CNC lathe

Doosan Puma 2600

Condition: used, Year of construction: 2011, - Doosan-Fanuc CNC control - Breuning-Irco ILS RBK 10012 bar feeder - Samchully MH-212 315 mm 3-jaw chuck - Samchully MH-206 175 mm 3-jaw chuck - Year of manufacture 2011 Technical specifications Capacity: Bljdpfxsuxua Io Aafsc - Swing over bed: 780 mm - Swing over carriage: 630 mm - Recommended turning diameter: 255 mm - Maximum turning diameter: 376 mm - Maximum turning length: 760 mm - Bar loading capacity: 76 mm Spindle: - Spindle speed (belt type): 3500 rpm - Spindle nose: ASA A2#8 - Spindle bearing diameter: 140 mm - Spindle bore Ø: 86 mm - Min. spindle indexing angle (C-axis): 0.001 ° - Counter spindle speed (integrated): 6000 rpm - Counter spindle nose: ASA A2-5 - Counter spindle bearing diameter (front): 90 mm - Counter spindle through hole diameter: 62 mm - Min. counter spindle indexing angle (C-axis): 0.001 ° Tool turret: - Number of tool stations: 12 - Tool outer diameter: 25 mm - Boring bar diameter: 50 mm - Indexing time (1st swivel time): 0.15 s - Spindle speed of the driven tools: 5000 rpm Feed rates: - X-axis: 260 (72+188) mm - Z-axis: 830 mm - Y-axis: 102 (± 51) mm - Rapid traverse X-axis: 30 m/min - Rapid traverse Z-axis: 30 m/min - Rapid traverse Y-axis: 10 m/min Motors: - Main spindle motor: 22 kW - Subspindle motor: 7.5 kW - Spindle for driven tools: 5.5 kW - Feed motors (X/Z/Y axes): 3.0 / 4.0 / 3.0 kW - Coolant pump: 0.4 kW Electrical connection: - Power supply: 54.55 kVA Dimensions: - Machine dimensions WxHxD: 3600 x 2163 x 1863 mm - Machine weight: 6450 kg Breuning bar loader: - Max. bar diameter: 5 - 100 mm - Max. bar length: 250 - 1250 mm - Table surface: 650/900 x 1250 mm - Guide channels: 10 / 20 mm - Motor power: 2.0 kW

Condition: good (used), Year of construction: 2000, Machine come without tool holders and any additional equipement. Parts shown by hand not come. Technical details are shown on picture. Blodpsw Tc S Uefx Aafsc

Condition: excellent (used), Year of construction: 2019, CNC Lathe 2-Axis Doosan Puma GT2600 Year of manufacture: 2019 Control: Fanuc i Series with Manual Guide Max. turning diameter: 460 mm Max. turning length: 658 mm Spindle speed (belt drive): 3,500 rpm Spindle bore: 81 mm Bedpfsycgpcex Aafelc SMW Autoblok chuck 250 mm Axis travel: - Z axis: 680 mm - X axis: 265 mm 12-position tool turret Tailstock Renishaw tool probe - chip conveyor with tank and pump - documentation - tool holders Operating hours: 2,700 hours Very good condition

Condition: excellent (used), Year of construction: 2014, DOOSAN PUMA 2600LMB (2014) CNC LATHE WITH LIVE TOOLS AND “C” AXIS Z-1,350 CNC FANUC i Series 10.4” Color LCD EZ-Guide - Swing over bed: 780 mm - Swing over carriage: 630 mm - Max. turning diameter: 376 mm - Max. turning length: 1,245 mm - Travel: X 260 mm Z 1,350 mm - Chuck diameter: 380 mm - Bar capacity: 102 mm - Spindle nose: ASA-A2-11 - Headstock: 2,800 rpm, 22 kW - Driven turret: 12 stations BMT 65P* (Indexing 1 station 0.25 sec) - Live tools: 5.5 kW, 5,000 rpm - C axis indexing: 0.001 mm - Tailstock quill diameter/travel: 100 mm/100 mm EQUIPMENT INCLUDED: - Samchully HCH-15” 3-jaw hydraulic chuck, 380 mm diameter - C-axis 360° (0.001°) - Automatic tool presetter - Integrated tailstock - High-pressure pump - Chip conveyor - Preparation, base, and logic for steady rest - SMW AUTOBLOK SLU-3.1 hydraulic steady rest (20-165 mm) - Set of tool holders - Set of DOOSAN and FANUC manuals CONDITION: Blsdpfx Ajyb Sryoafec Machine in good condition. Can be seen in operation. Immediate delivery.

