FGT Graphic Machinery - LABELPRESS

MPS EB 370-8

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Fpjdpfxsyx Uy As Akyjn Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: ready for operation (used), A Honsel bag making machine (packaging machine) is available. Working width: 500mm, wrapping closure: one-sided. Including cardboard flange feeder. The machine is partially dismantled. Toothed belts must be tensioned and partially replaced. Toothed belt wheels are disassembled and must be installed. On-site inspection is possible. Fpsdpjvtqrljfx Akyon

Year of construction: 1993, condition: good (used), ROTOFLEX VLI 330 INSPECTION – SLITTER – REWINDER Machine information: Rotoflex products are proven in practical applications with self-adhesive labels, processing, blister foils, and all kinds of paper. This professional and heavy duty die-cutter with slitter/rewinder and label checking will rewind rolls in a perfect register with a max. diameter of 700 mms and a max. width of 330 mms into smaller sized rolls. During the process the labels can be checked for quality and missing labels. Specifications:  Max. web width: 330 mms  Roll diameter: unwind: 700 mms / rewind: 400 mms  Shaft diameter: unwind: 76 mms / rewind: 76 mms  Max. speed: 230 m/min. Fpsdpfxovwkhnj Akyon  Slitters  Rewinders  Splice table

Condition: good (used), Year of construction: 1996, GALLUS Arsoma EM 280-8 Colour Flexo Printing Press Model: EM280 Year of manufacture: 1996 Configuration: • 8 flexo printing units • 8 hot air dryers • GEW UV curing system (1x) Fpodey A Nhiopfx Akyen • Turn bar (web turning device) • Sheet delivery (stream delivery) • BST Powerscope 4000 web inspection system Technical Data (approx.): • Max. web width: 280 mm • Print width: approx. 260–270 mm • Repeat length: approx. 250 – 520 mm • Unwinder: max. roll diameter approx. 800–1000 mm • Rewinder: max. roll diameter approx. 800–1000 mm • Mechanical speed: up to approx. 120 m/min • Substrate range: self-adhesive labels, paper, film and flexible packaging materials The machine offers a robust and proven solution for label production, providing high flexibility due to the combination of conventional drying and UV curing systems. This enables the processing of a wide range of materials and applications. A key advantage of this press is the included tooling package, which significantly reduces the need for additional investment and allows for immediate production start-up. Scope of delivery includes: • Printing cylinders • Anilox rollers • Magnetic cylinders This added value ensures high versatility and cost-efficiency for future production needs.

Condition: like new (used), Year of construction: 2011, OMET Varyflex VF1 Year of manufacture: 2011 Web width: 850 mm Printing process: Flexo + Rotogravure combination line Condition: Used – very good condition Location: Europe _____ Machine Configuration • 8 x UV flexo printing units (equipped with new UV lamps, LED-ready) • All flexo units in ATEX execution (suitable for solvent-based inks) • 1 x rotogravure unit (compatible with solvent- and water-based inks) • 1 x die-cutting unit (530 mm) • In-line slitting system • Double turret rewinder • Turn bar (web turning system) • Hot air dryer on first printing unit • Cold seal trolley (movable) • Cold foil unit (cassette type, positionable on any unit) Fedpsyyn Hfofx Akyspn _____ Equipment & Tooling • Extensive anilox roller package • Sleeve system (well maintained) • Tooling in very good condition Optional (available upon request): • Omet plate mounter • Bimec slitter rewinder 1200 mm (almost new condition) _____ Technical Highlights & Advantages The OMET Varyflex VF1 is a highly versatile production platform designed for both label and flexible packaging applications. Key advantages: • Wide web format (850 mm) – ideal for high-volume production • Hybrid configuration (flexo + rotogravure) for maximum flexibility • ATEX design allows use of solvent-based inks • LED-ready UV system for future energy efficiency upgrades • Modular configuration with movable units (cold foil/cold seal) • Excellent condition with recently updated electronics (PLC, drives, control cabinets) • Proven application: previously used for polyethylene-coated materials (80–90 g/m²), ensuring reliability in demanding environments This machine offers an outstanding balance between performance and flexibility.

