CNC Lathe

DOOSAN LYNX 220

Condition: used, Year of construction: 2011, turning diameter 250 mm turning length 510 mm control Fanuc i Series greates pass round over bed 510 mm swing diameter over slide rest 290 mm x-axis 175 mm z-axis 550 mm spindle tunring speed 6.000 U/min number of tool places 12 Pos. auto power on hours ca. 11.197 h spindle hours ca. 5.359 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Driven tools - Short bar feeder - Chip conveyor - Collets - 3-jaw chuck, hydraulic Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Iodpeylcquefx Abuear Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: excellent (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, 5-axis CNC machine (VMC) DECKEL MAHO - DMU80P MACH-ID 9194 Make: DECKEL MAHO Type: DMU80P Iasdew Rdl Djpfx Abujr Control: HeidenHain TNC430 Year: 2000

Condition: used, Year of construction: 2006, turning diameter 320 mm turning length 322 mm control Fanuc D -iT greates pass round over bed 510 mm x-axis 175 mm z-axis 330 mm spindle tunring speed 6.000 U/min spindle drive 15 kW number of tool places 12 Pos. auto power on hours ca. 43.947 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor Isdsya Ih Ispfx Abujar - Manual tailstock - Tool setter arm - Parts catcher with collection box Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), Year of construction: 2011, 320mm max cutting diameter, 510mm swing, 305mm max turned length, 51mm bar capacity, 11kW motor, Fanuc Oi-Series Control, 3 Jaw Chuck, Tool setter, Parts Catcher, 12 Station turret, spindle speed 5000rpm, swarf conveyor, multifeed barfeed. Iajdpfx Asyvhv Ejbujr

Condition: excellent (used), feed length X-axis: 450 mm, feed length Y-axis: 300 mm, feed length Z-axis: 300 mm, CNC TOS INTOS ZEBRAK FNG30 milling machine TNC310 Heidenhain control X450mm Isdperq D Uksfx Abuear Y300mm Z300mm tool clamping hydraulic inverter on spindle SK40 machine in very good condition

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 290 mm, turning length: 305 mm, turning diameter: 320 mm, spindle bore: 51 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 175 mm, travel distance Z-axis: 330 mm, spindle motor power: 1,500 W, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,650 mm, total length: 2,500 mm, total width: 1,600 mm, feed length Z-axis: 330 mm, swing diameter over cross slide: 290 mm, turning diameter over bed slide: 510 mm, overall weight: 3,000 kg, bar passage: 51 mm, chuck outer diameter: 210 mm, spindle nose: A2-6, bar diameter (max.): 51 mm, CNC Lathe – Doosan Lynx 220B | Ready for Production | Immediate Availability For sale: Doosan Lynx 220B CNC turning center in good working condition, available immediately. This is a compact and highly reliable CNC lathe, ideal for precision turning, small to medium batch production, and general machining applications. Known for its stability and efficiency, the Lynx 220B is a solid choice for workshops looking for a dependable production machine. Key Specifications: * Turning diameter: 320 mm * Turning length: 305 mm * Swing over bed: 510 mm * Swing over cross slide: 290 mm * Spindle bore: 51 mm Isdpfx Ajyxtiisbujar * Spindle speed: up to 6000 rpm * Spindle motor power: 15 kW * X-axis travel: 175 mm * Z-axis travel: 330 mm * Turret: 12 stations * Chuck size: 210 mm (8") * Spindle nose: A2-6 Machine Condition & Details: * Machine is operational and ready for production * Well-suited for daily workshop use * Inspection under power possible * Immediate delivery available * Location: Netherlands Reason for sale: Change of business focus Price: €23,500 (negotiable) Serious inquiries only. For more information, additional pictures, or to arrange a viewing:

Condition: used, Year of construction: 2009, operating hours: 42,497 h, functionality: fully functional, machine/vehicle number: L2203458, turning diameter: 510 mm, spindle motor power: 11,000 W, spindle speed (max.): 6,000 rpm, travel distance X-axis: 175 mm, travel distance Z-axis: 330 mm, bar diameter (max.): 32 mm, overall weight: 3,500 kg, Machine type: CNC lathe Manufacturer: Doosan Model: Lynx 220A Year of manufacture: 02/2009 Operating hours: 42,497h (power-on hours, as of 17.12.2025) Max. turning diameter: 510 mm X-axis travel: 175 mm Z-axis travel: 330 mm Spindle speed: 6,000 rpm Iajdpfxsyxn D Ij Abusr Spindle power: 11 kW Tool changer: 12 positions Bar feeder: Ø8-32 mm Weight: 3,500 kg Transport, collection, and dismantling must be organized by the buyer.

