DMG MORI DMU 40 eVo

DMG MORI DMU 40 eVo

Condition: used, Year of construction: 2014, x-travel 400 mm y-travel 400 mm Podpfoycxihjx Ah Hjpl z-travel 375 mm total power requirement --- kW weight of the machine ca. 7,6 t dimensions of the machine ca. --- m

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you the following: Technical Data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis: 600 mm - Y-axis: 500 mm - Z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC Rotary Table: - Clamping surface: 600 x 500 mm - Load capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and Accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary/swivel table incl. table cooling - BLUM NT laser tool measurement - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Preparation for 3D quickSET - Hinged belt chip conveyor - ICS, 40 bar, 600 l tank, incl. rotating viewing window, sealing air, linear measurement systems, bed flushing - Rinsing pistol - Mechanical oil and emulsion mist separator - Air blast through spindle center - Mode of operation 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of the zero-point clamping system - Activation/deactivation of handling system via switch on machine operator panel - Additional rinsing in the machining area included - Preparation for job management included - Operator panel arrangement on the left included - Power supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - Extension of rotary union to 4 channels included On-time hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the pictures is not included in the scope of delivery. The machine is expected to be available from October/November 2025. Podjxgnz Tjpfx Ah Hjpl The ball screw drives and linear guides in the X and Z axes have been replaced. Accessories, depicted tools, and clamping equipment are only included if specifically mentioned in the additional information. Subject to changes and errors in the technical specifications and information. Prior sale reserved!

Condition: ready for operation (used), Year of construction: 2012, Axes: 5, travel X/Y/Z: 400mm/400mm/375mm, spindle speed: 18000rpm, power: 35kW, tool holder: HSK-A63, tool positions: 60, rapid traverse: 30m/min, table dimensions X/Y: 480mm/480mm, max. workpiece weight: 250kg, machine weight: approx. 8150kg, operating hours: approx. 50950h, spindle hours: approx. 20200h. The lifting and swivel unit of the pallet changer are defective. Documentation available. An on-site inspection is possible. Pjdowwvw Hspfx Ah Hjpl

Condition: good (used), Year of construction: 2004, operating hours: 109,078 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine HOURS: 109,078 h Spindle HOURS: 22,117 h - Spindle HSK-A63 10,000 rpm - 32 tool pockets - Rotary table SRT 280 mm with integrated clamping system SK50 (if not required, this can be closed or alternatively converted for use as a zero-point clamping system) - External coolant supply Ppodpfxsxcp Slo Ah Hsl - Internal coolant supply with paper band filter, 80 bar - Swarf flushing pistol - Chip conveyor - Handheld control unit - Automatic cabin door - 32 tool pockets plus 87 additional ZM87 positions - Thermal compensation - BLUM tool measurement on carriage - Renishaw probe - Chip container - Status indicator light The machine has been thoroughly inspected, and there is a geometry inspection protocol as well as circularity test measurements available. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: new, BRAND NEW MACHINING CENTER HEIDENHAIN TNC 7 digital path control with 19" screen HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis: 650 mm Y-axis: 700 mm Z-axis: 645 mm Table size (diameter): 410 mm Maximum workpiece diameter: 500 mm Maximum spindle speed: 12,000 rpm (oil-cooled with MQL) Spindle taper: SK 40-BIG PLUS (BVD 40) Maximum spindle motor power: 17 kW ICS – internal coolant supply – 20 bar Ppjdpfxshy Arto Ah Hjl Rapid traverse X, Y & Z: 30,000 mm/min Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm ATC tool changer with double gripper: 30 positions (optional up to 80 tools) Hinged belt chip conveyor Full enclosure Only inquiries from Germany will be answered.