Condition: used, Year of construction: 2008, max. wheel diameter 300 mm max. module 8 min. module 0,7 Control SINUMERIK 840 D min/max. pitch cone angle - 90 / + 90 ° workpiece spindle - bore 127 mm grinding wheel diameter 50 - 230 mm Bedpevxww Ssfx Aafjlc spindle speeds (infinitely variable) 7.500 U/min total power requirement 146 kW work piece spindle speed 700 U/min weight of the machine ca. 21 t dimensions of the machine ca. 9,5 x 3,6 x 3,1 m Measuring probefor tooth gap(integrated on the grinding head) External grinding spindle cooling system ELBARON oil mist extraction (integrated in the machine) Hoffmann coolant filter system Was used for the serial production of spiral-toothed ring gears No clamping devices No grinding wheels / grinding wheel flanges No dressing wheels

Condition: used, 10" TAILSTOCK; TOOL SETTER; CHIP CONVEYOR Bjdjya U E Tepfx Aafslc

Condition: good (used), Year of construction: 2011, functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 780 mm, turning diameter: 376 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 4,000 rpm, Equipment: rotational speed infinitely variable, 6-axis CNC lathe with sub-spindle, driven tools and Y axis Bodotvl U Hjpfx Aafslc

Condition: like new (used), Year of construction: 2021, operating hours: 1,200 h, X 800 mm H 460 mm Z 510 mm Control FANUC Chip Conveyor Bledpfxev Th E As Aafec Including 4-axis Rotary table.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 7,599 h, functionality: fully functional, machine/vehicle number: MM0018-000095, turning length: 1,540 mm, turning diameter: 760 mm, spindle bore: 86 mm, travel distance X-axis: 630 mm, travel distance Y-axis: 1,585 mm, TECHNICAL DETAILS Turning diameter: 760 mm Turning length: 1,540 mm Travel X-axis: 630 x 220 mm Travel Z-axis: 1,585 x 1,515 mm Travel Y-axis: 230 mm Chuck diameter: 254 mm Bar capacity: 76 mm Spindle bore: 86 mm Swing over bed: 1,000 mm Spindle speed: 4,000 rpm Spindle nose: A2-8 Milling spindle speed range: 10,000 rpm Tool changer: 80 positions Turret: 12 positions Tool holder: BMT 65 P, Capto milling head Drive power: 26/22 kW MACHINE DETAILS Total connected load: 100 kVA Bsdpfx Aaox Updnofelc Dimensions & Weight Footprint: approx. 6.1 x 2.7 x 3.0 m Machine weight: approx. 15.5 t Operating hours Spindle hours: 7,599 h Run time: 47,684 h Power-on time (control): 85,381 h EQUIPMENT Sub spindle 80-position tool magazine Hydraulically actuated hollow clamping device 12-position lower turret with BMT 65 P Chuck air blow-off system spindle 1 and spindle 2 Automatic central lubrication Contour milling with B-axis incl. 4-axis simultaneous machining Internal coolant supply on sub spindle Automatic tool measuring arm Electronic tool breakage monitoring 2-pressure clamping for main and sub spindle Automatic shutdown after end of production Hinged belt chip conveyor 2 x power chucks 250 mm 1 x radial AGW 1 x axial AGW Measuring probe Extended high-pressure coolant system with paper belt filtration Note: For transportation, two Mega Liner semi-trailers with 3 m loading height will be required.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 15,000 h, Main Drive Spindle speed range 12000 Tool taper Capto C6 Number of axis 5 Movement Bedpfsx E Eamex Aafslc Y-Axis Movement 230 mm A-Axis Movement 1550 mm Workpiece Workpiece drm over bed 1000 mm This 5-axis DOOSAN Puma MX2600ST turn-mill centre was manufactured in 2013. It features a maximum turning diameter of Ø 760 mm, part length up to 1540 mm, and bar capacity of Ø 76 mm. Equipped with a Fanuc 31i-A control, dual spindles with speeds up to 4000 rpm, and a milling spindle at 12,000 rpm. Includes a tool magazine with 80 positions and a swarf conveyor. Consider the opportunity to buy this DOOSAN Puma MX2600ST turn-mill centre. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2005, CITIZEN K12 CNC lathe TECHNICAL DATA Max. machining diameter: 12 mm Max. machining length: 200 mm Max. extension length: 80 mm Max. front drilling diameter: 10 mm Max. front thread diameter: M8 Spindle diameter: 16 mm Spindle speed: 15000 rpm Max. machining diameter of the counter spindle: 12 mm Max. machining length of the counter spindle: 40 mm Max. drilling diameter for rear machining: 6 mm Max. thread diameter for rear machining: M5 Spindle speed, counter spindle: 10000 rpm Tool attachment, number of tools: 8 Speed of the driven tools: 6000 rpm X1 axis: 122 mm Z1 axis: 200 mm Z2 axis: 150 mm Weight: 1950 kg SCOPE OF OFFER Among other things: (list not exhaustive) Citizen K12 CNC lathe Chip tray Transformer Bjdpfx Aasvrz H Rjfelc Complete operating documentation Exact scope of offer according to photo gallery We assume no liability for the accuracy, completeness and timeliness of the information