Condition: good (used), Year of construction: 2008, Table size 1600 x 750 mm, table load 1500 kgs, Traverses XYZ 1525 x 762 x 625 mm, rapid feedrates 24m/min, Spindle power 18.5 Kw, spindle speed 6,000rpm, 40 station ATC, spindle taper BT50, through spindle coolant, swarf conveyor, Fanuc 21i control. Ijdpfjxwytcsx Abusar

Year of construction: 2014, operating hours: 25,000 h, condition: ready for operation (used), General Data Machine weight 3900 kg Control Unit Iasdpfjx D I T Rex Abuor Brand FANUC Model 0i-TD Main Drive Number of axis 4 This 4-axis DOOSAN LYNX220LSYA horizontal turning machine was manufactured in 2014. It offers robust performance for precision turning operations. If you are looking to get high quality turning capabilities consider the DOOSAN LYNX220LSYA machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2011, TECHNICAL DETAILS Control: CNC Fanuc I Series Swing diameter over bed: 250 mm Max. machining diameter: 250 mm Max. turning length: 510 mm Spindle Iajdpfx Aeyvgztsbusr Spindle bore: 53 mm Spindle speed: up to 6,000 rpm Drive power: 12 kW Axes X-axis travel: 175 mm (160 mm + 15 mm) Z-axis travel: 550 mm C-axis Tool Carrier Turret: 12-position BMT 45 Driven tools: All 12 stations 2 x Radial driven tool holders 2 x Axial driven tool holders Chip conveyor MACHINE DETAILS Machine weight: 4 t LNS loader not included in the offer Machine was used primarily for plastics Cutting hours approx. 4,000 hrs.

Year of construction: 2000, condition: ready for operation (used), Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6000rpm, spindle power: 8.5kW, tool holder: SK40, tool positions: 22, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control: Heidenhain TNC 426. An on-site inspection is possible. Iodpev Uqb Nsfx Abuoar

Condition: good (used), Year of construction: 2015, operating hours: 35,800 h, functionality: fully functional, Doosan Lynx 220LSY – Sub-spindle CNC lathe SPECIFICATION Control: Fanuc 0iTD Main spindle max. speed: 6,000 rpm Main motor power: 15 / 11 kW Driven tool power: 3.7 kW Number of tool stations: 12 (24 positions) 3-jaw hydraulic chuck: 170 / 135 mm Swing diameter (bed/turret): 600 / 400 mm Max workpiece: Ø 300 x 510 mm Max bar diameter: 51 mm Rapid traverse (X/Y/Z): 36 m/min Y-axis travel: ±52.5 mm Turret indexing time: 0.11 sec Iajdpfx Abjya Hqbouer Travel ranges: - X: 205 mm - Z: 560 mm Equipment: High-pressure coolant, 0.7 MPa Transformer Chip conveyor Tool setter Collet chuck (with 3 collets) Bar feeder for rods up to 1.5 m Workpiece ejector Workpiece catcher and outfeed system Tool load monitoring

Condition: good (used), Year of construction: 2016, 300mm turning diameter, 510mm turning length, Y axis +/- 52.5mm, 600mm swing, 65mm bar capacity, spindle speed 4,500rpm , 16 station turret, Iajdpsx Elr Aefx Abuer 15kW spindle motor, milling 6000rpm, C axis 0.001 degrees, sub-spindle speed 6,000rpm, Y axis +/- 52.5mm, Doosan FANUC-i control, tailstock, coolant, tool setter, parts catcher, 3 jaw chuck,low volt light

Year of construction: 1976, condition: good (used), strip width: 300 - 1.350 mm strip thickness: 0,35 - 3 mm coil weight: 12,5 t mandrel Ø: 508 mm Iedpsbh Ubwjfx Abujar

Condition: good (used), Year of construction: 2007, functionality: fully functional, spindle speed (max.): 4,000 rpm, travel distance Z-axis: 500 mm, throat depth: 300 mm, Model Year: 2007 Chuck Diameter: 8" Number of Axes: 2 Length: 500 Swing Over Bed: 300 mm Ijdpsx Npbiefx Abuear Spindle Speed (Rpm): 4000 Machinable Material Types: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK