WHEELED EXCAVATOR

DOOSAN

Condition: used, Year of construction: 2012, operating hours: 6,104 h, 2012 | Doosan DL420 | Used Wheel Loader | 6104 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 53900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 54 inspection points 44 approved ✅ 10 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Very clean hydraulics 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39625 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed Pjdpfoyfxw Djx Aalepl ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2018, operating hours: 5,156 h, 2018 | Doosan DX235LCR-5 | Used Tracked Excavator | 5156 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 115500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 64 inspection points 58 approved ✅ 3 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Crawler excavator Doosan DX235LCR-5 from 2018. short tail version. the boom measures 5.80m (basic boom 3.10m, adjustable part 2.90m) and the stick 2.40m. floor plate width 600mm. the condition of the machine corresponds to the value of the operating hours. the machine shows wear on pins and bushings corresponding to the age and mileage as well as the purpose of use, as well as signs of use (dents, abrasions, etc.). at the time of the inspection, the machine ran/functioned without any abnormalities. maintained machine. the sprocket/turas should be replaced. the customer has decided to keep the backhoe bucket after the inspection. the illustrated backhoe bucket is therefore NOT included in the sale! 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33296 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Ppodpeyfxv Tjfx Aalel 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, turning length: 510 mm, turning diameter: 300 mm, spindle bore: 65 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, Doosan LYNX 2100LYA – CNC Turning Center – 2020– Excellent Condition, Ready to Work! Psdpfx Aasyftfieljpl We offer for sale the Doosan LYNX 2100LYA CNC turning center, a high-performance machine for precise machining of rotational parts such as shafts, cones, spheres, and internal/external threads. The machine is in excellent technical condition, available immediately and ready for inspection. Key Features: High precision and reliability for both series and single-part production Large turret with 24 tools (including driven tools) Control system: Siemens Sinumerik 828D Powerful spindle and driven tools for high productivity Spindle bore 61 mm allows machining of various workpieces Technical Data: Max. turning length: 510 mm Max. turning diameter: 300 mm Clearance over bed: 600 mm Clearance over carriage: 400 mm Spindle bore: 61 mm Max. bar diameter: 51 mm Max. spindle speed: 6000 rpm Number of turret tools: 24 (driven tools included) Control system: SIEMENS Sinmerik 828D Year of manufacture: 2020 Dimensions (L x W x H): 2805 x 1582 x 1693 mm Weight: 2750 kg The machine is ready for immediate operation, connected to power, and available for inspection.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, turning length: 510 mm, turning diameter: 300 mm, spindle bore: 61 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, Doosan LYNX 2100LMA – CNC Turning Center – 2019 – Excellent Condition, Ready to Work! We offer for sale the Doosan LYNX 2100LM CNC turning center, a high-performance machine for precise machining of rotational parts such as shafts, cones, spheres, and internal/external threads. The machine is in excellent technical condition, available immediately and ready for inspection. Key Features: High precision and reliability for both series and single-part production Large turret with 24 tools (including driven tools) Control system: SIEMENS Sinmerik 828D Powerful spindle and driven tools for high productivity Spindle bore 61 mm allows machining of various workpieces Technical Data: Max. turning length: 510 mm Max. turning diameter: 300 mm Clearance over bed: 600 mm Clearance over carriage: 400 mm Spindle bore: 61 mm Max. bar diameter: 51 mm Max. spindle speed: 6000 rpm Number of turret tools: 24 (driven tools included) Control system: SIEMENS Sinmerik 828D Year of manufacture: 2019 Dimensions (L x W x H): 2805 x 1582 x 1693 mm Weight: 2750 kg Podeyftatopfx Aalopl The machine is ready for immediate operation, connected to power, and available for inspection.

Condition: used, Year of construction: 2013, 370mm max. machining diameter, 651mm swing over bed, 461mm swing over cross-slide, 712mm max turned length, 3500rpm spindle, 76mm bar capacity, 12 station turret, Ppsdpfxoyffz Nj Aalel 15kW spindle motor, FANUC Oi control, collet chuck , C axis & Milling, Tool presetter, Tailstock, coolant, swarf conveyor, parts catcher.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,117 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 1300 mm Y-AXIS TRAVEL: 670 mm Ppsdpfx Aajw Dkflelel Z-AXIS TRAVEL: 625 mm DISTANCE SPINDLE NOSE-TABLE: 150-775 mm RAPID FEEDS X-Y-Z: 36 - 36 - 30 m/min SPINDLE: 12000 rpm; 11-18,5 kW; 117,8 Nm; ISO 40 - DIN TABLE SIZE: 1500 x 670 mm MAX ADMITTED LOAD: 1300 Kg TOOL MAGAZINE: BASKET-TYPE ; 30 POS MAX TOOL DIAMETER: 76 (125) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC i Series Plus WEIGHT: 8500 Kg OVERALL DIMENSIONS: 2600 x 3350 x 3120 mm ACCESSORIES: SWARF CONVEYOR ; HIGH PRESSURE COOLANT ; PCMCIA SERIAL PORT ; USB PORT ; PORTABLE HANDWHEEL NOTE: 4TH-AXIS PRE-SET

