Tool Room Milling Machine - Universal

DECKEL FP 1

Condition: used, Year of construction: 1980, x-travel 300 mm Lrsdow A Apyepfx Aagsh y-travel 160 mm z-travel 340 mm tool taper SK40 Speed 40-2000 U/min. control Aktiv HEIDENHAIN table-size 600 x 210 mm total power requirement 2 kW weight of the machine ca. 0,73 t dimensions of the machine ca. TBH 1200x1100x1600 m - Active feed in the X and Z axes - Additional swiveling table 600 x 210 mm - Coolant system - Counter bearing for horizontal milling - Several fixtures and clamping devices/milling cutters - Operating instructions

Condition: used, Year of construction: 2004, Technical details: x-travel: 750 mm y-travel: 600 mm z-travel: 520 mm table surface area: D 700 x 500 mm turning speeds: 42.000 1/min tool taper: HSK E50 control: HEIDENHAIN iTNC 530 tool change unit: 60 pos. rapid traverse: 50 m/min table load capacity - central/maximum: 350 kg total power requirement: 50 kVA weight of the machine ca.: 9 t dimensions of the machine ca.: 3,2 x 2,65 x 2,8 m Lsdpfx Aaswzx Nmogorh 5-axis simultaneously HSC-machining center, NC-round-swivelling table B-axis 180°, C-axis 360°, chip conveyor, el. handwheel, laser, prepared for 3D touchprobe HEIDENHAIN TS 641 (without touchprobe), mode 4, oilmist suction, spindle chiller, no internal coolant supply, approx. 141.300 hours "machine on", approx. 64.500 hours "spindle on" in total machine in good condition (test report available) *

Condition: used, Year of construction: 1980, x-travel 300 mm y-travel 160 mm z-travel 340 mm tool taper SK40 Speed 40-2000 U/min. control Aktiv HEIDENHAIN table-size 600 x 210 mm total power requirement 2 kW weight of the machine ca. 0,73 t dimensions of the machine ca. TBH 1200x1100x1600 m - Active feed in the X and Z axes Lodjw A Ap Hjpfx Aagsrh - Additional swiveling table 600 x 210 mm - Coolant system - Counter bearing for horizontal milling - Several fixtures and clamping devices/milling cutters - Operating instructions

Condition: used, Universal tool milling machine DECKEL type FP 1 Machine no.: 52185 Year of manufacture: 1968 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size: 600 x 250 mm Spindle taper: SK 40 - S20 x 2 Spindle speed: 40-2000 rpm, 16 steps Motor power: 1.0 and 1.4 kW, pole-switchable Mains connection: 380 Volt, 50 Hz - Feed on X and Z axes - Two motor speeds and 8 gearbox speeds - Quill stroke on vertical milling head: 60 mm - Fixed angle table - Coolant system in the machine base - Free-standing control cabinet - Counter support with counter bearing for horizontal milling SK 40 Required space (L x W x H): 1200 x 1100 x 1600 mm Weight: approx. 1000 kg Lrjdpfjdzqb Sjx Aagoh Very good condition

Condition: reconditioned (used), Year of construction: 1984, Universal Tool Milling Machine DECKEL FP 3 With 3-axis active digital display Heidenhain TNC 11 Year of manufacture: 1984 Travel: X 500 / Y 300 / Z 400 mm Speed range: 25 – 2500 rpm Including the following accessories: - Rigid angle table, 850 mm x 400 mm clamping surface - Swiveling rotary table Ø 450 mm with dividing disks - Slotting head - Movable vertical milling head - Extendable quill for drilling - Infinitely variable feed via potentiometer - Various milling arbors SK 40 / S22 x 2 Lrodpfx Aexuh Rdoagsh - Chip tray - Automatic central lubrication pump for X, Y, Z axis - Machine lamp - Coolant system - 4 machine feet - Operating manual

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine No. 28317 Year of construction approx. 1960 travel X: 245 mm Y: 150 mm Z: 340 mm table size 600 x 210 mm spindle admission horizontal MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 0,8 and 1,1 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis Ljdjiy Ekvepfx Aagorh - Coolant device with mechanical pump in machine base - Pinol shift at vertical milling head 60 mm - vertical milling head +/- 90° tiltable - Metal base made of angle iron with machine feet space requirement L x W x H 1100 x 900 x 1650 mm weight 650 kg good condition

