Plate Shear - Mechanical

DURMA MS 2003

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, cutting angle (min.): 2 °, cutting angle (max.): 12 °, stroke rate (min.): 35 1/min, sheet thickness steel (max.): 3 mm, section length (max.): 2,050 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting capacity Cutting length: 2,050 mm Cutting thickness: 3 mm Back gauge: 550 mm Cutting angle: 2° 12' Strokes per minute: 35 Gbsdpfxjw N Iumo Agbsg Worktable Table width: 400 mm Table height: 850 mm MACHINE DETAILS Motor power: 3 kW Dimensions & Weight Dimensions (L x W x H): 2,600 x 1,350 x 1,260 mm Weight: 1,280 kg

Year of construction: 1981, condition: good (used), machine/vehicle number: 3626, OFFER 21448 Technical data: - max. working width 2540 mm - max. cutting capacity St 40 4 mm - mot. cutting angle adjustment - cutting gap adjustment by scaled adjusting screws - number of hydraulic hold-downs 14 pcs. - motorized backgauge with positioning stop 10 - 1000 mm - Stroke rate depending on cutting angle and cutting length 23 per/min - hydraulic drive 400 V / 7,5 kW - table height 1030 mm - space requirement approx. W 2500 x H 1630 x D 2150 mm - weight approx. 3600 kg Gbsdehhc Ixspfx Agbjg - with: - pneum. supported sheet metal support - front angle stop + support arms - Electronic cutting depth adjustment - cutting line illumination - E-foot switch

Year of construction: 2024, condition: new, *image similar* Technical data Gbedpohk Ngcsfx Agbsg sheet length: 2.050 mm sheet thickness : 3 mm Total power requirement : 3 kW Dimension (LxWxH) 2,4 x 1,35 x 1,2 mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, We inform, that we currently only sell or deliver to the Gbodpfoxmgwajx Agbog D-A-CH and Be-Ne-Lux countries. We ask for your understanding

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 193 34-41, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,600 mm, table load: 2,500 kg, spindle diameter: 102 mm, spindle speed (min.): 4 rpm, spindle speed (max.): 1,600 rpm, total height: 3,500 mm, total length: 6,500 mm, total width: 4,700 mm, table length: 1,400 mm, table width: 1,250 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, The machine was overhauled and modernized in 2025 and is immediately ready for operation! Travel paths: - Table cross travel (X-axis): 1600 mm - Spindle head vertical travel (Y-axis): 1250 mm - Table longitudinal travel (Z-axis): 1475 mm (restriction due to large table) - Quill travel (W-axis): 710 mm - Table rotation (B-axis): 360 degrees Clamping table: - Clamping surface: 1250 x 1400 mm - Table load capacity: 2.5 t Spindle: - Diameter: 102 mm - Tool holder: DIN2080, SK 50 - Infinitely variable speed: 4 – 1600 rpm - Drive power: 13 kW Feed: - X, Y, Z axes, stepless: 1 – 4000 mm/min Rapid traverse: - X, Y, Z axes: 4 m/min Power consumption: 42 kW Weight: 10 t Space requirements (L x W x H): 6.5 x 4.7 x 3.5 m Godpfx Agjw Rn R Robsbg Equipment: - Heidenhain TNC 320 - Coolant device

Condition: good (used), Spindle diameter: 80 mm Spindle nose: SK50 Spindle speeds: 11 - 1000 RPM X-axis movement: 1700 mm Y-axis movement: 1800 mm Z-axis movement: 1800 mm Spindle out (W-axis): 710 mm Table size: 1100 x 900 mm Elbo Digital readout: On Y-axis and Z-axis Featured with: - Turning table - Toolholders Gbjdpfephl Ecsx Agbsg Spindle engine: 7,5 KW Machine LxWxH: 5100 x 2650 x 3300 mm Machine weight: 10 Ton

Condition: used, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,250 mm, spindle diameter: 110 mm, X-AXIS TRAVEL 2000 MM Y-STROKE VERTICAL 1400 MM Z-AXIS TRAVEL COLUMN: 1250 MM W-AXIS SPINDLE TRAVEL 710 MM TABLE 1400 X 1600 MM Gbsdpfex Da Slox Agbjg WORKPIECE LOAD 8000 KG SPINDLE SPEED 10 - 2000 RPM ISO 50 RAPID FEED X Y Z 10000 MM/MIN CNC HEIDENHAIN TNC 426 ATC 60 PLACES

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T Gbsdpfog Ewwrex Agbsg -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, Year of construction: 2026, HSBM 2020-20 SB - Manual swing bending machine HSBM SB - Manual swing bending machine in heavy design with segmented upper tools simple operation segmented upper tools swivel bending function with secure clamping of the workpiece by pretensioning of the upper beam heavy, compact welded construction for easy bending with exact adjustment of the bending angle by means of stop with scale particularly low-maintenance Segment division 25-30-35-40-45-75-100-150-200-200-270-400-400 Note on technical data: max. sheet thickness: performance data related to material with tensile strength 400N/mm²; bending capacity VA: factor 0,75; bending capacity Alu: factor 1,2; for bending VA hardened upper tools are required Model HSBM 2020-20 SB Article-No. 3772920 Gbedpecnxc Nefx Agbog Technical data working width max. 2.020 mm bending capacity max. steel 400 N/qmm 2 mm Bending capacity max. steel 400 N/qmm without cheek widening Bending capacity max. steel 400 N/qmm w. cheek widening Bending capacity max. stainless steel 1,5 mm Bending capacity max. aluminium 2,4 mm Bending angle max. 135 Segment division Clearance between upper and lower cheek max. 120 mm length 2500 mm width 710 mm height 1500 mm Weight 1.020 kg Location: Ex works - free on truck -

Condition: used, Year of construction: 2025, functionality: fully functional, total height: 6,000 mm, total width: 2,777 mm, total length: 3,112 mm, Equipment: documentation/manual, safety light barrier, SHUTTLE XP500 40 trays, 500 kg each Gbedpfx Agsxvccwsbsg Height 6000 mm and 5650 mm Ready to load, price loaded on truck Reassembly on request