Vertical Machining Centre

Cincinnati Milacron Arrow 750

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Psdpfx Ahelz Rvlszepl Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), total height: 3,300 mm, total width: 3,450 mm, total length: 6,000 mm, controller manufacturer: Siemens, empty load weight: 17,000 kg, Model: FTV 850 Koeling door spindel Het werkgebied kan in twee secties worden verdeeld 2 magnetische tafels Bewegende kolom, vergelijkbaar met Mazak VTC / Unisign / Hedelius Zware chassisstructuur Longitudinal travel X-axe: 1800 mm Crosstravel Y -axe: 850 mm Travel Z-axe (Height): 800 mm Dimensions clamping space - table: 2300 x 900 mm Universal (2x 360°): ISO 50 Psdjwxz D Uopfx Ahzjpl Boring head (1 x90°): 19 kW

Year of construction: 1971, condition: excellent (used), Horizontal internal broaching machine Arthur Klink RIW 16x1800 -WAG 718- Manufacturer: Arthur Klink Type: RIW 16 x 1800 Year of manufacture: 1971 Ppodpfjhpqquox Ahzel Max. Tractive force: 16t Max. Stroke: 1800mm Max. Cutting speed: 7m/min Max. Return speed: 25m/min Max. Tool diameter: Ø 95mm Weight: 4,8to

Condition: good (used), Year of construction: 2014, Technical data shown on photos. Parts shown by hand not come. Ppodeufp Svspfx Ahzsl

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: 17065, Manufacturer: henning Model: U6/1000 Machine no.: 17065 Year of construction: 1979 Weight: 1.100 kg General / technical data: used mechanical vertical broaching machine Henning, in working condition Tractive force: 6,000kg (60KN) Clearing speeds: 3m/min and 6m/min Return speed: 6m/min maximum stroke: 1,000mm maximum tool length: 1,200mm table size / work surface: 600x460mm / 480 x340mm Table aperture: Ø 170mm with eccentric table insert with Ø 90mm bore for standard broaching mandrels (Rausch system) Workpiece diameter: any Dimensions (h x w x d): 1,650mm x 1,200mm x 700mm (h= table height to floor without superstructure) Motor: 7.4 /10kw Ppedpfx Ahjup Uzfszel Power supply: 380 Volt / 50 HZ Accessories / special equipment: - Integrated coolant system - Return circuit with double actuation mode - Machine documentation - Automatic clamping jaw opener in the lower drawbridge position (tool removal) - Tool clamping with universal clamping jaws for flat shanks DIN 1416 BL 6 Remark: The machine is in original condition, the function has been tested. The machine is mechanically driven by a trapezoidal threaded spindle and a geared motor. In contrast to most mechanically driven broaching machines in which the trapezoidal spindle forms the drive and guide element, this machine has additional guide columns. The machine is therefore additionally column-guided and very stable. The double spindle drive is ideal for a continuously constant cutting speed, even with higher tensile forces. The machine is in our warehouse and can be inspected under power.

Condition: used, Year of construction: 1996, Technical details: x-travel: 762 mm y-travel: 510 mm z-travel: 560 mm control: Heidenhain TNC 415 OR 360 tool changer with: 21 place table clamping surface:: 865 x 510 mm table load: 455 kg tool taper: SK40 spindle revolutions per minute : 60 - 8000 U/min feed:: X/Y/Z; 15 000 mm/min rapid traverse : X/Y/Z: 24 m/min compressed air: Bedarf: 5,5 bar Total power requirement: 30 kVA motor capacity: Spindelmotor: 11,0 kW max. torque on the spindle: konstant: von 60 - 750 KN Weight approx.: 4,3 t dimension machine xH: 2,6 x 2,8 x 2,6 m dimension coolant device: L: 2,7 x B: 0,8 x H: 0,8 m Pedpfju Idmvjx Ahzopl Machining center with automatic tool changer IKZ and coolant supply through nozzles Chip and coolant tray Lubrication system through ball screws Manual control unit Heidenhain TNC 415 - dialog or according to ISO (machining cycles: deep hole drilling; tapping; slot milling; rectangular pocket and circular pocket milling; SL cycles), up to 100 programs in file management Machine can be visited with pleasure under power. i.D. *

Condition: ready for operation (used), Matsuura RA-1G RA-IG Machining Center X axis: 550mm Y-axis: 410mm Z-axis: 460mm RPM: 15000 RPM Ppjdott Sxdopfx Ahzsl Cone: 40mm Steering: yasnac Year of construction: 1999 Transport dimensions: 250x270x235 cm (LxWxH) With pallet changer With tool changer 30 pieces with chip removal Video available on request! Location: Hamont-Achel, Belgium Matsuura RA-1G RA-IG Bearbeitungszentrum X axis: 550 mm Y-axis: 410 mm Z-axis: 460 mm Speed: 15000 U/min Cone: 40 mm Kontrollen: Yasnac Construction year: 1999 Transport dimensions: 250x270x235 cm (LxWxH) with pallet handler Mit Werkzeugwechsler 30-teilig with clamping device Video auf Anfrage erhältlich! Standort: Hamont-Achel, Belgium Matsuura RA-1G RA-IG Machining Center X axis: 550mm Y axis: 410mm Z axis: 460mm Speed: 15000 RPM Cone: 40mm Controls: yasnac Year of construction: 1999 Transport dimensions: 250x270x235 cm (LxWxH) with pallet changer With tool changer 30 pieces with chip removal Video available on request! Location: Hamont-Achel, Belgium

Condition: good (used), Year of construction: 1988, functionality: fully functional, • Maximum turning diameter (over bed): up to 300 mm • Maximum turning length: up to 500 mm • Spindle bore: 51 mm • Maximum spindle speed: 5500 rpm • Axis travel: • X: 215 mm • Z: 438 mm • Turret head: 12 positions, VDI 30 tool holders • Control system: Vickers Acramatic 2100 or FANUC 21i-T (depending on version) • Main motor power: 7.5 kW Ppodpfswatmdox Ahzel • Machine weight: approx. 3500–4000 kg

Condition: used, Year of construction: 1994, Matsuura 3 axis machining center in very good condition. Can be inspected under power upon appointment and available for immediate delivery. More technical details in the pictures. X axis 1020 mm Y axis 510 mm Z axis 510 mm Distance from tabel to spindle end 200 mm Table working surface 1100 x 510 mm Table loading capacity 600 kg Max spindle speed 15000 rpm Ppodpfxswt Shae Ahzjl Max spindel torque 235 Nm Tool storage capacity 30 pieces Max tool length 300 mm Max tool weight 8 kg Type of tool holder BT40 Chip conveyor yes Machine weight 6400 kg

Condition: ready for operation (used), Year of construction: 1995, Control Unit Brand SIEMENS Model Acramatic A21000 Main Drive Number of axis 3 Movement X-Axis Movement 500 mm Y-Axis Movement 500 mm Z-Axis Movement 450 mm This 3-axis Cincinnati Milacron Arrow 500 was manufactured in 1995. A vertical machining centre designed for precision and efficiency, it's ideal for detailed work in various materials. If you are looking to get high-quality milling capabilities, consider the Cincinnati Milacron Arrow 500 machine we have for sale. Contact us for more information. Application Types Milling Podpfx Ahsx D R R Sozopl