Year of construction: 2014, condition: ready for operation (used), General Data Bsdpjx D E Rasfx Aafelc Machine weight 15500 kg Main Drive Number of axis 7 Spindle Speed 4000 RPM Spindle motor power 22 kW Control Unit Brand FANUC Model Series 31i-MODEL B5 Movement X-Axis Movement 630 mm Z-Axis Movement 1585 mm Y-Axis Movement 115 mm This 7-axis DOOSAN Puma MX2600ST was manufactured in 2014, featuring a robust horizontal turning machine design. It includes a B-axis of +/-120 degrees, extensive X, Y, Z travels, and a bar capacity of 76mm. The machine is equipped with a FANUC 31i-Model B5 control, a 40 station tool changer, and a 22kW spindle motor. If you are looking to get high-quality turning capabilities consider the DOOSAN Puma MX2600ST machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2011, operating hours: 5,477 h, condition: ready for operation (used), General Data Measurements width 1863 Measurements depth 4600 Measurements height 1863 Machine weight 6000 Control Unit Brand FANUC Model I series Main Drive Spindle speed range 3500 Number of axis 3 Media Chip conveyor Yes Additional Equipment Tool holders 2+2 driven tools Automatic tool measurement Oil catcher Oil mist filter (Losma) This 3-axis DOOSAN Puma 2600M was manufactured in 2011. A robust horizontal turning machine featuring a Fanuc I Series control system, it offers a maximum turning diameter of 376 mm and a length of 760 mm. Spindle speed reaches up to 3,500 rpm. Includes chip conveyor, tool holders, and driven tools. If you are looking to get high-quality turning capabilities consider the DOOSAN Puma 2600M machine we have for tact us for more information. Bjdpfx Aajx D N Najfelc Application Types Turning

Condition: used, Wire erosion FANUC ROBOCUT ALPHA-0iE Bljdsxqrqaspfx Aafec

Condition: excellent (used), Year of construction: 2014, 1000mm Swing, 760mm max. machining diameter, 1540mm max turning length, 4000rpm main spindle, 76mm bar capacity, 12000rpm milling 18.5kW, C axis 0.001 degrees, Y axis -/+115mm, Blodpow Azz Ujfx Aafec 40 station ATC, 22kW spindle motors, FANUC 31i control, 3 Jaw Power Chuck, Swarf Conveyor, Coolant