Milling machine / DECKEL FP 3

DECKEL FP 3

Year of construction: 1980, condition: ready for operation (used), Max. rotational speed: 2500/min, feed rate: 5-500mm/min. Dodpfx Asfdzzysc Njun

Condition: used, Year of construction: 2009, pressure 40 t Duedjvzxpnepfx Ac Non stroke 4 - 100 mm no. of strokes 130 /min throat 230 mm dayligth 475 mm table surface area 650 x 460 mm hole in the table 205 x 165 mm table height over floor 710 - 950 mm table adjustable 240 mm ram surface 435 x 240 mm ram adjustment 85 mm power requirement 5,0 kW Weight 2,6 t dimensions of the machine ca. 1,2 x 1,7 x 2,3 m x m x m permitted for manual loading according to the CE-norm with motor, pneumatic hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, motoric centralized lubrication, adjustable table, two-hand and foot operation

Year of construction: 1990, condition: ready for operation (used), Control: Deckel Dialog 11, with vice, an inspection is possible. Duodpfx Aoqi D S Uoc Nen

Year of construction: 1987, condition: ready for operation (used), A CNC universal milling machine Deckel is available. Travel X/Y/Z: 400mm/400mm/400mm, table dimensions X/Y: 700mm/460mm, max. table load: 350kg, tool holder: SK40, quill stroke: 80mm, speed: 4000rpm, feed rate: 3600mm/min, rapid traverse: 4m/min. Machine dimensions X/Y/Z: approx. 1800mm/1800mm/2200mm, weight: approx. 2500kg, control: Contour 3. The tool change magazine is no longer in operation. Documentation available. An on-site inspection is possible. Dujdpfxeya Hw Us Ac Njn

Condition: reconditioned (used), Year of construction: 1990, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Aktiv Dodsx S Edljpfx Ac Neun Year of manufacture: 1990 – workshop-inspected Machine no.: 2102-5866 Milling head type: 2171 Milling head no.: 4613 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X, Y, and Z axes - Universal table 590 x 250 mm (T-slot: 12 mm) - Vertical milling head SK 40 with pull stud thread S 20 x 2 - Without coolant system; can be retrofitted if required - Centralized lubrication, electric - Operating manual Used as seen, sold without warranty The machine is technically in the condition of its year of manufacture.

Condition: used, Technical details: Dodpfx Acjyhwh To Nsun Type: Deckel FP3 / 4A-TC with Contour 3 Year of manufacture: 1987 In 2025, a new power supply unit and a new ballast circuit were installed The tool changer magazine is no longer in operation.

Condition: not inspected (used), Year of construction: 1980, feed length X-axis: 500 mm, feed length Y-axis: 300 mm, feed length Z-axis: 400 mm, table width: 370 mm, table length: 650 mm, Heidenhain 3-axis digital readout Universal table 650x370 mm Spindle 40, max spindle speed 2500 rpm Dedpfx Ajyhdgcoc Noun Travel 500x300x400 mm Weight 1500 kg

Condition: used, Year of construction: 2021, cutting range for steel to 50 mm capacity at 100% 130 A weight of the machine ca. 130 kg dimensions of the machine ca. 650 x 400 x 900 mm ORIGINAL PRICE: ~6,000 EURO Very good condition Very little use Features: - Burner A151/6 - Ground cable 25 mm² Adjustment range, continuously variable [A] 25 - 150 Duedpfxsv Da Ude Ac Nen Duty cycle at Imax. (10 min) at 20°C [%] 60 Mains connection [V] 3 x 400 V Fuse protection (slow-blow) [A] 35 Protection class IP 23 Cutting capacity max. [kw] 21 Current/voltage at 100% IDl [A/V] 130/130 Power consumption max. 24.5 Power factor [cos phi] 0.97 Max. cutting quality with REHM power torch 40 mm Max. cutting capacity for manual cutting with S 235/S355 [mm] 50

Condition: used, Year of manufacture: 1980s Dusdpfxsyfrf Io Ac Nen Technical data: Travel X/Y/Z: 400 / 400 / 400 mm Tool holder: SK 40 Speed range: 40 - 4000 rpm Feed, stepless adjustable: 2 - 360 mm/min Rapid traverse: 4000 mm/min Swivel table: 700 x 460 mm, max. load 350 kg Tool changer: Number of tools: 20 Max. tool diameter: 80 mm Max. tool length: 300 mm Max. tool weight: 6 kg Equipment: - Control: CNC path control Deckel Dialog 11 - Hydromechanical clamping system SK 40 with drawbar according to DIN 69872 - Vertical and horizontal working spindle - Milling head manually swivels +/- 90° - Geometrically stepped direct drive for maximum torque - Milling performance at the working spindle

Year of construction: 1990, condition: good (used), Various collets and holders Approx.300 pieces. For DECKEL milling machines FP1 -FP2-FP3-FP4 Single sale demand inquiries. Dusdpfx Acehvz Iie Nsn

Condition: good (used), Year of construction: 1997, machine/vehicle number: 71-000988, Offer 24820 Technical data: - Cutting current continuously adjustable 30 - 100 A - Duty cycle 80 A / 100% ED - 100 A / 80% ED - Max. cutting thickness - Steel approx. 32 mm - Aluminum approx. 25 mm - Stainless steel approx. 55 mm - Air connection 5 bar Dusdovqbdyopfx Ac Njn - Gas mixing system - Connection 400 V / max. 14.5 kVA - Space requirement approx. W 800 x H 1650 x D 700 mm - Weight approx. 250 kg

