CNC Universal 5-Axes Milling Machine

Deckel Maho DMU 100 monoBLOCK/DMU 60 monoBLOCK

Year of construction: 2024, condition: new, Working space 1100 x 660 x 816 mm (W x D x H) Blasting chamber Fjdpfxjh Hxubj Abgjpp Dust-tight vacuum cabin in stable sheet steel construction Working gloves special rubber, wear resistant, cotton inside, firmly connected to the cabin against dust leakage Doors Blasting chamber W x D x H = 1100 x 660 x 816 mm Two side doors, dust-tight closing, double-walled, sound-absorbing foam, lockable, with electrical shut-off safety device Blasting media recovery Via coordinated MHG recovery system Operation ON/OFF switch for suction and lighting, pressure regulator, manometer and foot switch Viewing panels

Year of construction: 1978, condition: good (used), machine/vehicle number: 6006/478, Broaching Machine - Vertical Manufacturer: Rausch Type: RS8/1300 Fpedpjfc T E Ajfx Abgep Year of manufacturing: 1978 Force: 8 Tons Stroke: 1.300 mm Weight: 0,92 Tons

Condition: excellent (used), Year of construction: 2012, Cutting range round: max. 530 mm Cutting range square: max. 530 x 520 mm Saw band dimensions: 7,000 x 54 x 1.6 mm Cutting speed: 10 - 110 m/min Fpedjwvtckspfx Abgjp Drive power: 7.5 kW Weight: approx. 4.5 tons

Condition: used, Year of construction: 2007, x-travel 730 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 / 87 Nm tool taper HSK-A63 swivellable NC: ° table surface area 1.000 x 600 mm T-slots 9x 14 x 63 mm table diameter 600 mm rotatable C: 360 ° max. table load 500 kg number of toolpositions 60 pos. tool taper HSK-A63 total power requirement 40 kVA weight of the machine ca. ca. 11,0 t dimensions of the machine ca. 4,5 x 4,5 x 3,5 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 monoBLOCK Fedpfx Aewpw E Nsbgjpp - 5 Axis - NC-Rotary-Table - Swivel-MillingHead

Condition: good (used), Year of construction: 2005, operating hours: 84,564 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 17 kVA, controller manufacturer: iTNC 530 Heidenhain, controller model: iTNC 530 Heidenhain, total height: 2,500 mm, total length: 3,000 mm, total width: 3,000 mm, table width: 500 mm, table length: 650 mm, table load: 200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 22,855 h, spindle motor power: 13,000 W, number of slots in tool magazine: 16, tool length: 300 mm, tool diameter: 130 mm, tool weight: 6 g, Equipment: rotational speed infinitely variable, The machine is in good condition. A few things have been redone and freshened up. The following has been overhauled: -Complete X-axis bearing including ball screw and bearing -Various hydraulic components -Tool changer reset and sensors replaced -New door switch installed -New discs installed (unfortunately already got some flying chips again) -New coolant pump -New screen, as it was defective -New handwheel HR410 The machine does not have many spindle hours or switch-on hours. The machine has never seen a series production and has always been operated sensibly. Warm-up programs etc. Fsdpfx Aevtnm Hebgopp We are tool and mold makers, so we tend to do more complex contours rather than heavy machining. I am only selling this because I need a simultaneous machine and also more travel paths. Technical data: Year of manufacture 2005 x-travel 500 mm y-travel 450 mm z-travel 400 mm Control iTNC 530 Heidenhain Main spindle Speed range - main spindle 20 - 10,000 rpm Drive power - main spindle 9 / 13 kW Torque 57 / 82 Nm Tool holder SK 40 Rotary table Table clamping area 630 x 500 mm Swivel range -5 / +110 ° Max. table load 200 kg T-slots 14 H7 T-slots - distance 63 mm C-axis +/- 360 ° Feeds: Rapid traverse (X / Y / Z) 12 m/min Feed rate 10,000 mm/min Tool changer: Tool positions 16 pos. Max. tool weight 6 kg Max. tool length 300 mm Max. tool diameter 80 mm Max. tool diameter with free adjacent box 130 mm Tool holder SK 40 Total power requirement 17 kVA Machine weight approx. 3.6 t Space requirement approx. 3.0 x 3.0 x 2.5 m Tool milling machine - Universal DECKEL MAHO - DMU 50 Attention: no chip conveyor and no automatic measuring probe! - 5 axes (3+2) - WITHOUT tools Attached are pictures of the machine. The machine was intentionally not cleaned before taking the pictures, so it is in the "chip" and is used daily. You can also see the hours of the machine there. Kinematics and geometry are OK. for our needs, but could possibly be re-measured. We have never had any crashes etc.

