Guillotine shear ShearOne H3000-6

CoastOne ShearOne H3000-6

Condition: ready for operation (used), Year of construction: 2005, sheet width 3220 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 1.0 mm upper clamping bar adjustment 160 mm adjustment speed 100 mm/sec Adjustment folding beam 80.0 mm bending speed 120 Grad/sec back stop - adjustable ~ 10.0 - 2.000 mm adjustment speed 300 mm/sec compressed air 6.0 bar work height max. 869 mm control POS 2000 total power requirement 10.4 kW voltage 400 V weight 3750 kg range L-W-H 4565 x 2950 x 2163 mm current new price ~ €150,000 Dodsxnqwtepfx Ab Tewf from a maintenance workshop with very good equipment (!!) Features: - CNC electro-motor-driven universal folding machine * ??High-precision mechanics with modern control technology * For single and series production * Robust high-speed machine with high axis speeds * Torsion-free welded construction - Rotating upper beam / as an automatic tool change system * With 2 tool stations (sharp and goat's foot bending rails) * Reduces setup and idle times * Eliminates time-consuming tool changes and adjustments - SCHRÖDER CNC control model "POS 2000" * Touch panel at the front right (can also be operated with a PC mouse) * Color display * USB interface * Automatic cutting calculation * Material and tool library * Accurate bending simulation * Windows XP operating system - Servo-driven control Drives * for bending/upper beam and electric backgauge - CNC electric lower beam adjustment - CNC electric backgauge * Travel speed 300 mm/sec. * With rear sheet support surface (stainless steel sheets) - 1x freely movable double foot switch - Operating instructions (PDF) Special accessories included: - 1x 30° upper tool sharpening rail - 1x split set of upper tool goat's foot rails, H = 130 mm - 1x 10.0 mm bending rail - 1x 25.0 mm bending rail

Year of construction: 2021, condition: ready for operation (used), A like new plasma cutter is available. Operating hours: 30h, open circuit voltage U₀: approx. 292V, output current I: 105A at 30A 92V–105A 122V at 92 or 122V under 30A, output voltage under load nominal HYP U₂ IEC U₂: approx. 160V at 100 percent power approx. 142–160V depending on standard, duty cycle at 30°C at 80 percent power 105A at X at 40°C, at 100 percent 94A or at other voltages, supply voltage input: three phase 3-PH multiple voltages possible 380–400V etc. U1 50/60Hz, protection class IP23CS, standards EN60974-1 EN60974-10 Class A GOST etc., power consumption P1: 14.9kW/h approx. 14.9kW, duty cycle at 40°C: 80 percent at 105A at certain voltages, 100 percent at slightly lower currents for example approx. 94A at higher voltages, other combinations depending on voltage and standard. Length with handles: 592mm, width: 274mm, height: 508mm, weight with torch 7.6m cable: 45kg. Table with sheet clamp, collection container and rail guide for the plasma cutter optionally available. An on-site inspection is possible. Dwsdpfx Asxddaasb Tef

Condition: as good as new (ex-display), Year of construction: 2023, air pressure: 5.9 bar, Next-generation air plasma system that significantly simplifies system operation for cutting and gouging up to 32 mm. Features automated process setup using advanced RFID-enabled SmartSYNC torch and a revolutionary one-piece consumable cartridge that provides traceable usage data. Technical data: Cutting performance: Recommended cutting capacity: 32 mm - 500 mm/min Maximum cutting capacity: 38 mm - 250 mm/min Severance capacity: 50 mm - 125 mm/min Dedpfxjw U Stqo Ab Tswf Piercing: 22 mm Typical gouging: Metal removal rate: 8.6 kg per hour Gouge profile: 6.6 mm (D) x 6.0 mm (W) Scope of delivery: Power cable, H105 handheld torch 23 m, 75° Workpiece lead with clamp, Operating manual Option: Hypertherm cartridge reader, software

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser source manufacturer: MAX, laser power: 6,000 W, warranty duration: 12 months, Equipment: CE marking, cooling unit, dust extraction, Brand new 4th generation laser cutting system SF3015H is designed for high laser power outputs up to 20KW. Our laser cutter is equipped with a MAX 5G 6KW laser source! Integrated control cabinet included. The system features an automatic pallet changer, which significantly reduces loading times. The machine bed is reinforced. The machine has an automatic smoke extraction system. Machine controls are in German. HANLI water chiller. Purchase ex-stock Büren, including setup and training, with a 1-year warranty. For further inquiries, please contact us directly! Dwsdpfx Abek R T Nme Tef

