Cnc turning and milling center

DMG GILDEMEISTER CTX420 Linear V4

Condition: used, Year of construction: 1966, Max. pulling force: 5 t, max. stroke: 850 mm, max. cutting speed: 12 m/min, max. return speed: 25 m/min, clamping area: 410 x 575 mm, groove width: 3 - 90 mm, drilling diameter: 13 - 500 mm, workpiece weight: 6000 kg, depth of the machine base below floor level: 1,400 mm. Hedpfx Amocm Elnjyer

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Hsdpfjfz U S Eox Amyor Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: like new (used), Year of construction: 2013, measuring range X-axis: 1,600 mm, measuring range Y-axis: 4,200 mm, measuring range Z-axis: 1,500 mm, workpiece weight (max.): 5,000 kg, Equipment: type plate available, CARL ZEISS CNC coordinate measuring machine ACCURA II MASS 16/42/15 Year of manufacture: 2013, Overhauled: 2025 Measuring range: X = 1600 mm, Y = 4200 mm, Z = 1500 mm Control system: C99 SR VII Control panel: BP26_SE Sensor: VAST XT GOLD and RDS-CAA with VAST XXT Probe changing magazine: Multi Sensor Rack MSR Automatic temperature compensation Accuracy: VAST XT GOLD / RDS-CAA XXT MPE-E 3.6+L/300 4.9+L/200 R0 2.4 5.5 MPE-P 3.6 4.9 MPE-THP 3.7/68sec 4.7/68sec RONt 3.5 5.5 HP Z4 WIN11 workstation with 27" monitor Calypso Basic, current version Any further option possible Accessories: Calibration sphere Exchangeable probe tips XT and XXT Exchangeable magazine slots Probe accessories Documentation Further accessories Hsdpsydnzcjfx Amyor

Condition: new, Please read the technical specifications in full. If you are considering this machine as an investment, we kindly request your complete credentials, including a correct telephone number and email address, in order to submit an offer. Fiber Laser 30W Marking area: 200 x 200 mm Maximum workpiece size (WxHxD): 550 x 450 x 350 mm Laser type: Fiber 30 Watt Wavelength: 1064 nm Maximum marking speed: 7000 mm/sec Z-axis motorized H: 700 mm Repeatability/lens: +/- 0.001 mm Minimum line thickness: approx. 0.01 mm Power supply: 240 V / 50 Hz External dimensions: 110 x 80 x 200 cm Front door: manual Including software and PC Can be demonstrated under power on-site Hedpfjru E Svsx Amysr Price net, plus VAT

Condition: like new (used), Year of construction: 2017, functionality: fully functional, operating hours: 11,700 h, power: 8.9 kW (12.10 HP), travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 27,000 rpm, The machine is used for fine machining of small pieces. (Al, steel) Hodpfxoq N Ayfe Amyjr

Condition: good (used), Year of construction: 2003, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, total height: 2,800 mm, total length: 3,200 mm, total width: 2,900 mm, table width: 800 mm, table length: 1,500 mm, table load: 550 kg, rotary table diameter: 800 mm, spindle motor power: 20,000 W, Chip conveyor 3D measuring probe Paper filtration IKZ 15 Bar Under power X - Travel: 1060mm Y - Travel: 710mm Z - Travel: 710mm A - Axis: 360000° B - Axis: - 30 to + 120° Table Length: 1500mm Table Width: 800mm Table load: 550 Table Ø: 800mm Feed rate X-Axis: 15000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 15000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 20kW Speeds / ranges: 12000Rpm ATC / revolver: 32 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Hjdpfx Ajym Sdyomysr Coolantsystem: Yes Length: 3200mm Width: 2900mm Height: 2800mm Weight: 9500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2017, operating hours: 33,500 h, functionality: fully functional, machine/vehicle number: W6212-T63-280, We have a CNC lathe for sale, brand Okuma-Genos, which is ready for operation. The machine is fully functional and has been regularly maintained and serviced. - Y-axis - Main and sub spindle - Tool probe - Parts catcher Hsdpsw Np Uhofx Amysr Spindle speed: 3800 rpm Spindle operating hours: 20,503 h A detailed description of the machine is included in the attachment. Technical condition: Good. The machine has been in our facility since new, purchased in 2017 and commissioned in the first quarter of 2018. The lathe is connected to power and currently in operation. Viewing and functional inspection possible under power in our workshop. Reason for sale: ongoing changes in our projects. Optionally, an LNS bar feeder may be purchased for €7,000 and an oil mist separator for €1,500 (both visible in the pictures).

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-8 - Spindle speeds : 3000 [rpm] - Max. bar diameter : 80 [mm] - Max. turning diameter : 300 [mm] - Max. diameter on bench : 520 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle speeds : 6000 [rpm] - Max. bar diameter : 53 [mm] - C axis indexing precision : 0.001 [°] - Travel : 520 [mm] TURRET - Number of positions : 12 - X/Z stroke : 230 / 460 [mm] - Live tools speed : 4500 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 22.5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3050 x 1860 [mm] - Machine height : 1.850 [mm] - Machine weight : 5500 [kg] EQUIPMENT Hsdpfjuhbnnsx Amyor - CNC : OSP-P300L-R - Coolant tank * with high-pressure pump - Chips conveyor - Parts catcher - Parts conveying strip - Bar loader : Top Automation FU352 - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: used, Year of construction: 2004, Mazak Multiplex 6300 Mazatrol 640T Hjdpfxjv Tvkao Amysr YOM: 2004-11 approximately 20 pcs tools Mazak Flex-GL200F More information is coming soon.

Year of construction: 1982, condition: used, In Good Condition Hedpfsdq Ug Iex Amyjr