Year of construction: 2017, condition: ready for operation (used), Travel X/Y/Z: 560mm/560mm/660mm, clamping surface: 400mm/400mm, spindle mount: HSK-A63, speed: 20000rpm, power: 25kW/35kW, torque: 130Nm/86Nm. Work table indexing: 0.001°, speed: 100 rpm. Tool positions: 40 + 60, ring magazine holder: BT40/SK/CAT40/HSK-A63, max. tool diameter: 70mm, max. tool length: 450mm, max. tool weight: 12kg. Including cooling lubricant system, chip conveyor, IKZ, filter system, oil mist separator and flow monitor. Machine dimensions X/Y/Z: approx. 4000mm/3000mm/3000mm, weight: approx. 9500kg, control: CELOS with Siemens 840D sl Operate, operating hours: 41220h, spindle hours: 21663h. Documentation available. On-site inspection is possible. Fodpou Rc R Eefx Abgjpp

Condition: excellent (used), Year of construction: 2010, turning length: 800 mm, turning diameter: 430 mm, spindle motor power: 11,000 W, spindle speed (max.): 6,000 rpm, travel distance X-axis: 455 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 12,000 rpm, total height: 8,500 mm, total length: 2,500 mm, total width: 2,495 mm, CNC controller: Fanuc FS31IA5 (MAPPS 4) Capacity Turning length mm: 800 Max. turning diameter mm: ø Ø430 Turn-mill spindle X-axis travel mm: 455 Y-axis travel mm: ±105 Z-axis travel mm: 800 B-axis degree: ±120 (0.001º) Speed spindle rpm: 12.000 Drive power kW: 9/5.5 Tool magazine Magazine places: 76 Tool holder: Capto C5 Tool length max. mm: 250 Tool diameter max. mm: 70/130 Fpjdpfx Abeu Afizsgjp Tool weight max kg: 5 Lower turret X-axis travel mm: 160 Z-axis travel mm: 730 Number of tool slots St .: 10 Main spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 73 Chuck type: Hollow Chuck (8") Manufacturer: KITAGAWA Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 7.5/5.5 Chuck type: Solid Chuck (8") Manufacturer: KITAGAWA Equipment Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter spindle Coolant gun Working time hours Under power: 76.482 Spindle 1: 14.010 Spindle 2: 4.306 Rated power kVA: 48 Basic machine dimensions / weight 4.170 Length mm: 2.500 Width mm: 2.495 Height mm: 8.500

Condition: used, Year of construction: 2011, machine/vehicle number: 300195, Lg.no. 24215 Technical data: - max. working width 3040 mm - max. material thickness 4 mm Fpsdetpnldepfx Abgop - Manual cutting angle adjustment - stroke rate up to 34 1/min - backgauge with positioning control Pos100 - table height approx. 850 mm - front angle fence - 2 front support arms - Back gauge with light barrier - E- foot switch - Pneumatic connection 6 bar - Drive 400 V - Space requirement without support arms approx. W 4000 x H 1400 x D 2100 mm - Weight approx. 4700 kg

Condition: good (used), Year of construction: 1991, Capacity 4 mm, cutting length 2550 mm, mot. back gauge, frontarms with scale, cutting gap adjustment, finger stop, foot pedal, pneumatic back sheet holder Fedpfx Aoq Tqwrebgjpp

Condition: excellent (used), Year of construction: 2016, operating hours: 15,065 h, functionality: fully functional, travel distance X-axis: 735 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 40,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, workpiece weight (max.): 600 kg, table width: 650 mm, table length: 800 mm, rotary table diameter: 650 mm, overall weight: 11,900 kg, spindle speed (max.): 24,000 rpm, tool length: 315 mm, tool diameter: 160 mm, tool weight: 8,000 g, input voltage: 400 V, type of input current: three-phase, CNC Machining centre DMG MORI DMU65 monoBLOCK TECHNICAL CHARACTERISTICS: Year of manufacturing: 2016 CNC control: SIEMENS 840D SL Number of simultaneous axes: 5 Stroke X axis: 735 [mm] Stroke Y axis: 650 [mm] Stroke Z axis: 560 [mm] Working feed X axis: 40000 [mm/min] Working feed Y axis: 40000 [mm/min] Working feed Z axis: 40000 [mm/min] Traversing feeds X, Y and Z axes: 40000 [mm/min] Axes acceleration: 6 [m/s²] X axis ball screws Ø: 40 [mm] Y axis ball screws Ø: 50 [mm] Z axis ball screws Ø: 40 [mm] Table length: 800 [mm] Table width: 650 [mm] Max. load on table: 600 [Kg] Table surface Ø: 650 [mm] Spindle type: HSK-A63 Max. spindle speed: 24000 [rpm] Tool changer magazin number of stations: 60 Max. tool length: 315 [mm] Max. weight of single tool: 8 [Kg] Max. tool diameter: 160 [mm] Supply voltage: 400 [V] Number of hours under power: 41379 [h] Number of running hours: 15065 [h] Weight: 11900 [Kg] INCLUDED EQUIPMENT: Fpjdpfexnz R Rjx Abgsp x71 HSK-A63 tool holders x1 DMG MORI PowerProbe 60 optical part probe x1 BLUM laser system for tool setting and tool breakage detection x1 set of measuring glass scales on all linear axes with air supply x1 remote electronic handwheel x1 electrical cabinet air conditioning unit x1 MICRONFILTER KUBE 2500 mist extraction system x1 chip conveyor x1 spindle chiller Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, Axa, Chiron, Matec, Reiden, Lagun, Haas, Alzmetall, but also CNC milling, drilling and tapping machines, as well as CNC grinding machines.