Condition: used, Universal tool milling machine DECKEL type FP 1 Machine No. 33064 Year of manufacture approx. 1960, overhauled in 2012 Travel X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: MK 4 - S20 x 2 Vertical spindle speed: 95–1900 rpm, 12 steps Horizontal spindle speed: 60–1200 rpm, 12 steps Motor power: 1.1 and 1.4 kW Power supply: 380 Volt, 50 Hz - Feed on X and Y axes - Quill adjustment on the vertical milling head Ljdpfodzp T Ejx Aagjrh - Fixed angle table - Coolant system with mechanical pump in the machine base - Separate control cabinet with cable connector Space requirement L x W x H: 1100 x 900 x 1600 mm Weight: approx. 900 kg Good condition Machine was overhauled in 2012

Condition: good (used), Year of construction: 2000, machine/vehicle number: 7853, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, table length: 6,000 mm, table width: 2,000 mm, table load: 17,000 kg, Travelling column milling machine | FPT Sirio-M50 - Heidenhain control system - 60-position automatic tool changer - Coolant treatment and filtration unit Lredpfx Aajxzzlhogeh - Chip conveyor - Cooling unit, manufacturer Deerosdassi (Italy) - Electrical cabinet - Full machine enclosure (protective housing) An inspection is possible at any time by appointment.

Condition: excellent (used), Deckel FP1 AKTIV (3-Axis Active) Machine no.: 2102-3240 Year of manufacture: approx. 1988 Travel paths: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40–2,000 rpm Motor power: 1.6 and 2 kW Power supply: 380 V, 50 Hz Equipment/Accessories: - Active digital readout, 3 axes, HEIDENHAIN type TNC 113 Lrsdpfsyll A Tox Aagjh - Infinitely variable feed in X, Y, and Z axes - Vertical milling head quill travel: 60 mm - Vertical milling head swivels and extends 100 mm horizontally - Coolant system (coolant tank in machine base) - Documentation - Central lubrication system - Machine vice - Various toolholders/collets/tools Space required (L x W x H): 1,350 x 1,100 x 1,700 mm Weight: 850 kg The machine has been visually reconditioned and technically inspected. Geometry inspection videos can be provided upon request. Backlash Y axis: 0.1 mm Backlash X axis: 0.2 mm Backlash Z axis: 0.15 mm Runout horizontal spindle: 0.001 mm Runout vertical spindle: 0.001 mm Parallelism deviation Y axis: 0.002 mm (measurement path: 150 mm) Parallelism deviation X axis: 0.01 mm (measurement path: 300 mm) Geometry inspection videos can be provided upon request. The following parts have been renewed: - Gears in horizontal head replaced and gear shaft newly mounted - New guide cover for Z axis + various attached parts - Machine refurbished - New LEDs installed - Y-axis chain tensioner overhauled - Reference point programming checked - Function test carried out

Condition: excellent (used), Tool milling machine DECKEL FP 1, three-axis digital readout TNC 113, from educational institution - CE marking - Travel X / Y / Z 300x160x340 mm - Heidenhain TNC 113 / plug-in control - Spindle speed range 40 - 2000 rpm - Infinitely variable feed in all three axes - Rapid traverse in all three axes - Vertical head adjustable by 100 mm - Vertical-horizontal milling facility - Tool holder ISO 40 Lredpfx Ajyln Irsagoh - Drive power 1.5 / 1.9 kW - Fixed angle table - Chip tray - Coolant system - Work light - Documentation Dimensions: LxWxH 1.3x1.2x1.7 m / Weight: 950 kg Errors and omissions excepted

