for inspection and testing by appointment in Turin. Main technical data: - X-axis travel (longitudinal): 2,000 mm - Y-axis travel (cross): 1,100 mm - Z-axis travel (vertical): 900 mm - Table dimensions: 1,100 × 2,100 mm - Installed power: approx. 45 kW - Spindle speed: 100 – 10,000 rpm (stepless adjustment) - Tool holder interface: ISO 40 (DIN 69871) Bwjdpfx Asy A Tuyjmrou - Rapid traverse X/Y/Z: 20,000 / 20,000 / 20,000 mm/min - Feed rates: 10 – 5,000 mm/min - ATC tool magazine: 24 positions – 4 sec tool change - Max tool diameter: 106 mm | Max length: 300 mm - CNC control: FAGOR (ISO + conversational) - 3 controlled axes: X – Y – Z - Machine footprint: 7,500 × 3,000 × h 3,800 mm - CE compliant | Year: 2018

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, throat depth: 455 mm, total width: 860 mm, total length: 2,000 mm, total height: 2,050 mm, sheet thickness aluminum (max.): 8 mm, overall weight: 2,000 kg, sheet thickness steel (max.): 4 mm, Number of strokes 150 / 300 / 600 Min. Maximum sheet thickness 6 mm Horizontal troath 675 mm Vertical troath 455 mm Max. thickness Stainles 4 mm Max. thickness Aluminium 8 mm Motorised ram adjustment 0 - 80 Power 4.5 kW Bwedpfx Aozxf Eyjmrju Dimensions (Estimate) Length 2000 mm Width 860 mm Height 2050 mm Weight 2000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1988, total width: 810 mm, total length: 1,700 mm, total height: 1,700 mm, overall weight: 1,250 kg, Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening Machine equipped for tooling: FWR1307 FWA 1306 FWA 802T FWA 1002T LFA 120S LFA155T Bodpfszzmtkex Amrowu Number of strokes: 300 / 600Min. Maximum sheet thickness:4.0mm Horizontal troath: 460mm Vertical troath: 475mm Max. thickness Stainles:2.0mm Max. thickness Aluminium:5.0mm Motorised ram adjustment:0 - 60 Power: 3.0kW Length: 1700mm Width: 810mm Height: 1700mm Weight: 1250kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Eckold tool ECKOLD - KS 50 MACH-ID 3813 Bwjdpfx Aszc I Erjmrju Make: ECKOLD Type: KS 50 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2007, Eckold tool Bwjdjzc I D Uspfx Amrju ECKOLD MACH-ID 3819 Make: ECKOLD Year: 2007 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!