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 4,790 h, load capacity: 2,500 kg, lifting height: 6,100 mm, fuel type: diesel, mast type: triplex, construction height: 2,630 mm, power: 44 kW (59.82 HP), drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Ready for operation and fully functional Ppsdeydgw Aepfx Aalol Technical condition: Good Front tires type: Solid rubber Front tires condition: 60 - 80% Rear tires type: Solid rubber Rear tires condition: 60 - 80% Description: Diesel forklift DOOSAN D25G -- 2.5 ton lifting capacity -- year of manufacture 2017 -- side shift -- TRIPLEX free lift mast -- overall height 2.63 m -- lifting height 6.10 m -- 4,790 operating hours according to counter -- forklift with 4-cylinder YANMAR diesel engine, 59 HP -- mechanical hydraulic levers -- solid rubber tires approx. 70% -- work lights -- simple, mechanical forklift with very good visibility through mast -- good condition -- the front loader can be inspected on site -- affordable delivery options! Features: Side shift, 3rd valve, rear work light, front work light, roof cover.

Condition: used, Year of construction: 2011, - Doosan-Fanuc CNC control - Breuning-Irco ILS RBK 10012 bar feeder - Samchully MH-212 315 mm 3-jaw chuck - Samchully MH-206 175 mm 3-jaw chuck - Year of manufacture 2011 Technical specifications Capacity: - Swing over bed: 780 mm - Swing over carriage: 630 mm - Recommended turning diameter: 255 mm - Maximum turning diameter: 376 mm - Maximum turning length: 760 mm - Bar loading capacity: 76 mm Spindle: - Spindle speed (belt type): 3500 rpm - Spindle nose: ASA A2#8 - Spindle bearing diameter: 140 mm - Spindle bore Ø: 86 mm - Min. spindle indexing angle (C-axis): 0.001 ° - Counter spindle speed (integrated): 6000 rpm - Counter spindle nose: ASA A2-5 - Counter spindle bearing diameter (front): 90 mm - Counter spindle through hole diameter: 62 mm - Min. counter spindle indexing angle (C-axis): 0.001 ° Tool turret: - Number of tool stations: 12 - Tool outer diameter: 25 mm - Boring bar diameter: 50 mm - Indexing time (1st swivel time): 0.15 s - Spindle speed of the driven tools: 5000 rpm Feed rates: - X-axis: 260 (72+188) mm - Z-axis: 830 mm - Y-axis: 102 (± 51) mm - Rapid traverse X-axis: 30 m/min - Rapid traverse Z-axis: 30 m/min - Rapid traverse Y-axis: 10 m/min Motors: - Main spindle motor: 22 kW - Subspindle motor: 7.5 kW - Spindle for driven tools: 5.5 kW - Feed motors (X/Z/Y axes): 3.0 / 4.0 / 3.0 kW - Coolant pump: 0.4 kW Electrical connection: - Power supply: 54.55 kVA Ppodpfx Aouxua Ioaljl Dimensions: - Machine dimensions WxHxD: 3600 x 2163 x 1863 mm - Machine weight: 6450 kg Breuning bar loader: - Max. bar diameter: 5 - 100 mm - Max. bar length: 250 - 1250 mm - Table surface: 650/900 x 1250 mm - Guide channels: 10 / 20 mm - Motor power: 2.0 kW

Condition: ready for operation (used), Year of construction: 2015, spindle speed (max.): 3,500 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 830 mm, total height: 2,200 mm, overall weight: 6,450 kg, controller manufacturer: FANUC, controller model: na, number of axes: 5, This 5-axis DOOSAN 2600 SY turn-mill centre was manufactured in 2015. It features a Fanuc CNC, a maximum turning diameter of 375 mm, and lengths up to 760 mm. The machine includes a motorized turret with 24 positions and motorized tools capable of 5,000 rpm. Ideal for complex machining tasks. Consider the opportunity to buy this DOOSAN 2600 SY turn-mill centre. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Total installed power: 54 kw • Workpiece max turning diameter: 375 mm • Workpiece max turning length: 760 mm • Workpiece max turning diameter from bar: 81 mm Podpsyc Iiwofx Aalopl • Power of motorized tools: 5. 5 kw • Speed of motorized tools: 5000 rpm Extra Information Tools 1 self-centering chuck, diameter 250 mm 2 axial live tool holders 2 radial live tool holders 5 boring bar holders 5 external turning tool holders Dimensions Machine Depth 3600 mm

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 125 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,400 mm, fuel type: gas, mast type: triplex, construction height: 2,145 mm, power: 47 kW (63.90 HP), empty load weight: 4,850 kg, drive type: Treibgas, LPG forklift Load center: 500 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Torque converter Speed class: 20 Condition: Like new Technical condition: New Front tire type: Superelastic Front tire condition: 80 - 100% Ppjdpfx Aex Aw S Toalol Rear tire type: Superelastic Rear tire condition: 60 - 80% Sideshift, 3rd valve, 4th valve, Half-cab,