DIGMA CENTER EXERON HSC 300

DIGMA EXERON DIGMA EXERON HSC 300

Condition: excellent (used), Year of construction: 2007, Manufacturer: DECKEL MAHO Model: DMU 50 Year of manufacture: 2007 Machine type: Vertical machining center Application area: Milling Location: Germany Condition: As is, where is Control system: Heidenhain ITNC 530 Number of axes: 5 Travel of X-axis: 500 mm Travel of Y-axis: 450 mm Travel of Z-axis: 400 mm Main spindle speed: 10,000 rpm Spindle speed range: 20 – 10,000 rpm (variable) Tool changer: Chain magazine with double gripper Tool magazine capacity: 30 tool positions Max. tool diameter: 80 – 130 mm (depending on speed) Max. tool length: 290 mm Max. tool weight: 6 kg Table type: Digital swivel-rotary table Table dimensions: Ø 630 mm x 500 mm Max. table load: 200 kg Swivel range of the table: -5° to +110° (total 115°) Drive power: 9 kW (100 %) / 13 kW (40 % duty cycle) Torque: 82 Nm (40 % duty cycle) Measuring system: Direct linear measuring system Input resolution: 0.01 mm Nedoz An S Repfx Ag Islh Positioning tolerance: 0.010 mm Rapid traverse: 24 m/min Feed rate: 20 m/min Coolant tank capacity: 80 l Electrical connection / Power consumption: 17 kVA Maximum current: 28 A Fuse / Network protection: 35 A Voltage: 400 V / 230 V / 24 V Frequency: 50 Hz Installation dimensions (L x W x H): 4,860 mm x 4,350 mm x 2,424 mm Transport dimensions (L x W x H): 2,210 mm x 2,120 mm x 2,150 mm Transport weight: 4,050 kg Manufacturer: DECKEL MAHO — Model: DMU 50 (2007). Machine type: Vertical machining center for milling applications. Condition: As is, where is. Control system: Heidenhain ITNC 530. Number of axes: 5. Axis travels and table: X = 500 mm, Y = 450 mm, Z = 400 mm. The machine is equipped with a digital swivel table (Ø630 mm x 500 mm) with a maximum table load of 200 kg and a swivel range of -5° to +110° (total 115°). Spindle and tools: Main spindle speed up to 10,000 rpm with a variable speed range of 20–10,000 rpm. Tool changer: Chain magazine with double gripper; tool magazine capacity 30 positions. Max. tool diameter depending on speed (80–130 mm), max. tool length 290 mm, max. tool weight 6 kg. Drive and accuracy: Drive power 9 kW (100%) and 13 kW (40% duty cycle), torque 82 Nm (40% duty cycle). Measuring system: direct linear measuring system. Input resolution 0.01 mm and positioning tolerance 0.010 mm. Feed and auxiliary systems: Rapid traverse 24 m/min and feed rate 20 m/min. Coolant tank capacity 80 L. Electrical and transport: Electrical connection / power consumption 17 kVA; Maximum current 28 A; Fuse/protection 35 A; Voltages 400 V / 230 V / 24 V at 50 Hz. Installation dimensions: 4,860 mm x 4,350 mm x 2,424 mm. Transport dimensions: 2,210 mm x 2,120 mm x 2,150 mm. Transport weight: 4,050 kg.

Condition: reconditioned (used), CNC vertical machining center "DECKEL MAHO DMC 635 eco" With path control Siemens 810 Powerline Year of construction: 2010 Travels: X 635 Y 510 Z 460 Speed range: 20 - 8,000 rpm infinitely variable With the following accessories: Rigid angled table 790 mm x 560 mm clamping surface Vertical tool changer with 20 magazine positions Electronic handwheel Heidenhain TT 140 tool length measuring system Njdouqmvkopfx Ag Ielh Fully protected cabin with sliding doors and interior lighting Coolant device Signal light 4 colors Chip conveyor Chip flushing gun 3 pcs. Height-adjustable machine shoes Operating instructions

Condition: good (used), Year of construction: 2004, HSK 63 18.000 rpm Nedpfjznmifox Ag Ielh Parts shown by hand not come.