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, control type: CNC control, Equipment: documentation/manual, Technical data: Useful length: 3240 mm Performance at 400N/mm2: 6.00 mm Stroke of upper beam: 1030 mm Bending beam adjustment: 180 mm Drive power upper beam: 2x 9.45 kW Drive power bending beam: 2x 9.42 kW Upper beam Upper beam pre-stop from 15 mm Geometry: 180° Hydraulic tool clamping (WZS 5000) Bending beam Djdpfxsxn Dhls Ab Tswf Up’n Down bending beam, program-controlled Pneumatic clamping WZS 7000 Motorized bending beam adjustment 180 mm Motorized bending center adjustment 100 mm Motorized central crowning

Condition: excellent (used), Year of construction: 2021, DMU LASER TECH Fiber Laser Welder Djdjv Amxmopfx Ab Towf Like new - Year 2021 CE. 1 Kw MT 1000P Complete with cable and torch.

Condition: ready for operation (used), AMADA PROMECAM 3000 x 6 shears Type GPX 630 Capacity 3000 x 6 Djdevt Svrspfx Ab Towf Maximum stroke 160 mm Rate 16 to 45 strokes/min Cutting angle from 40' to 2°20' Rear stop stroke 1000 mm Motor 15 kw Approximate weight 6500 kg Dimensions 3750x2000x1850 mm

Condition: good (used), Plasma cutting machine, plasma cutter, for plasma cutting system -Manufacturer: Hypertherm -Type: HySpeed HT2000LHF -Equipment: with hose package and cutting nozzle head -Max. cutting current: 200 A -Dimensions: 1100/720/H1040 mm Weight: 459 kg Dwodpfx Abewd Tg So Tof

Condition: refurbished (used), functionality: fully functional, control type: CNC control, actuation type: electric, controller model: System 6000 Touch, working width: 3,200 mm, number of axes: 5, type of crowning: CNC-controlled, sheet thickness steel (max.): 3 mm, back gauge adjustment: CNC-controlled, back gauge: 3,050 mm, Equipment: documentation/manual, emergency stop, foot remote control, RAS Flexibend 73.30 MB 6000 Touch (automatic crowning / folding beam) Technical data: max. sheet thickness: 3.0 mm (steel sheet) max. working width: 3200 mm Dodpfx Absxu Enas Towf Weight: 4.3 t Backgauge: 1550 mm CNC standard (optional L-backgauge extension up to 3050 mm) Condition: reconditioned (overhauled) (new spindle oil, new toothed belt on upper beam, reworked backgauge, etc.) Equipment: Automatic crowning in folding beam, movable foot switch on rail

Condition: good (used), Year of construction: 2002, sheet width 3220 mm plate thickness 3.0 mm ST Dodpfx Ajxcp N Rjb Tjwf thickness at "Niro-steel" 2.0 mm upper clamping bar adjustment 300 mm adjustment speed 100 mm/sec 80.0 mm Bending speed 120 °/sec work height max. 869 mm back stop - adjustable 1.0 - 1.500 mm compressed air 6.0 bar control POS 2000 total power requirement ~ 8.8 kW voltage 400 V weight 4380 kg range L-W-H 4575 x 2450 x 1737 mm New price including accessories approx. 110.000 Euro From a maintenance workshop In good condition (!!) - in checked conditions - machinevideo - ?v=8jPsMSxC6pU Equipment: - Motorized universal folding machine "SERVO POWER BEND" * High-precision mechanics with modern control technology * For single and series production * Robust high-speed machine with high axis speeds * Torsion-free welded construction - SCHRÖDER CNC control model "POS 2000" * With touchscreen control panel * Color display * USB interface * Automatic cutting calculation * Material and tool library * Precise bending simulation * Windows XP operating system - Servo-converter-controlled drives * For bending beam/upper beam & electric backgauge - CNC electric-driven lower beam adjustment - CNC electric-driven backgauge * Travel speed 300 mm/sec. - With rear sheet support surface, including ball transfer units - 1x freely movable double foot switch - 2x front emergency stop buttons - Operating instructions (PDF) * Optional accessories included: - 1x split set of bending rails - bottom (installed) - 1x extra bending rail 25.0 mm - 1x extra bending rail 10.0 mm - 1x extra bending tool for the top - POINT - 1x extra split set of bending tools for the top - GOAT'S FOOT * Tool height 170 mm