Condition: good (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 3,000 mm, - CNC control Heidenhain TNC 415B - controlled 2-axes NC-milling head 2,5° - coolant device The machine will be sold without the plate field Accessories: ca. 20 pieces tool tapers DIN 2080 with bolts DIN 69872 some spare parts like bevel gears for the milling head and ball screw for X-axis. Ledpfxewrzkzs Aagjrh Technische Daten / technical details: Verfahrweg X längs / X-travel longitudinal 10000 mm Verfahrweg Y quer / Y-travel cross 1500 mm Verfahrweg Z vertikal / Z-travel vertical 3000 mm Werkzeugschaft / spindle taper SK50 Drehzahlbereich (2-stufig) / spindle speed (2-steps) 35-3000 UpM /rpm Vorschub / infeed 6-10000 mm/min Eilgang X,Y,Z / rapid feed X,Y,Z 10, 15, 10 m/min Antriebsleistung Hauptmotor 100%ED / drive capacity main motor 100%ED 37 kW Gewicht der Maschine ca. / weight 39300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: reconditioned (used), Year of construction: 1976, Universal Tool Milling Machine Manufacturer: DECKEL Model: FP 1 Lrjdsyipmwjpfx Aagsh Year of manufacture: 1976 – workshop inspected Machine No.: 51720/08 Geometric acceptance with inspection protocol Accessories: - 3-axis digital readout K+C Arbah-M, new - Fixed table 600 x 210 mm (T-slot 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant system - Operating manual Used as seen, without warranty The machine technically corresponds to the standard at the time of manufacture.

Condition: excellent (used), functionality: fully functional, spindle mount: MK 0, Accessory device for milling machine Deckel FP 1 Lrjdpoyk In Nefx Aagoh The slotting head is suitable for keyway slotting operations on the milling machine. It is suitable for planing operations in the vertical direction (Z-axis) on the milling machine. The slotting head can be swiveled 360 degrees. The stroke of the ram is adjustable from 0 mm to 80 mm. Number of strokes: 16 to 200 strokes per minute. Tool holder approx. 16 x 16 mm. Accessories: 5 slotting tools with widths of approx. 5 mm, 7 mm, 9 mm (tool shank 16 x 15 mm). The slotting head is used. This is an original Deckel accessory device. The unit was only used by us for precision work. The slotting head is in very good condition. Weight: approx. 30 kg Price: Ex works, VAT can be shown separately. Payment: Invoice with VAT indicated. Payment upon collection or in advance. Delivery: Shipping via a parcel service is possible. Self-collection is possible. Terms of delivery: We deliver according to the Machineseeker standard contract, Standard purchase contract for used machinery from Machineseeker. A standard contract can be downloaded from Machineseeker. Delivery time: Available immediately.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, turning length: 510 mm, turning diameter: 300 mm, spindle bore: 65 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, Doosan LYNX 2100LYA – CNC Turning Center – 2020– Excellent Condition, Ready to Work! We offer for sale the Doosan LYNX 2100LYA CNC turning center, a high-performance machine for precise machining of rotational parts such as shafts, cones, spheres, and internal/external threads. The machine is in excellent technical condition, available immediately and ready for inspection. Key Features: High precision and reliability for both series and single-part production Lrsdpfx Aeyftfijageh Large turret with 24 tools (including driven tools) Control system: Siemens Sinumerik 828D Powerful spindle and driven tools for high productivity Spindle bore 61 mm allows machining of various workpieces Technical Data: Max. turning length: 510 mm Max. turning diameter: 300 mm Clearance over bed: 600 mm Clearance over carriage: 400 mm Spindle bore: 61 mm Max. bar diameter: 51 mm Max. spindle speed: 6000 rpm Number of turret tools: 24 (driven tools included) Control system: SIEMENS Sinmerik 828D Year of manufacture: 2020 Dimensions (L x W x H): 2805 x 1582 x 1693 mm Weight: 3500 kg The machine is ready for immediate operation, connected to power, and available for inspection.

Condition: used, tool adaptor 88 length 560 mm center height of top slides 65 mm weight 17 kg Counter holder / horizontal milling device for tool milling machine Deckel Mod. FP 1 consisting of upper beam and mounting of the milling arbor. The distance from the middle of the milling arbor to the lower edge of the counter holder is Lrodov Dxzcspfx Aageh 65 mm, the width of the guide is 88 mm. Machine dealer with own stock of 1600 m².