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, CNC Vertical Machining Center DECKEL MAHO DMU 50 eVolution With Heidenhain iTNC 530 path control Year of manufacture: 2004 Travel ranges: X 500, Y 420, Z 380 Spindle speed range: 0 – 18,000 rpm, stepless (SK 40) With the following accessories: 2-axis NC rotary table 500mm x 380mm Vertical tool changer with 32 magazine slots Nlodpez Ia I Sjfx Ag Ieh Full enclosure with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 3D measuring probe Coolant system 4 adjustable machine feet Operating manuals

Condition: like new (used), Year of construction: 2015, nominal power: 1,300 kW (1,767.51 HP), rotational speed (min.): 1,493 rpm, rotational speed (max.): 1,493 rpm, input voltage: 6,000 V, input frequency: 50 Hz, overall weight: 6,100 kg, 1 asynchronous electric motor Manufacturer: Reform Elektromotorenbau GmbH Type: Y2-500-4 Nledpfov I Alyex Ag Ieh Power: 1300 kW Speed: 1493 rpm Voltage: 6000 volts Current: 151.4 A cos Φ: 0.86 Insulation class: F Frequency: 50 Hz Protection class: IP55 Design: Foot (B3) Operating mode: S1 continuous operation Weight: 6100 kg Year of manufacture: 12/2015 Bearings: NU228C3 / 6030C3 and NU228C3 Cooling: Air Shaft height: 500 mm

Year of construction: 2011, condition: new, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 9,000 mm/min, Electric cable hoist i=28 New in original packaging as a parts carrier or for installation, see pictures Nlsdpjvylhbofx Ag Ish GDR3 H12 Motor ZBR100 B4 B050

Condition: ready for operation (used), Year of construction: 2000, operating hours: 85,542 h, travel distance X-axis: 600 mm, controller manufacturer: HEIDENHAIN, overall weight: 6,500 kg, spindle speed (max.): 16,000 rpm, number of axes: 5, This 5-axis HERMLE C 600 U was manufactured in 2000. It has a net weight of 6500 kg and includes a Knoll unit with internal cooling. If you are looking to get high-quality machining capabilities, consider the HERMLE C 600 U vertical machining centre we have for sale. Contact us for further details. - Spindle Operating Hours: 31,764 h- Internal Coolant Supply (IKZ) Pressure: 20 bar- Tool Taper: SK40- Operating Voltage: 400 V / 3-phase- Frequency: 50 Hz- Control Voltage: 24 V- Nominal Current: 63 A- Total Connected Load: 42 kVA- The folding roof needs replacement. Additional Equipment included: Knoll internal cooling system, approx. 200–300 pieces of various shrink-fit chucks (long & short), mandrels, collets, drill chucks Technical Specification Taper Size SK 40 Nsdpfezyr Rljx Ag Ijlh

Condition: good (used), Year of construction: 2014, Traverses; 800 x 460 x 520mm, Table size 1000 x 460mm, Table load 600 kgs, Spindle speed 8,000 rpm, Spindle power 11/15Kw, spindle taper BT40, 24 station ATC , Fanuc I series, coolant, swarf conveyor. Nodpfeu Ehi Aex Ag Islh

Condition: used, Year of construction: 2012, controller manufacturer: Fanuc, controller model: MXP-200FP - ManualGuide, _____ Description: Year of manuf. : 2012 Control : Fanuc MXP-200FP - ManualGuide Speed : 6000 rpm Movement X/Y/Z : 2100/1020/762 mm Tool holder : SK 50 In General: Year of manufacture:2012 Control system:Fanuc MXP-200FP ManualGuide Traverse paths X/Y/Z:2,100/1020/762 mm Spindle speed:6,000 rpm Tool holder:SK 50 Clamping surface:2,300 x 1020 mm Spindle: Technology:Geared spindle Speed:6,000 rpm Max. power:approx. 22 kW Max. torque:approx. 550 Nm Tool holder:SK 50 Work table: Clamping surface:2,300 x 1020 mm Max. table load:3,000 kg T-slots:6x 22 mm, spacing 150 mm Tool magazin: Technology:Chain magazine Tool changer:Double gripper Number of stations:40 pieces Tool diameter max.:120/240 mm Tool length max.:350 mm Equipment: Chip disposal: Chip conveyor Coolant supply:IKZ pump with filter Emulsion mist extraction:Mechanical Nedpfx Ajzf T I Nog Ijlh Set-up mode:Electronic handwheel Accessories:2x magnetic clamping plate 800 x 400 mm Tool holders:Various SK 50 holders

Condition: ready for operation (used), Year of construction: 2003, A Deckel Maho 5-axis CNC universal machining center is offered, including an Interlit compact filtration system for the coolant supply. 1) Deckel Maho DMU 70 eV 5-axis CNC universal machining center, year of manufacture: 2003, X/Y/Z travels: 750mm/600mm/520mm, B-axis: approx. 180°, C-axis: 360°, rapid traverse X/Y/Z: 50m/min, feed rate: approx. 20m/min, max. spindle speed: approx. 18000rpm, spindle power: approx. 25kW, max. rated power: approx. 35kW, spindle torque: approx. 87Nm, tool holder: SK40, table dimensions X/Y: approx. 700mm/500mm, max. table load: approx. 200kg, tool magazine: 32, weight: approx. 8500kg. 2) Interlit SUK 200-900 compact filtration system, year of manufacture: 2003, filter area: 0.2m², filling volume: 900l. Inspection by prior arrangement is possible. Nlsdpfszrn Iqsx Ag Ish