Surface Grinding Machine

CHEVALIER SMART-H1640IV

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,000 h, spindle speed (max.): 2,500 rpm, overall weight: 1,800 kg, This Colchester Triumph VS 2500 was manufactured in 2015. It features a conventional pull and lead screw, infinitely variable speed adjustment, and a digital display. Key specifications include a turning diameter of 400mm, center height of 195mm, and a bed width of 1270mm. It also comes equipped with a MultiFix quick-change tool holder, maximum spindle speed of 2500rpm, and a motor power of 7.5kW. Weight is 1,800kg. Contact us for more information about this machine. • Control: Conventional with lead screw and infinitely variable speed adjustment • Readouts: Digital display for axes and digital spindle speed display • Operating hours: No counter; estimated 5,000–7,000 h Dedpox D Nwdefx Aa Escd • Turning diameter: 400 mm • Center height: 195 mm • Bed width: 1270 mm • Toolpost: MultiFix quick-change tool holder Additional equipment • 3x three-jaw chucks • 3 sets of claw jaws • Chuck wrench • Manual/operating instructions • Work area lamp • Digital dial indicator • 4 MultiFix tool holders • Various turning tools • Drill chuck (keyless) for tailstock • Coolant pump

Condition: good (used), Year of construction: 2004, Swing over bed Ø 320 mm Swing over cross slide Ø 150 mm DBC Turning Length 750 mm Spindle bore 52 mm Spindle power 16 kW Tailstock spindle Ø 60 Ø Stroke pinole 140 mm Spindle taper 4 Mk Speeds / ranges 3000 Rpm Feed rate X-Axis 1000 mm/min. Feed rate Z-Axis 2000 mm/min. Djdpfxswu Dq Ao Aa Ejcd

Condition: like new (used), Year of construction: 2021, operating hours: 1,200 h, functionality: fully functional, turning diameter: 1,100 mm, power: 46 kW (62.54 HP), distance between centers: 2,000 mm, load hours: 1,200 h, A DMT CD1100 lathe with Heidenhain control and only 1,200 operating hours is available. The working area offers a swing diameter of approx. 1,100 mm over the bed and approx. 800 mm over the cross-slide. The tool holder is a Multifix D1. The distance between centers is 2,000 mm. The main spindle drive is a motor with 46 kW output at 60% duty cycle and two gearbox stages. Tailstock: - Quill diameter: 125 mm - Taper: 6 Morse taper Delivery: Collection by the buyer Djdpfx Aaexlza Hj Escd Payment: 100% via bank transfer immediately upon invoicing, prior to collection All information is non-binding. Subject to prior sale. The machine is sold without any guarantee or warranty claims and remains our property until full payment is received.

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Dcedpeh Hvk Aefx Aa Eed Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition

Condition: new, Year of construction: 2025, -TFON Edge Rounding & Surface Purification System. -Material Compatibility. Mild Steel, Aluminum, and Stainless Steel. -Working Thickness Range: Accommodates material thicknesses from 0 to 120 mm. -Edge Rounding Provides Radius 2 edge rounding for smooth, safe edges that enhance both the appearance and functionality of the workpiece. -Precision Control: Equipped with a Siemens automation system for accurate and consistent control throughout the entire process. Independent Stations: Multiple processing stations enable versatile operations, allowing different tasks to be performed simultaneously or sequentially Table Options: Available working table sizes of 650 mm, 1000 mm, or 1300 mm to meet specific production requirements Table Types: Flexible configurations including magnetic, vacuum, or magnetic-vacuum tables ensure secure support for various materials and part sizes. Plasma and Oxygen Technology: Utilizes advanced plasma and oxygen technology to effectively remove heavy burrs and dross after cutting, delivering cleaner and smoother surfaces Surface Purification: Efficiently removes surface contaminants such as rust, oxide, and scale, preparing parts for further processing Edge Rounding for Coating: Prepares parts perfectly for painting and coating by ensuring a uniform, imperfection-free surface Industry Applications: Dcodpfx Ashq A T Usa Ejd Ideal for Steel Service Centers, Energy, Mining, Construction, and Automotive sectors, offering tailored solutions for heavy-duty applications. Uniform Results: Six flap wheels operate in unison to provide consistent, equal radius edges on every part. Pneumatic Oscillation System: Extends the lifespan of emery bands by minimizing wear and maintaining consistent performance over time.

Condition: ready for operation (used), functionality: fully functional, spindle bore: 42 mm, center height: 165 mm, center width: 635 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 30 rpm, overall weight: 900 kg, Ladies and Gentlemen, We are selling a Colchester Master 2500 lathe with Heidenhain digital readout. The machine is fully functional and can be tested on site. Availability: immediately Center width: 635 mm Center height above bed: 165 mm Center height above support: 105 mm Spindle bore: 42 mm Spindle speed: 30 - 2500 rpm. 16 steps Dodpfx Aeu St S Aja Escd Inner tailstock taper: MK 3 Drive power: 3.7 kW Space requirement: (LxWxH) 1700 x 880 x 1200 mm Weight: approx. 850 kg

Condition: used, Year of construction: 1994, turning diameter 570 mm turning length 2000 mm control Sinumerik 805 Siemens swing diameter over face slide 365 mm main spindle speeds: 3-2.500 U/min drive of main spindle 15/19 kW spindle bore 62 mm spindle head DIN 55027 No.8 Dedpfju Sbkgjx Aa Ejcd tailstock taper MT 5 quill stroke 190 mm pinole diameter 80 mm feed range - long. and cross 0,01-50 mm/u total power requirement 50 KVA weight of the machine ca. 5 t dimensions of the machine ca. m

