Diesel 250-2050bar 21-167l/min.

DEN-JET CD100

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Drive power: 3 kW Delivery pressure: 7 bar Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Nedpfx Aoh A Sfdohvjku Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Technical data was taken from publicly available sources

Condition: as good as new (ex-display), functionality: fully functional, type of cooling: water, FRONIUS TPS 5000 ✅ Scope of delivery: ➤Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤Fronius FK 4000 ➤Fronius VR 4000 wire feeder unit Nkjdpfswbh Ifsx Ahvju ➤Fronius standard intermediate hose package from 1.5m ➤Fronius trolley ➤Fronius hose package ➤Ground cable 3-4m ➤Pressure regulator This device can weld almost all materials, including aluminum, steel, and V2A. It features touch wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options and applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. We also offer the optional RCU 5000i control panel, which allows you to create and import characteristic curves to further expand the functions of the TPS device. ---- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna, 1230! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? To explain, we buy like-new used devices, disassemble them, check everything, replace wear parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You are buying an item from us that is also worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we purchase from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately do not have the flexibility to offer a warranty. You are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Year of construction: 2025, condition: new, GeoBoost-7000 Combined bench for turbocharger geometry calibration and performance evaluation. Stand for static and dynamic calibration and testing of turbocharger. It has a combined two-position design, which allows testing the turbocharger in two modes - rapid static calibration of turbocharger geometry - Full dynamic diagnostics at different operating modes GeoBoost-7000 will allow you to carry out professional testing of turbocharger operation during repair, tuning or modernization. The availability of two working zones of the machine depending on the testing method helps to carry out comprehensive diagnostics. HIGHLIGHTS • Simulates real-world operating conditions for accurate turbocharger diagnostics and tuning. Nodpfjvtn Hmsx Ahvjku • Flexible and versatile to work with a variety of turbocharger models. • All types of turbochargers can be installed using the accessories provided. • Oil leak testing using heated oil and compressed air. • N75 turbocharger control valve testing. KEY FEATURES - Ability to adjust the extreme position of the blades of the air flow control mechanism. - Adjusting the length of the stem to adjust the actuation torque of the air flow control mechanism. - Real-world turbocharger testing; - Real-time geometry tuning; - Performance testing of actuators: vacuum, pneumatic and electric types; - Diagnosis of servo-drives of electric actuators (optional); - Post-assembly testing of the turbocharger for oil leakage; - Availability of a high capacity vacuum pump to create the required vacuum and air flow. - Testing the turbine according to the manufacturer's test plan; - Calculate turbocharger performance; - Plot supercharger inlet and turbocharger outlet boost vs. flow; - Construct the resulting graph; - Generate and print test reports. SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1700 х 900 х 1500 mm Weight 400 kg

Condition: new, Year of construction: 2026, functionality: fully functional, The Mercedes of cable peeling machines! The PR3 Evolution is produced entirely in our factory near Ulm. All purchased parts come from well-known manufacturers such as Siemens (electrical), Rittal (switch cabinet), KEB (gear motor) and Nachi (ball bearings). A machine truly MADE IN GERMANY! Robust, reliable and safe. The PR3 Evolution complies with the EC Machinery Directive 2006/42/EC Annex II A Technical data: Motor power 4kW / 380 V Cutting speed Nkjdpfougt Dxox Ahvsu 44m / min Working range 1.5 mm2 - Ø 90 mm weight approx. 700 kg Dimensions W 1000 x L 1800 x H 1520 mm Paint finish Ral 7037 / 7035 Subject to technical modifications 40 years of experience and over 500 machines sold worldwide speak for themselves.

Condition: good (used), Year of construction: 2011, machine/vehicle number: MS 1153, Offer 23158 Technical data ca : - passage to blasting chamber B 370 x 170 mm Nsdpfxsllvr Do Ahvoku - blasting nozzle - Door opening to blasting chamber - Blasting material pressure vessel - blasting material recovery - separate control panel - space requirement blast machine 1600 x 2000 x H 1750 mm - space requirement blasting material container 1200 x 1200 x H 2250 mm - Cartridge filter with suction fan MUNK - SCHMITZ - Air volume 700 - 1500 m³/h - Suction fan 3 kW - space requirement filter unit 1600 x 1600 x H 3250 mm - mot. driven inlet roller table 4 m - roller table without drive 3 m - roller width approx. 800 mm - roller table height approx. 700 mm

Year of construction: 2012, condition: used, fuel type: electric, weight max. in kg 2500 kg stroke 3700 mm fork length 900 mm Super elastic battery Baujahr 2013 construction height 2630 mm Nedpjfibh Refx Ahvjku weight of the machine ca. t Duplex / Free lift

Condition: new, MEP SHARK 230-1 NC HS 5.0 Two-column metal band saw Item number SH230-1NCHS motor power 2,2kW band opening 235 mm band dimensions 2950x27x0,9 mm weight 1.000 kg speed 15 - 100 m/min. infinitely variable cutting surface 0° 230 / 230x230 cutting surface 45° right cutting surface 45° left cutting surface 60° right cutting surface 60° left Description: SHARK 230-1 NC 5.0, electro-hydraulic twin-column fully automatic bandsaw with semi-automatic and fully automatic mode. Max. remnant length 70 mm. Bundle cuts 230 x 230 mm. Numerically controlled sawing machine with the new MEP 50- Windows based control. Material feed with stepper motor via ball screw mounted on opposing ball bearings. Single stroke 500 mm - repeatable to saw any length. Easy programming - enter cutting length and number of pieces and press "START". Electronic belt tension control. Automatic monitoring of cutting load by servo valve mounted directly on the cylinder. Nkodpfx Aschhfujhvou Rotation control of the band with immediate stop in case of a blocked saw band.

Condition: used, Year of construction: 2017, operating hours: 300 h, functionality: fully functional, total width: 2,160 mm, total length: 1,350 mm, total height: 1,700 mm, pressure: 2,500 bar, operating pressure: 2,500 bar, fuel: diesel, overall weight: 1,850 kg, rotational speed (max.): 1,800 rpm, high-pressure hose length: 20,000 mm, empty load weight: 1,850 kg, fuel tank capacity: 140 l, type of cooling: water, power: 120 kW (163.15 HP), water pressure: 2,500 bar, pump capacity: 25 l/min, Equipment: crane, type plate available, CD160-2500 with 2500 bar and 25 l/min. The pump is powered by a water-cooled 4-cylinder SISU diesel engine. The entire frame is made of hot-dip galvanized steel, ensuring long durability and corrosion resistance. The frame is equipped on all four corners with rubber feet, forklift pockets, and lifting eyes. The machine features a galvanized roof plate with a side mount for the protection and storage of, for example, high-pressure hoses. Similar to but not a Dynajet, Falch, Hammelmann, Kamat, Uraca, Woma, etc. General Specifications: Operating pressure: 2500 bar Flow rate: 25 l/min Nkjdpfx Ahoxufbtevsu Max. pump speed: 560 rpm Drive engine: 4-cylinder SISU diesel Drive engine output: 119.3 kW Drive engine speed: 1800 rpm Tank: 140 L Max. fuel consumption: 26 L/h Dimensions and unladen weight (SKID): 2160 mm x 1350 mm x 1700 mm (1850 kg) Standard accessories included.

Year of construction: 1988, condition: good (used), machine/vehicle number: 14684/1, suitable for copper cable and plastic recycling Nodpfonvdq Nox Ahvjku

Condition: used, System: used piston diaphragm pump / pump Type: HMD-G-50-500 Flow rate: 40.0 m3/h Pressure: 1,6 MPa Nkedpfxodkdi Ts Ahvou