Condition: used, Year of construction: 1983, functionality: fully functional, We also offer this used milling machine DECKEL FP 3 AKTIV, year of manufacture 1983, currently located in Spain. Immediately available. Wiring diagram: 6004 004202 – Operating voltage: 380 V – Frequency: 50 Hz – Rated current: 21 A – The machine is equipped with an active 3-axis digital display from HEIDENHAIN. – Spindle speeds: 40–2500 rpm – Table dimensions: 800 x 420 mm – with 9 T-slots – Tool holder: SK 40 – Travel ranges X: approx. 500 mm, Y: approx. 400 mm, Z: approx. 400 mm. Dodpfxjygwqlo Ac Njun

Condition: used, Year of construction: 1987, - Lid Contour 3 CNC control - Sliding vertical milling head with extendable spindle - counter bearing for long milling arbors - Hydraulic tool clamp - Automatic speed gearbox - Automatic clamping in X/Y/Z axes - Automatic central lubrication - coolant device - direct path measurement - Collision protection clutch in Z/Y axes - year of construction 1987 Technical data Working range: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Vertical quill stroke: 80 mm - Vertical milling head can be moved on headstock: 150 mm Main drive: - Motor: pole-changing three-phase AC brake motor and manual gearbox with clockwise/anticlockwise rotation - Power: 3.7 / 4.4 kW - 18 working spindle speeds: 50 - 2500 rpm - Step change: 1.25 - Tool holder: SK40 (M16) - Tool clamp: hydraulic Feed drive: - X-axis: 1 DC motor - Y- and Z-axis: 1 DC motor - All axes: ball screws - Feed speed programmable: 10 - 1000 mm/min - Rapid traverse X-/Y-/Z-axis: 2000 mm/min Universal table: - Number of T-slots: 7 - T-slot width: 14/H7 mm - T-slot spacing: 63 mm - Center bore Ø/depth: 63H6 / 8 - Distance from table center to screw-on surface: 260 mm - Max. Passage height (vertical milling spindle/table surface): 490 mm - Permissible load: 300 kg Duedpfx Acou Awlzo Nsn - Weight: 230 kg - Rotation range in horizontal position (axis C): 360 ° - Tilt range (axis A): +450 / -150 ° - Pivoting range (axis B): ± 450 ° - Measuring range with direct digital display: Resolution 360000 x 0.001 ° - Reduction ratios: 60:1 / 120:1 / 240:1 Installation: - Space requirement with safety area: approx. 2.3 x 2.5 m - Operating voltage: 400 V / 50 Hz - Total connected load: 7.5 kW / 9.5 kVA - Machine weight: approx. 1830 kg - Floor load: 3000 kg/m²

Condition: new, Year of construction: 2024, - FAGOR 3-axis position indicator, Mod.: 400iB INNOVA - Milling head +- 90° manually swiveling - Manual tool clamping using M 16 tightening screw for vertical and horizontal spindle - Swiveling control panel - Motor for horizontal and vertical spindle - Feed motors with inverter for X/Y/Z axis - Ball screw spindles in the X/Y/Z axes - Gearbox for 18 spindle speeds - Counterholder with support bearing - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Spindle protection with safety switch - Splash protection on the 3 sides of the horizontal table - LED work light - Automatic lubrication for X/Y/Z guides - Mechanical handwheels for X/Y/Z axes - Coolant system - Cover for X/Z axes - Operating tool - Technical Documentation - CE version Colors: - RAL 7024 – graphite gray - RAL 7035 – light gray Technical data: Fixed angle table: - Dimensions of the work surface: 1,000 x 540 mm - T-slots: Number / width x distance: 8 pcs. / 14 x 63 mm - Max. table load: 300 kg Vertical table: - Dimensions of the work surface: 1,200 x 250 mm - T-slots: Number / width x distance: 8 pcs. / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 600 mm - Transverse (Y): 500 mm - Vertical (Z): 400 mm Vertical milling head: - Tool holder: ISO 40 / DIN 2080 - Speed range: 40 - 3,200 rpm. - Number of spindle speeds: 18 (40 - 65 – 83 – 100 - 130 – 160 – 200 – 250 - 400 - 330 520 – 650 – 820 – 1,020 – 1,280 – 1,600 – 2,000 – 3,200) - Quill stroke, manual: 100 mm - Head swivel: +- 90° - Distance spindle nose/table: 70 - 470 mm - Distance spindle center to column - min./max.: 160 / 660 mm Horizontal spindle: - Tool holder: ISO 40 / DIN 2080 - Gear stages: 18 - Speed range: 40 - 3,200 rpm. - Distance from spindle center / to 2nd T-slot: 95 - 495 mm - Distance from spindle center / to 3rd T-slot: 180 - 580 mm Feeds: Duedovunrfopfx Ac Njn - Control: stepless - Range (X,Y,Z): 0 - 600 mm/min. - Rapid traverse (X,Y,Z axes): 600 mm/min. Motors: - Main drive power: 3.75 kW - Feed motor power (X-Y-Z): 0.35 kW - Coolant pump: 0.09 kW Dimensions and weight - Dimensions (W x D x H): 1,881 x 1,813 x 1,916 mm - Weight: 1,600 kg

Condition: good (used), Internal Item No.: 25110 Universal Milling Machine Deckel FP3 Machine No.: 2482 + 3-axis digital readout + Safety guard with switch (UVV) + Machine lamp Duedsyb Su Uepfx Ac Non + Various SK40 tool holders and collet set (S20x2) Milling table: 800 x 420 mm Spindle taper: SK40 Max. speed: 2000 rpm Drive power: 3 kW Travel X/Y/Z: 500/300/400 mm Dimensions (LxWxH): 1400 x 1500 x 1800 mm Weight: approx. 1500 kg The machine is fully functional and can be demonstrated under power by arrangement in a heated storage area of over 500 m².