DANOBAT HG 91-3000-B8

DANOBAT HG 91-3000-B8

Condition: good (used), Year of construction: 2013, grinding diameter 140-355 mm grinding length 3000 mm centre height 260 mm weight of the machine ca. 8,3 t dimensions of the machine ca. 8500 x 3500 mm SA 6Ux3000 external cylindrical grinding machine Year of manufacture: 1981 Retrofit: 1 x 2013 SERWEMA Ijdpfx Ajynmpyog Ieib Maximum grinding diameter with tailstock: 140 mm Maximum grinding diameter without tailstock: 355 mm Maximum grinding length: 3,000 mm Center height 260 mm Workpiece weight max. 500 kg Machine footprint 8500 x 3500 mm Machine weight 8500 kg

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, grinding length: 600 mm, grinding width: 400 mm, grinding height: 400 mm, grinding wheel diameter: 300 mm, table load: 400 kg, grinding wheel width: 50 mm, overall weight: 3,600 kg, ELB Perfekt 6, year of manufacture 2002, grinding area 600 x 400 mm, grinding wheel 300 x 50 mm, 4 kW spindle power, automatic grinding cycle, roughing, finishing, spark-out, lifting, dresser mounted on spindle head with compensation. The machine has been professionally overhauled by us and now meets the geometry of a new machine. The grinding spindle has new bearings. Accessories: electro-permanent magnetic clamping plate 600 x 400 mm, water tank with paper filter unit. All functions have been tested and the machine can be demonstrated under power at our facility. We are also happy to handle on-site installation and training, as well as future servicing. Financing/leasing is available; we will be pleased to provide an offer! Isdpoxdalfjfx Ag Ieib

Condition: good (used), Centre bore 2- 50 mm Diameter of workpiece 8 - 125 mm Iiedpfxsrivluo Ag Ijb Lenght of workpiece 50 - 1000 mm Grinding wheel speeds 13'000 - 45'000 rpm Misc.accessories MARCELS MASCHINEN AG

Condition: used, Year of construction: 2021, operating hours: 28,000 h, functionality: fully functional, workpiece weight (max.): 80 kg, grinding wheel diameter: 508 mm, workpiece weight between centers: 80,000 g, distance between centers: 800 mm, grinding wheel width: 80 mm, spindle speed (max.): 1,000 rpm, feed length X-axis: 370 mm, feed length Z-axis: 800 mm, feed rate X-axis: 15,000 m/min, feed rate Z-axis: 7,500 m/min, overall weight: 7,250 kg, input frequency: 50 Hz, input voltage: 400 V, We are offering a used STUDER favorit_1044 cylindrical grinding machine, manufactured in 2021. Type: favorit_1044 Serial No: 1044- Iijdpfx Ajylld Deg Isb Year of manufacture: 2021 Voltage: 400 V Frequency: 50 Hz Weight: 7,250 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Distance between tips : 400 [mm] - Effective diameter : 180 [mm] LINEAR AXES - X1 and X2 x Z travel : 220 [mm] - Z travel : 850 [mm] - X x Z resolution : 0.0001 [mm] TURRET : Iisdjvxw A Ujpfx Ag Ieb - Number of fixed positions : 12 - Tool holders : VDI30 WHEEL CARRIER - Right-hand external grinding : * Grinding wheel dimensions (Ø x width x bore) : 400 x 50 x 127 [mm] * Drive power : 6.8 [kW] WORKPIECE CARRIER - Max. speed : 7500 [rpm] - Speeds (synchronous operation) : 1 - 5000 [rpm] - Taper type : CM4 - Drive power : 10.5 [kW] - C axis : 0.001 [°] SYNCHRONIZED COUNTER SPINDLE - Max. speed : 7500 [rpm] - Rotational speeds (synchronous operation) : 1 - 5000 [rpm] - C axis : 0.001 [°] - Inner cone : MK4 - Micrometric adjustment : +/- 40 [microns] - Drive power : 10.5 [kW] POWER SUPPLY - Power rating : 45 [KVA] DIMENSIONS - Floor dimensions : 2800 x 3960 [mm] - Machine weight : 7600 [kg] MACHINE HOURS - Powered hours : 57000 [h] EQUIPMENT - NC FANUC 310i-modelA - Software Studer WIN - RS232 / USB interface - Remote electronic handwheel - Turret with Renishaw LP2 length self-calibration device - Marposs feelers for diameters (multirange) + Z4 axes for positioning - Semi-automatic wheel balancing MPM.3 BMT100 M.24 - 480 L coolant tank * with paper filter * with magnetic filter - Chip conveyor - Fog extraction - Cooling unit for grinding wheel motor cooling - Electronic contact detection Dittel AE6000 - Fixed dressing device on workhead - Electrical cabinet air conditioning - Balancing shaft - Interface for automatic loading system

Condition: used, Year of construction: 1983, grinding length 8400 mm grinding width 1450 mm workpiece height 1250 mm surface area 8000 x 1250 mm table height over floor 920 mm distance between columns 1470 mm workpiece weight max. 59700 kg weight of the machine ca. 59,7 t dimensions of the machine ca. 22 x 5 x 5 m Adjustment ranges: -Crossbeam, vertical 1250 mm -Grinding support, horizontal 3100 mm Adjustment speeds: -Machine table (X-axis) infinitely variable 1-45 m/min Table creep speed 5 m/min -Grinding support, horizontal (Y-axis) Rapid traverse 3000 mm/min Feed, step 0.001-0.099 mm Feed rate, continuous 100-3000 mm/min Creep speed 18+1 mm/min Tip infeed 0.001-0.019 mm Ijdpsvr Hgvefx Ag Ieib -Crossbeam (W-axis) Rapid traverse 410 mm/min Table drive: -Oil transmission, Type Iv4 -Cylinder-Ø 185 mm -Piston rod Ø 130 mm -Drive motor 22 kW

Condition: used, functionality: fully functional, machine/vehicle number: 7085, Used universal cylindrical grinding machine Manufacturer: WMW Model: SU 315 x 1000 mm Equipped with internal grinding attachment Iiodpfowl A H Dox Ag Isb Maximum workpiece diameter: 315 mm Maximum grinding length: 1000 mm Grinding spindle speed: 1340 rpm Workpiece speed: 22–500 rpm Longitudinal table travel: 5–1680 mm Table feed rate: 0.05–5 m/min Maximum workpiece weight: 300 kg Connected load: 12.5 kW Machine weight approx.: 5.8 t

Condition: good (used), Distance between centers: 1000 mm Center height: 175 mm Isdpjtrgn Tjfx Ag Isib CNC brand: FANUC CNC model: Oi-TD

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 4304, rotary table diameter: 600 mm, grinding height: 450 mm, overall weight: 14,500 kg, Machine is equipped with 3 spindles, surface grinding, external grinding, bore grinding Iedpfevt A Rtex Ag Ijib Turret head B-axis with 1° division Belt filter system included

Condition: good (used), Grindable, largest diameter: 200 mm Center distance: 450 mm Weight of the machine approx: 2, 2 t Machine dimensions: Iijdpfx Agjlz Nxwo Ijb