Condition: used, functionality: fully functional, power: 27 kW (36.71 HP), total length: 1,680 mm, total width: 1,250 mm, total height: 1,390 mm, Year of construction: 2013, operating hours: 577 h, input frequency: 50 Hz, shaft diameter: 105 mm, feed length X-axis: 265 mm, type of input current: three-phase, Equipment: emergency stop, rotational speed infinitely variable, The PBT25 with automatic radius measurement—the absolute all-rounder in our product range. This powerful and precise bending machine impresses with maximum flexibility and ergonomics. The infinitely adjustable front roller spacing from 200 mm allows for the smallest radii with perfect transitions. Thanks to the PC300 software, re-bending becomes effortless. Three powerful, low-noise electric motors drive the rollers at up to 22 rpm, ensuring the highest precision. Standard roller supports on all three shafts provide optimal stability. For more information, visit the official PBT AG website. Ppjdpfewm N Epjx Ah Hjl

Condition: good (used), Year of construction: 2001, Manufacturer: BEHRINGER Type: HBP 530 A Year of construction: 2001 Specifications: Metric Metric US Standard Capacity 90° 530 x 530 ° Min, saw length 40 mm Max. Saw length 17 - 110 Saw power 12 kW Ppjdeu U Narjpfx Ah Hjl Chip conveyor Yes Dimensions (estimate) length 4000 mm width 2250 mm height 3270 mm weight 4400 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Year of construction: 2010, condition: ready for operation (used), A twin-spindle turning and milling center Mazak is available. Travel X/Y/Z: 580mm/160mm/1545mm, B-axis: 225°, C-axis: 360°, center distance: 1500mm, max. turning diameter: 660mm, swing diameter over bed: 660mm, speed main spindle/counter spindle: 5000rpm, tool stations: 40+9, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5200mm/2550mm/2600mm, weight: approx. 14000kg, spindle hours: 24679h. Including high-pressure coolant, SMW steady rest, SMW chuck, steady rest integration, Renishaw probe, measuring probe, CAD/CAM software Topsolid 7.18, oil skimmer, postprocessor and Inspection-Plus package. The machine was mainly used for finishing. Documentation available. An on-site inspection is possible. Podpfx Asx Ih Dgeh Hspl

Condition: new, Year of construction: 2026, The EVP-RA 550 vibratory finishing machine from ERBA features a flat working container bottom with integrated separation, designed for processing medium to large workpieces. It is equipped with an easily replaceable screening unit. Emptying and separation are carried out through the integrated flap, which can be operated either manually or pneumatically. Upon request, reinforced suspension and a more powerful motor can be fitted to handle higher loads. The motor speed can be infinitely adjusted using a frequency converter (optional). With its side discharge system, the EVP-A 550 can be linked with other machines for integrated workflows. The system can also be equipped with a fully automated PLC control (optional). ERBA vibratory finishing systems are known for their durability and longevity, which is also attributable to the hot-cast polyurethane lining of the working container. Technical specifications: - Gross volume: 550 liters - Working channel width: 390 mm - Unbalance motor power: 4.0 kW - Speed: 1,400 rpm - Container inside diameter: 1,400 mm All prices are net plus the currently valid statutory VAT and shipping costs. The images may show the machine including optional accessories that are available at additional cost. If you are interested, please feel free to contact us. We are happy to offer professional, non-binding advice. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer is intended solely as an online presentation of our goods. Contract negotiations are conducted via telecommunication (email, telephone, messaging portal). In the first step, we will make you a non-binding offer, which will also include information about our general terms and conditions, company details, and your right of withdrawal, before any purchase or contract is concluded. Pedpfx Ajn Ut Ugeh Hspl

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle power : 17.5 [kW] - Spindle speeds : 18.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 915 / 500 / 500 [mm] - Rapid traverses rates (X/Y/Z) : 30 / 30 / 20 [m/min] TOOL CHANGER - Tool magazine capacity : 28 TABLE - Table dimensions : Ø 630 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3620 x 3160 [mm] - Machine height : 3000 [mm] - Machine weight : 7300 [kg] MACHINE HOURS - Number of working hours : 50223 [h] EQUIPMENT - CNC : Heidenhain iTNC 530 - Coolant tank - Chips conveyor - Oil mist extractor : ELBARON Ppedpsup Hwxofx Ah Hjl - Cooling unit : HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe : Renishaw - Tool breakage detection : BLUM