Milling center cnc

Chiron FZ18L X2000mm 4 axis nikken

Condition: used, Year of construction: 2012, Technical details: turning diameter over bed: 20 mm spindle passage: 3-20 mm turning length: 250 mm control: FANUC 31 i-A main-spindle speed: 10.000 1/min subspindle speed: 10.000 1/min Main spindle capacity: 3,7 kW subspindle power: 2,2 kW number of tools: 35 weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,11 x 1,2 x 1,89 m CNC sliding headstock turning/milling centre with B-axis Control system: Fanuc 31i-A Machining length: max. 250 mm Number of controlled axes: 7 axes and max. 5 axes simultaneously Ihedpfx Asvivx Noh Net B-axis: 0°-130° freely programmable Rod passage: Ø 3 mm to max. Ø 20 mm Drive power main spindle: 3.7 kW Drive power counter spindle: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: Main and counter spindle Number of linear supports: 2 pieces Total number of tools: 35 pieces Dimensions (LxWxH) in mm: 2,110×1,200×1,885 Weight: 3,300 kg Conversion from long to short turning Deep hole drilling stations NAKANISHI high-speed spindle Rear slide with Y-axis Cross drilling rear side Chip conveyor Fire extinguishing system FMB bar loader Minimag 20, year 2012 Approx. 7.200 working hours *

Condition: used, Year of construction: 2000, Technical details: x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm b-axis: manuell positionierbar ° c-axis: manuell positionierbar control: Heidenhain TNC 124 tool changer with: nein Plätze spindle taper MT: SK40 Revolution per minute: 4500 U/min. feed speeds infinitely variable: X/Y/Z: max. 14000 mm/min rapid traverse:: 5,0 m/min table-size: 700 x 500 mm total power requirement: 17 kVA Weight approx.: 2,91 t dimension machine xH: 2,0 x 2,0 x 2,5 m CNC universal vertical milling machine The machine has 5 axes. B- and C-axis manual with measuring system. Isdpfx Asu Idffeh Noht B-axis table swivel -10° / +95° and C-axis table rotate 360° (not interpolatable, manually selectable via control). Cooling device (without pump) Operation via swiveling boom *

Condition: good (used), Year of construction: 2006, operating hours: 119,571 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine ON: 119,571 h, Spindle ON: 56,792 h - Spindle HSK-A63 10,000 rpm - 32 tool stations Isdexcp Srepfx Ah Njht - Rotary table SRT 280 mm with integrated clamping system HSK100 (if not needed, it can be covered or alternatively converted to a zero-point clamping system) - External coolant supply - Internal coolant supply with 80 bar paper band filter - Chip flushing gun - Chip conveyor - Handheld control module - Automatic cabin door - 32 tool stations plus 87 additional stations ZM87 - Thermal compensation - BLUM tool measurement on the side - Renishaw probe - Chip container - Status light The machine has been thoroughly inspected and comes with a geometry report as well as circularity test measurements. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: used, Year of construction: 1997, functionality: limited functionality, product width (max.): 510 mm, working width: 505 mm, • Model: Gallus Arsoma EM 510 • Year of Manufacture: 1997 • Web Width: 510 mm • Printing Units: 7 x UV flexo units • Die-Cutting Units: 2 • UV Drying: Included • Glue: Included • Barcode Printing Capabilities: Supported • Web Turnbar (Turner Bar): Included • Web Cleaning: Included • Roll-to-Sheet Conversion: Included • Unwinder: Included • Rewinder: Included Ihsdpfx Aow Ec Smsh Njt • Chiller: Included

Condition: used, Year of construction: 2005, Technical details: screw size: 90 mm injection shot weight in Polysterol: 1.758 g/PS closing pressure: 6500 kN weight of the machine ca.: 32 t Out of serial production Iedotunccjpfx Ah Nsht *

Year of construction: 2010, condition: excellent (used), MULTIVAC T-800 ID.NO. 2569 Multivac T-800 Trough sealer vacuum / gas with 2x complete tools, Tool trolley, vacuum pump, Carsö trough dispenser etc. Year mod 2010 very nice condition! Tool 215 x 167 mm No. 2. 236 x 186 mm. Iedpfxepcda Rs Ah Njht Dimensions line 800 x 100 H 200 cm.

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 1800 kN Working stroke: 115 mm Isdpfx Ahewq Dpqe Njht Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Control: Delem DA-65R The machine starts up, but the control unit does not respond to commands. The previous owner replaced the original AMADA control with a DELEM unit.

Condition: good (used), Year of construction: 2007, functionality: fully functional, drilling depth: 1,150 mm, overall weight: 12,000 kg, drill diameter: 32 mm, Heidenhain iTNC530 cnc control 12-fold tool changer Technische Daten / technical details: Wege: / travels: Iedowcldaspfx Ah Nsht X-Achse längs (Tisch) / X-axis longitudinal (table) 1800 mm Z-Achse quer (Ständer) / Z-axis cross (column) 1700 mm W-Achse quer (Bohreinheit) / W-axis cross (drilling unit) 1150 mm Y-Achse senkrecht (Bohreinheit) / Y-axis vertical (drilling unit) 1200 mm B-Achse (Rundtisch) / B-axis (rotary table) 360 ° A-Achse (Bohreinheit) / A-axis (drilling unit) -25 - +15 ° Bohrbereich-Tiefbohren (ELB): / drilling area-deep drilling (ELB): Durchmesserbereich / diameter range 6-32 mm max. mögliche Bohrtiefe / max. drilling depth 1150 mm Antriebsleistung / drive capacity 40 kW Gewicht der Maschine ca. / weight ca. 12000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. For more technical details please look at the photos

Condition: excellent (used), Year of construction: 2013, operating hours: 24,666 h, functionality: fully functional, - Top functional packaging machine (thermoforming machine) of the PowerPak series. - Perfect for packaging pasta products. - Viewing under production conditions (packaging of gnocchi) possible at any time. - With matching feed belt and ExaktaPack brand scale (included). Technical details GEA PowerPak: - Film width: 350 mm lower web, 334 upper web - Approx. 12 cycles / minute - Forming tools: 1.1, 2.1, 2.2 - Rigid film, PP, PET, etc. - Bottom web preheating - Longitudinal and cross cutting with silent edge strip winding - Machine length approx. 9m Ijdpfx Aoua Hchjh Neht - Draw-off: 60 mm - Busch vacuum pump (included) - Eject station and distribution pneumatic - Flow cooler for cooling form and seal stations. Additional information on request and/or inspection gladly possible.

Condition: used, Year of construction: 2022, DOOSAN DNM 4500 Year of Manufacture: 2022 Control: Siemens 828D touch screen 2x Renishaw probes 12,000 rpm max Through-spindle cooling Ihsdpfx Aoxq Rbwjh Njt Travel in X axis: 800 mm Travel in Y axis: 450 mm Travel in Z axis: 510 mm Maximum workpiece weight: 600 kg Tool magazine: 30 positions SK40 - 2x Renishaw probes - Chip conveyor - Coolant tank with pump - Documentation