Condition: used, Year of construction: 1995, Colors: 8 Gearless: No Fast Sleeve Change: No 4 motor CNC per printing deck: Yes Computer Supervision: Yes Web Width: 1320 mm Print Width: 1300 mm Min. Print Repeat: 380 mm Max. Print Repeat: 1100 mm Mechanical Speed: 350 m/min Working Speed: Up to 300 m/min Unwinding & Winding: Turret, FLYING SPLICE, Max. Reel Diameter 1000 mm Drying: 2 Zones, 4 Fans, 2 Gas Burners Video Camera: Yes Corona Treatment: No Web Guides: FIFE Viscosity Control: Yes Wash System: Yes, F&K Ceramic Anilox Rollers + Closed Chamber Doctor Blade 1x 80 L/cm, 2x 200 L/cm, 2x 120 L/cm, 4x 200 L/cm, 2x 320 L/cm, 3x 400 L/cm 200 sleeves, repeat between 390 mm and 1090 mm (8 for each repeat: 390, 400, 410, 420, 430, 450, 480, 510, 530, 540, 550, 630, 660, 670, 740, 780, 800, 850, 880, 930, 990, 1030, 1050, 1090 mm + 8 twinlock 740 mm + 8 twinlock 1030 mm) Mandrels for sleeves: 6x360 mm, 6x400 mm, 6x420 mm, 8x460 mm, 8x530 mm, 6x560 mm, 12x620 mm, 8x780 mm, 8x850 mm, 15x990 mm Fpodpfx Akexzrx Eeyen Printing cylinders: 8x380 mm, 8x390 mm, 12x400 mm, 8x410 mm, 8x450 mm, 6x460 mm, 7x470 mm, 4x490 mm, 12x500 mm, 8x510 mm, 12x530 mm, 8x540 twinlock, 6x560 mm, 8x570 mm, 8x580 mm, 8x590 mm, 12x620 mm, 9x640 mm, 12x660 mm, 6x670 mm, 6x730 mm Overall Dimensions: Length = 17 m, Width = 5 m, Height = 6 m Central Drum Diameter: 2280 mm

Year of construction: 2001, condition: good (used), Dear Ladies and Gentleman, we are proud to offer you following machine. You also receive the pictures of the machine so that you can see the very good condition of the machine. Fsdpfxjwmf A Ds Akyepn The offer is on condition of subject to prior sale: ROTOFLEX VLI 510 – Slitter Rewinder General information: • Brand: Rotoflex • Model: VLI 510 • Year of Manufacture: 2003 • Condition: Good working condition • Availability: Immediately Technical Specifications: • Web Width: 510mm • Functions: o Slitting o Rewinding • Rewind Diameter: Up to 700mm • Unwind Diameter: Up to 750mm • Core Sizes: 3" • Slitting System: Razor blade • Minimum Slit Width: 12mm • Web Path: Roll to roll • Counting Options: Label and length counting • Drive System: Servo driven • Web Guiding System: Included Application: Ideal for slitting and rewinding of self-adhesive labels, films, foils, and other flexible materials. • Condition: Regularly serviced and well-maintained _____ Technical and Optical Condition: • Technical: 8/10 (checked and in excellent running condition) • Optical: 8/10 (cleaned and ready for immediate end-user deployment)

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Full line screen printing machine Trumax Feeder Sakurai SC 102 DX - 1995 - stop cylinder model Trumax 2 Lamps UV dryer with hot air module Trumax Hyperstack Max speed 5500 per hour ! Full documentation Fsdpeymv Dkjfx Akyepn Max size of sheet1050 x 750 мм. Min size of sheet Около 420 x 297 мм. Printing size1020 x 700 мм. Thickness 0.1 to 0.8 мм.

Condition: refurbished (used), Year of construction: 2006, 3/4-automatic screen printing machine THIEME 3010 special model Printing format 55 x 75 cm, screen frame format 100 x 110 cm, parallel lifting machine with extendable vacuum table plate, special version with gripper system, rear delivery, suitable for channel with long infeed or for cross-positioning at a drying channel. The rear part of the gripper extends the machine by 170 cm at the back. Electromechanical machine with pneumatic squeegee pressure control, separate control panel, can be operated from the left or right side, complete with 3 sets of printing and flood squeegees, used, model year 2006, fully refurbished and repainted, in good technical and visual condition. Fpjdsr Izhuopfx Akyjn

Condition: excellent (used), Complete line direct from Bankrupt company which was filling capsules and tablets into small tubs. Bottlea are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1 Fjdpfxsw Hz T Ee Akyopn