CNC LATHE

Citizen CINCOM M16-III

Condition: used, Year of construction: 2011, bar material dia. 32 mm spindle passage 38 mm turning length 320 mm turning speeds 8000 U/min c-axis 0,001 ° Grad gripping station 32 turning length 150 mm turning speeds 8000 U/min c-axis 0,001 ° Grad number of tools 4+7+6+10 =27 number of milling stations 4+4 Psdpfx Aow Ed Tfsalepl control Mitsubishi M70 Number of axles 5+2x C Achse 7 St. chip conveyor ja/yes LNS total power requirement 7,5/5,5 kW weight of the machine ca. 3300 kg dimensions of the machine ca. 2,5 x 1,2 x 1,82 plus FMB m swiss type machine Citizen A32-VIIPL,built 2011, with Barloader FMB Turbo 3-36, Excellent conditions. Main spinle motor and spindle bearing are new. Attachment: all comes with. It is the only one in the production.

Condition: as good as new (ex-display), Year of construction: 2013, operating hours: 1,265 h, functionality: fully functional, spindle speed (max.): 20,000 rpm, turning diameter: 4 mm, Equipment: documentation/manual, rotational speed infinitely variable, Citizen R-series of automatic lathes dedicated to small-diameter machining. This machine is used very little (15800 parts cut). model year 2013. With ASP-04 barfeeder. VAT is not needed if the sales happen outside of Turkey. Podpfxsvtance Aaljpl

Condition: used, Year of construction: 2017, machine/vehicle number: 119, Lg.no. 24217 Podpfjtpnplex Aalepl Technical data: - max. working width 2520 mm - max. material thickness at 40 kp / mm² strength 3.5 mm - preselectable bending angle setting - upper beam drive 400 V / 1.1 kW - Bending beam drive 400 V / 4.0 kW - Space requirement approx. W 3900 x H 1550 x D 1200 mm - Weight approx. 4500 kg

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 31 h, 3D Coordinate CNC measuring device Profitech Innometrik Advanced in gantry design (demo unit at a special price) Open Cable Pjdpfx Aaodyah Sslepl Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Passive vibration isolation pads Technical specifications Measurement paths: X: 500mm Y: 600mm Z: 400mm Max workpiece weight: 250kg Weight of the machine: 850kg Dimensions over everything: 1290x1160x2350mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.2μm Volumetric length measurement deviation: MPEE = 2.2+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Air Supply: Minimum air pressure: 6bar Air consumption: 90NI / min Also configurable as a complete package with touch probe, software commissioning and training. (Annual maintenance & calibration can also be offered)

Condition: used, Year of construction: 2005, Technical details: x-travel: 750 mm y-travel: 406 mm z-travel: 508 mm weight of the machine ca.: 4 t bore spindle turning speed range: 12.000 U/min HAAS VF-2 is a 3-axis machining center designed for precision, high accuracy and reliability. * Psdpjx Iwr Tsfx Aaljpl

Condition: like new (used), Year of construction: 2022, operating hours: 850 h, functionality: fully functional, turning length: 610 mm, turning diameter over cross slide: 500 mm, turning diameter: 725 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 260 mm, feed length Y-axis: 80 mm, feed length Z-axis: 610 mm, torque: 250 Nm, bar passage: 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE CNC control featuring ShopTurn! CNC turning center for complete machining of turned/milled parts. Key features include: - Integrated spindle motors, counter-spindle, water-cooled (preloaded roller guides) with Y-axis, operative on main and sub-spindle - Latest SINUMERIK ONE control with ShopTurn conversational programming Main Spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Sub-Spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Tool Turret: - 12-station VDI 30 radial turret with directional logic for up to 12 driven toolholders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-Axis: - Travel: ±40 mm Additional Equipment: - Hollow chuck cylinder incl. draw tube - C-axis for both spindles - Sinumerik ONE / OPERATE control - 22" multi-touch display - ShopTurn, 3D simulation, remnant material detection - USB interface - Electrical cabinet climate control - Coolant system incl. pump (3.5 bar) - Chuck flushing (extra pump 3.5 bar) - Parts ejector and flush through sub-spindle - Hydraulic unit - Interface for chip conveyor - Documentation and CE certificate - Control languages: German / English - Electronic handwheel - EMCO TOOL BREAKAGE AND WEAR MONITORING / SINUMERIK ONE - Alternating spindle speed - Sub-spindle as tailstock: This cycle allows use of the sub-spindle with mounted live center for workpiece support, permitting shaft machining even on machines without a conventional tailstock. Max. support force limited to 50% of maximum axis force. - EMCO PROFI-NET ROBOTIC INTERFACE: Connection interface for robot integration via HARTING connector. Signal exchange via Profinet. Safety signals: 2-channel/potential-free. - Digitalization package for Sinumerik: Condition monitoring - SIEMENS ONE INTERFACE for connection to MDE/BDE systems. Standard info includes: • Machine on - AUX ON • Automatic mode Podpox E Dncsfx Aalspl • Production mode - program active • Program running and override between 95–105% • Part count pulse (M30) • Programmable pulse (M300) - 3D machine data / MT65-G2: 3D model of the machine included Pneumatically actuated finished parts catcher for gentle unloading of finished components. Parts are transported to a collection box (standard) or onto a conveyor belt (optional). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For connecting the EMCO SL1200 bar feeder. Etc. The machine is immediately available!

Condition: excellent (used), Year of construction: 2010, 7 axes Control FANUC 18i-TB Max. bar diameter 16 mm (main spindle) Max. bar diameter 16 mm (sub spindle) Max. spindle stock travel 205 mm Max. spindle speed 10,000 rpm Podpfxownd Dpe Aaljpl Tools 5-position turning tool holder on linear slide 4-position drilling unit incl. drill holders (front/rear) 3 driven tools for cross machining on linear slide 4 tools incl. drill holders for rear machining

Condition: good (used), Year of construction: 1996, functionality: fully functional, STAR SH-12 CNC long lathe TECHNICAL DATA Turning diameter: 13 mm Headstock stroke: 140 mm Speed: 400 – 10,000 rpm Spindle power: 1.5 kW Number of tools: 5 Number of tools in the device: 3 Dimensions of the machine: 1500 x 950 x 1650 mm Weight: Approx. 950 kg Psdjvllmhjpfx Aalspl SCOPE OF OFFER Among other things: (list not exhaustive) STAR SH-12 CNC lathe Bar loader Coolant pump Transformer Exact scope of offer according to photo gallery We accept no liability for the accuracy, completeness and timeliness of the information.

Condition: excellent (used), Year of construction: 2020, Two machines of the same type with automation (linked) HAAS control system Travel paths X/Y/Z: 711 / 406 / 394 mm Spindle speed 12,000 rpm Ppedpfx Aev Iypcoalel Tool magazine for 20 tools, BT 30 4th axis HRT 210 with counter bearing Spiral conveyor Schusta automation with YASKAWA robot

Condition: used, Article: clamping head Manufacturer: Different For multi spindle automatic lathes, used and new Please, contact us for getting more information and pictures on mail(at) or Pedpfxsn H Nzue Aalepl *