Automatic lathe
Citizen Cincom L20-VIII

Name: Citizen Cincom L20-VIII
Brand: Citizen
Availability: InStock

Year of construction

2008

Condition

Used (fully functional)

Location

Germany

Machine data

Machine type:: Automatic lathe

Manufacturer:: Citizen

Model:: Cincom L20-VIII

Year of construction:: 2008

Condition:: excellent (used)

Functionality:: fully functional

Operating hours:: 9,000 h

Price & Location

Location:: Rheinland-Pfalz, Deutschland

Call

Details about the offer

Listing ID:: A20080045

Update:: 26.09.2025

Description

TECHNICAL DETAILS
Control: Mitsubishi Meldas 700

Main Spindle
Machining diameter: 20 mm
Machining length without repositioning: 200 mm
Iedpfxoxf Hqqs Abnoif
Spindle bore: 24 mm
Spindle speed: 200 - 10,000 rpm
Spindle indexing C-axis: 0.001°
Motor power (built-in motor): 2.2 / 3.7 kW

Sub-Spindle
Machining diameter: 20 mm
Spindle speed: 200 - 8,000 rpm
Spindle indexing C-axis: 0.001°
Motor power: 0.75 / 1.5 kW

Driven Tools at Vertical Holder
Speed: 200 - 4,500 rpm
Motor power (AC servo motor): 1.0 kW
Number of tools: 6

Tool System
Turning tools (12x12x130): 5
Tool holder/parting-off blade (16x12x130): 1
Drilling tools (front): min. 3
Drilling tools (rear): 5
Tool holders, quills (diameter): 19.05 mm
Tool holders, turning tools (shank cross-section): 12 mm

Collets and Guide Bush
Collet main/sub-spindle: F25 (145E)
Guide bush (Neukomm): T223 (22.001)

Rapid Traverse
All axes: 32 m/min

Machine Specification
Required space (without magazine) L/W/H: 2,430 x 1,085 x 1,770 mm
Spindle height: 1,050 mm
Machine weight: 2,150 kg
Power supply: 8 kVA

EQUIPMENT
- 6 turning tools (12 mm shank cross-section),
- 3 driven tools for cross machining
- 3 driven tools for face machining on the main spindle
- 3 driven tools for face machining on the sub-spindle
- Main spindle with C-axis
- Sub-spindle with C-axis
- 3x powered tool rear side machining
- Yellow warning light
- Interior lighting
- Workpiece conveyor belt
- FMB Turbo 3-26 bar feeder
- Option for long parts
- Spindle flushing (Scherzinger pump)

The listing was translated automatically. Translation errors are possible.

Documents

20080045-01.pdf

Seller

Registered since: 2023

1 listing online

Call

Send inquiry

Telephone & Fax

+49 7234 ... show

These listings may also fit your interest.

Listing

Machining Center - Vertical HURCO VM 30 i Plus

Hilden

18,567 km

Machining Center - Vertical
HURCOVM 30 i Plus

Call

Condition: used, Year of construction: 2022, surface area 1321 x 610 mm max. table load 1800 kg travel -x axis 1270 mm travel -y axis 508 mm travel -z axis 508 mm spindle cone SK40 number of spindle speeds 12000 U/min spindle capacity 15 kW spindle torque max. 82 Nm rapid traverse y/x/z axis 28 m/min control HURCO MAX5 total power requirement 21 kW weight of the machine ca. 4,25 t dimensions of the machine ca. 4,1 x 3,35 x 2,6 m the machine is like new!!!, only 136 spindle hours Tool changer: - Magazine capacity: 24 positions - Max. tool diameter: 80 mm - Max. tool length: 250 mm Iisdpfsza Hquox Abnef - Max. tool weight: 7 kg Accessories: documentation

See details

Listing

CNC Lathe with Y-axis, driven tools an 2 Mori Seiki NL 2500 SY / 1250

Zevenbergen

18,629 km

CNC Lathe with Y-axis, driven tools an 2
Mori SeikiNL 2500 SY / 1250

Call

Condition: used, Year of construction: 2008, turning diameter: 275 mm, spindle bore: 80 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,345 mm, total height: 2,232 mm, total length: 4,339 mm, total width: 2,232 mm, overall weight: 7,600 kg, Equipment: documentation/manual, CNC Lathe with Y-axis, driven tools an 2nd spindle CNC Control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 / 366 mm Spindle bore diameter 80 mm Spindle speed 4000 R/min Spindle motor 18.5/15 Kw Movement X-axis 260 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1345 mm Movement W-axis (subspindle to mainspindle) 1275 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper BMT Bar feeder LNS Quick Load Servo lll Spindle motor driven tools 6000 R/min Iedpfx Aoy Nyzgobnsif If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