Condition: used, Year of construction: 2010, functionality: fully functional, 1 pc Surface Grinding Machine FS 640 SC with Fagor control Dsdpfxex Dgvqo Aa Eecd Make: Geibel & Hotz Year of manufacture: 2010 Technical Data Working Area: Grinding area - Maximum grinding area 600 x 450 mm - Standard magnetic chuck size 600 x 400 mm - Clamping area (table to spindle center) 140 - 525 mm - Standard grinding wheel 300 x 50 x 76.2 mm - Table load incl. magnet 600 kg - Grinding spindle motor power approx. 3.7 kW - Total connected load approx. 11 kW - Table speed 2 to 28 m/min - Cross/vertical feed speed 100-1000 mm/min Required space 3.95 x 3.16 x 2.47 m Machine weight approx. 2.1 t Equipment Machine-specific accessories, belt filter system, magnetic separator, extraction unit Magnetic chuck with adjustable holding force, automatic wheel dressing incl. compensation, Dressing diamond, balancing device, clamping device, 4 grinding wheels Technical data subject to change.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Center height 210 mm Swing diameter over bed: 420 mm Swing diameter in bed bridge: 580 mm Swing diameter over cross slide: 250 mm Center distance: 1000 mm Spindle nose: D1-6 Speed: 45 – 1800 rpm (16 steps) Spindle bore: 52 mm Feed length: 0.05 – 1.7 mm/revolution (17 steps) Cross feed: 0.025 – 0.85 mm/revolution (17 steps) Metric threads: 0.2 – 14 mm (39 steps) Dcsdpfxsx Rt Euj Aa Eed Whitworth: 2 – 72 TPI (45 degrees) Module thread 0.3 – 3.5 MP, (18 steps) Tailstock sleeve diameter D50 mm Tailstock sleeve travel 120 mm Tailstock taper MT4 Power 3.3 kW/400 V Machine weight 1270 kg Dimensions (L x W x D): 1940 x 850 x 1320 mm Accessories - 3-axis digital measuring system - Steady rest - Traveling steady rest - 3-jaw chuck mounted, D200 mm - 4-jaw chuck D250 mm - Chuck guard with safety switch - Rear splash guard - Tailstock - Cooling water system - Chip tray - Tool holder guard - Longitudinal travel stop - Halogen work light - Emergency stop button - CE marking - Machine documentation The machine is a brand new showroom model and has 0 operating hours. It comes with a 12-month spare parts warranty.

Condition: ready for operation (used), Year of construction: 2016, overall weight: 2,220 kg, total height: 1,835 mm, controller manufacturer: MITSUBISHI, controller model: Meldas 700, This 8-axis Citizen Cincom L20E-2M8 was manufactured in 2016, designed for precision Swiss-type turning come with FMB bar feeder and LNS chip conveyor. It features a main spindle with a speed of up to 10,000 rpm and a counter spindle operating at 8,000 rpm. The machine accommodates up to 37 tools, enhancing its capability for complex machining tasks. It includes a Mitsubishi Meldas 700 controller for efficient operation. Consider the opportunity to buy this Citizen Cincom L20E-2M8 Swiss type turning machine. Contact us for more information. CITIZEN Cincom L20E-2M8 with FMB Bar feeder and LNS chip conveyorThe machine is suitable for efficient turning up to 20 mm in machine is designed to accommodate up to 37 tools for machining complex products. Tool sub-assemblies set:Vertical holder with 5 tools4–7 rotating tools for transverse radial machiningDrilling tools 3–9 for front machining0–4 rotating tools for counter spindle4–10 drilling tools for counter spindleBasic configurationBasic bed: block casting with strong linear guides (thermal and vibration stability)Main spindle: 10,000 rpm, C-axis, Ø passage 26 mm (max. bar Ø20 mm)W1: vertical holder with 5 tools (12 × 12 × 130 mm)3× GSC1310 radial rotating tools ER16 (1 kW, 7,500 rpm)GSE3210 rotating unit adjustable 0°/90° for milling unit (3× GSC1310 ER16)U124B drilling block (2+1) for deep holesCounter spindle: 8,000 rpm, optional C-axis, power 0.75/1.5 kWU153B driven tool unit for counter spindle (0.75 kW) + 4× SAU819 adapters Ø19.05Controller: Mitsubishi Meldas 700 (Windows OS, improved processor, LCD 8.4")Simultaneous machining on main and auxiliary spindlesNew sliding door cover design, space-savingTechnical dataMain spindleMax. turning length: 200 mmThroughput Ø: 26 mmMax. bar Ø: 20 mmSpeed: 200–10,000 rpmPower: 2.2 / 3.7 kWPositioning: C-axis (0.001°)Counter spindleMax. bar Ø: 20 mmSpeed: 200–8,000 rpmPower: 0.75 / 1.5 kWPositioning: C-axisMax. workpiece length in collet: 80 mmDriven toolsSpeed: 200–7,500 rpmPower: 1 kW5 tools (vertical holder) + 4–7 radial + 3 in Z-directionTools5 tools (12 × 12 × 130 mm)3-position drilling block on counter spindle (3× Ø25.4 mm)Back machining holders: 3–6 (Ø19.06 mm)GuidesCollets: E145Guide bushing: Neukomm 22.001Machine ER16 / ER11 Additional equipment • Clamping unit Ø25 mm • Pump 15 bar for rinsing the counterspindle • SAU819 adapters up to Ø8 mm • Transformer 3×400V/3×200V, 10 kW Dsdpfx Aaox D Ilte Eecd • Swarf conveyor LNS MH-HB • FMB Minimag 20/3200 bar feeder Dimensions Machine Depth 2300 mm