HORIZONTAL MILLING MACHINE COMEC FRO 500

COMEC FRO 500

Condition: used, We are offering a JUTEC 6000D tube bending machine here. Please refer to the attached offer for technical data. If you have any questions, we are happy to assist you. Ljdpfexz Rz Ejx Adwjhg

Year of construction: 2005, condition: used, Used machine Year of manufacture: 2005 Equipment and technical data: - Log house milling machine BL100A - four-head unit - For producing chalet corner joints by milling on four sides of the log plank in a single clamping, using 2 × vertical and 2 × horizontal milling spindles - Processing dimensions: 140 × 200 mm - Milling spindles: Ø 30 mm - Cutter: max. 4 × 220 × 100 mm - Motor power: 4 × 3.0 kW - Speed: 4,200 rpm - Feed: hydropneumatic, steplessly adjustable, with rapid traverse - Operation: two-hand activation / via PLC control - Milling depth adjustment: spindle, digital counter - Workpiece clamping device: 2 × vertical, pneumatic - Extraction: underfloor funnel, Ø 160 mm - Equipment: complete with electrical system, PLC control, and pneumatics - Machine base: prepared for end groove unit, drilling device, and cross-cut saw - Machine enclosure: closed design, hinged safety cover (gas spring) with viewing window - Control cabinet: on pedestal with 3.0 m cable sleeve - Delivery condition: ready for operation, without tools - Horizontal clamps in machine table: 2 units - Activation: pneumatic, front-mounted Lhodoyxyanopfx Adwog - Clamping cycle: automatic via PLC control - End groove unit integrated - Milling spindle: Ø 30 mm - Cutter: max. 180 × 40 mm - Motor power: 3.0 kW - Speed: 4,200 rpm - Feed: hydropneumatic, steplessly adjustable, with rapid traverse - Height adjustment: spindle, digital counter - Workpiece clamping device: 1 × additional vertical, pneumatic - Equipment: integrated, with electrical system and pneumatics, without cutters - Horizontal drilling device integrated, with drill guide and chip guard - Drill diameter: max. 30 mm - Motor power: 1.1 kW - Speed: 1,500 rpm - Feed: pneumatically, steplessly adjustable, with rapid traverse for idle stroke - Height adjustment: spindle, digital counter - Workpiece clamping device: 1 × additional vertical, pneumatic - Equipment: integrated, with electrical system and pneumatics, incl. Ø 20 mm drill bit - Under-table cross-cut circular saw integrated (automatic mode only) - Maximum cutting dimensions: 200 × 140 mm (W × H) - Saw blade diameter: 500 mm - Motor power: 4.0 kW - Cutting speed: 86 m/s - Feed: pneumatic - Workpiece clamping device: pneumatic - Extraction: suction funnel Ø 120 mm - Equipment: integrated, with electrical system and pneumatics, incl. saw blade - Prepared for automatic operation - Sliding table: mechanics, pneumatics, and electrics for end groove mill - Interface: electric, for actuation via external Tigerstop control - Infeed table length: 9,000 mm - Outfeed table length: 4,000 mm Availability: short notice Location: Röllbach

Condition: new, functionality: fully functional, 2-channel counting machine for small parts such as Lego. Lhjdpfx Adov Hrlgswog Applicable for counting of Legos, building blocks, food, candy, and hardware spare parts. Max. speed: 30 packs/min (1-2 pcs per pack). Suitable for items from 2.5 mm (LxWxH). Key features: infrared counting sensor, transparent material detection function. Dimensions: L640xW1120xH1880mm.