See details

Listing

CNC turning and milling center Spinner TC 52

Blumberg

18,708 km

CNC turning and milling center
SpinnerTC 52

€11,000

Fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 2007, Type: CNC Lathe (horizontal) Manufacturer: Spinner Model: TC 52 Year of manufacture: 2007 Ijdpfoyki Hmox Abneif Serial number: 123445 Control: Fanuc Three-axis machine: XZ C (C-axis is positioning only – no driven tools) Bar diameter: 42 mm Three-jaw chuck: 165 mm Operating/spindle hours: approx. 32,500 h / 6,400 h (read 11/2025) Accessories: chip conveyor, high-pressure coolant (IKZ), chuck, documentation Condition: Good

See details

Listing

Borrby

17,890 km

Center lathe
TOSSUS 80

Call

Listing

Kłodawa

18,012 km

Sandig machine
HOUFEKRR 630 mm

Call

Year of construction: 2001, condition: like new (used), Double-aggregate grinder, two lower aggregates 2 x7.5 kW main power, 4 kW feed, lifting and lowering 2 kW, the machine after renovation, conveyor belt in very good condition. New graphite shoe. The machine has two aggregates from the bottom, contact rollers rubber first shaft second Combi system with graphite runner. Working width 630 mm. Two feed speeds slower faster. Length of grinding belt 1900 mm. Pneumatic oscillation. Tensioning the belts pneumatically. Speed of grinding belt 18 m / s. grinding shoes 1. Declaration of conformity CE power 21 kW nominal whole. Machining height 160 mm. Maszyan has two lower working shafts. Transport tape top system. Iiodsfxpbmepfx Abnjf

See details

Listing

Turning Automatic Lathe - Longitudinal CITIZEN L32-1M8

Germany

18,384 km

Turning Automatic Lathe - Longitudinal
CITIZENL32-1M8

Call

Condition: used, Year of construction: 2019, bar material dia. 32/38 mm spindle passage 44 mm turning length 320 mm turning speeds 200-8000 U/min c-axis 0,001 Grad gripping station 32/38 mm turning length 120 mm turning speeds 200-8000 U/min c-axis 0,001 0 number of tools 13 fix number of milling stations 4+5 driven control Mitsubishi Meldas M70 Number of axles 5+2 St. total power requirement 7,5 kW weight of the machine ca. 2850 kg dimensions of the machine ca. 2,5 x 1,4 x 1,75 + FMB m CNC sliding headstock machine Citizen L32-1M8, built 01/2019 with barloader FMB turbo 3-36 equipped with swarf & coolant tank, fire distiguisher. ON/OFF 29.564h (status 24.03.2026) Running hours 26.607h (status 24.03.2026) GBL function (standard) Iodpsy Hl Hisfx Abnoif LFV function: no

See details

Listing

Red wine fermenter Tanks unit DEFRANCESCHI 100 000 Liter

Estavayer

18,872 km

Red wine fermenter Tanks unit
DEFRANCESCHI100 000 Liter

Call

Condition: good (used), Consisting of : - 3 tanks of 18000 litres - 3 tanks of 15300 litres - With walkways - Material: AISI 316 - Square discharge door (bottom) - Motorised mash discharge - Round manhole DN 400 (cylindrical part) - Total emptying: ball valve Ø 40 Friedrich no 2 - Partial drain: ball valve Ø 40 Friedrich no 2 - Taster - Recirculation with ball valve Ø 40 Friedrich no 2 - Dome Ø 400 mm, eccentric - Central dome DN 400, with a cylinder-grid fixed inside (to keep the mash cake wet) Dimensions : - 3 tanks 18000 litres: Ø 2000 mm, height 5600 mm - 3 tanks 15300 litres: Ø 2000 mm, height 4800 mm Iisdpsib H Ddefx Abnsf - Ground clearance: approx. 550 mm

See details

Listing

Bauer MC 96 / HDS / BC 40 Bauer MC 96 / HDS / BC 40

Wilhelmshaven

18,314 km

Bauer MC 96 / HDS / BC 40
BauerMC 96 / HDS / BC 40

Call

Listing

WEBER NE5 with 2 Co-Extr. WEBER ZE30 WEBER NE5 - ZE 30-ZE 30

Bockhorn

18,336 km

WEBER NE5 with 2 Co-Extr. WEBER ZE30
WEBERNE5 - ZE 30-ZE 30

Call

Year of construction: 2001, condition: excellent (used), Single screw extruder WEBER NE5 1-30:D with 2 co-extr. WEBER ZE30 Year of construction 2001 Screw diameter 50 mm Application:PE-PP, Three-layer pipes or pipes with colored stripes The plant has manufactured heating pipes Condition: very good 2 Co-Extruders WEBER ZE30 Screw diameter 30mm Iiodpfx Abehy Tp Donef The three-layer pipe system is my property Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany

See details

Listing

Continuous rotary table polishing machine BULA MP81 - sofort verfügbar

Dietzenbach

18,555 km

Continuous rotary table polishing machine
BULAMP81 - sofort verfügbar

Call

Condition: reconditioned (used), Round table polishing machine make Bula, model MP81 for sale. Continuously turning machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of the polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Subject to prior sale. Ijdpolccvmjfx Abnoif Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 1 high-pressure dosing pistol WIDOBERG HDP-2, brackets, timer, etc. and pressure container.

See details

Advertise here