Condition: excellent (used), Year of construction: 1999, Robust Tilting Spindle Moulder T 26, tiltable from -45 to +45 degrees Spindle moulder in excellent specification. A real treat for every Martin enthusiast! Pole-changeable drive motor 5/6 kW with automatic motor brake Forward/reverse rotation Tilting angle electrically adjustable from -45° to +45° Height adjustment up to 150 mm, electrically adjustable When adjusting the height, a correction factor for the tilt angle is displayed on the upper readout, which is then set on the stop, allowing precise settings based on drawings Four spindle speeds: 3,000 / 4,500 / 6,000 and 9,000 rpm Spindle diameter 30 mm, quick-change spindle with torque wrench (Dornfix system) Comfort fence T226 with digital readouts for total adjustment and individual infeed jaw, as well as cutter diameter input—cutting depth is then calculated automatically Fence with lifting feature can be swung away (for curve milling work) Table opening via eccentric rings, electrically adjustable, three additional insert rings Table extension on right and left with extendable workpiece support Support can be extended up to 700 mm Table length approx. 2,400 mm Fold-away fence for slot mortising Aigner Centrex workpiece pressure unit Aigner integral fence: left 500 mm, right 600 mm New Steff 2048 4-roller feed unit with 8 speeds, forward/reverse rotation Lsdpfx Aoy Ig Iwsdwjhg Feed socket switchable via control panel Comfort stand with electrically height-adjustable feed support, which can be swung away for machine setup and locked back in position afterwards Zeromaster for easy spindle height setup Two extraction ports, each 120 mm Compressed air connection 6 bar Emergency stop switch Some parts of the machine have been newly painted Feed unit renewed Drive belts replaced Operating manual CE-marked Dimensions approx. 3,000 x 1,500 x 1,830 mm (LxWxH). Weight approx. 1,800 kg. The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse—see “more offers from this dealer.”

Condition: like new (used), Year of construction: 2017, 1 used bulk material counting system based on vision systems Manufacturer: DATA Detection Technologies Ltd. Model: DATA count U-162 Year of manufacture: 2017 Size Bulk material parts: 1 to 5 mm The U-162 small parts counter was specifically developed for use as a filler on automatic bagging machines and is ideal for counting repeat batches of the same product type. Embedded with ICI vision mass counting technology, the U-162B parts counter is capable of counting an unprecedented variety of small parts ranging from 1 mm to 25 mm in size, without the need for tooling changes when switching between objects. Complex-shaped items, including open-formed pieces, can be easily counted, making the U-162B small parts counting machine an ideal system for industries such as aerospace, defense, medical, electronics, hardware, and others. Its unique ability to count multiple items in parallel leads to counting speeds of up to 200 objects per second, delivering results comparable to weight-based machines while maintaining higher accuracy compared to conventional counters. The DATA U-162 small object counting machine can be integrated into a variety of automatic poly bagging machines, such as Autobag, Audion, Paxmatic, Sharp, and many others. Main features: - Vision and algorithm based - Counting accuracy: up to 99.8% - Part size range: 1 mm – 25 mm - Speed: Up to 200 objects per second - Industry 4.0 compatible - GMP-compliant design - Easy handling of challenging items - Automatic learning for all object types Lodpox A Ekkofx Adwjhg - One-time setup / no calibration required - Unlimited programs and products - Jam flap to increase counting performance - Ejector mechanism for automatic discharge of excess quantities - Touch panel, PC-based HMI with intuitive graphical user interface - Remote control for remote maintenance - Supports TCP/IP protocol

Condition: excellent (used), functionality: fully functional, Bartezaghi 2BE 250 Cross Milling Machine Spindle length: 240 mm Maximum milling height: 250 mm Spindle diameter: 40 mm Spindle speed: 5600 RPM Motor power: 9 kW Lhsdpfxjyyi E No Adwsg Pneumatic material clamping Control via control panel

Condition: used, Year of construction: 2006, Working width ca. 1.000 mm feed: pneumatisch Lhedpfx Adjx Ivk Uowjg Spindle diameter 40 mm

Condition: used, Year of construction: 2018, functionality: fully functional, The conveyor belt (3 pieces) from MTF Technik is for sale with CE marking and various functions. A video can also be provided via WhatsApp. Length: 2000 mm Width: 400 mm Height: 700 mm Height: 850 mm - 1100 mm Constant belt speed: 16 m/min Tunnels are 20 mm high and can be moved every 300 mm Lodpfxjwl Digj Adwehg