CNC machining center
BROTHER Speedio S700X1

Name: BROTHER Speedio S700X1
Brand: BROTHER
Availability: InStock

Year of construction

2016

Condition

Used

Location

Halberstadt Germany

CNC machining center BROTHER Speedio S700X1

Show map

Machine data

Machine type:: CNC machining center

Manufacturer:: BROTHER

Model:: Speedio S700X1

Year of construction:: 2016

Condition:: good (used)

Price & Location

Location:: 38820 Halberstadt

Call

Details about the offer

Listing ID:: A20499235

Reference number:: 10411

Update:: 11.11.2025

Description

Ref. -No.: 10411
Manufacturer: BROTHER
Type: Speedio S700X1
Year of construction: 2016
Type of control: CNC
Control: BROTHER CNC
Storage location: Halberstadt
Country of origin: Germany
X-Travel: 700 mm
Y-Travel: 400 mm
Z-Travel: 300 mm
Main spindle drive power: 15,4 kW
Main spindle speed range: 16 - 16.000 RPM
Table surface: 800 x 400 mm
Distance Spindle /Table: 180 - 480 mm
Table Load: 300 kg
Max. Tool Weight: 25 kg
Max. Tool Length: 250 mm
Max. Tool Diameter: 110 mm
Tool change time: 0,8 s
Tool Taper: BT 30
Tool Piece Magazine With: 21 Pcs./pcs.
Feed Speeds X/Y/Z Axis: 10.000 - 20.000 mm / min
Rapid Traverse X-Axis: 50 m / min
Rapid Travel Y-Axis: 50 m / min
Rapid Traverse Z-Axis: 56 m / min
X - axis acceleration: 2,0 G
Y - Axis acceleration: 1,3 G
Z - axis acceleration: 2,2 G
Acceleration time: 0,30 sec
Machine length: 2360 mm
Machine width: 2120 mm
Machine Height: 2500 mm
Weight Of The Machine Ca.: 2,4 t

Further information:
THREAD
Speed: 6,000 rpm
Acceleration time: 0.11 s

CUTTING CAPACITY
Drilling capacity in aluminum: max. 24 mm / F0.2
Drilling capacity in C45 steel: max. 18 mm / F0.1
Tapping capacity in aluminum: max. M22
Tapping capacity in C45 steel: max. M14
Lsdpfx Aoxvw Hdeg Rehp
Milling capacity in aluminum: max. 660 cm³/min.
Face milling cutter: Ø 100 / depth 2.2 mm / F=3000
Milling capacity in steel C45: max. 48 cm³/min.
Face milling cutter: Ø 40 / depth 2.5 mm / F=484

HIGH-SPEED TOOL CHANGER
Stations with directional logic: 21
Change time T - T: 0.8 seconds
Changeover time C - C at n=10,000 rpm and XYZ positioning: 1.4 seconds

Positioning accuracy: ± 0.006 mm
Repeat accuracy: ± 0.004 mm
Accuracy of thread depth: 0.05 mm

Air consumption: 45 l/min
Air pressure: 0.5-0.6 MPa
Air quality: 99% anhydrous

Including FANUC robot / automation

Machine can be inspected under power.

Seller

Registered since: 2017

88 listings online

Call

Send inquiry

Telephone & Fax

+49 208 4... show

These listings may also fit your interest.

Listing

Vertical Machining Centre Brother Speedio S700X1

Spain

19,912 km

Vertical Machining Centre
BrotherSpeedio S700X1

Call

Condition: ready for operation (used), Year of construction: 2014, operating hours: 6,500 h, General Data Measurements width 1800 mm Measurements depth 2200 mm Measurements height 2200 mm Machine weight 5000 kg Control Unit Brand BROTHER Main Drive Spindle speed range 10000 Number of axis 4 Movement X-Axis Movement 700 mm Lodpfx Agexpkt Ro Rohp Y-Axis Movement 400 mm Z-Axis Movement 350 mm Table Table load 250 kg This 4-axis Brother Speedio S700X1 was manufactured in 2014. It features a robust table size of 700 x 400 mm and a maximum table load of 250 kg. Equipped with a high-speed spindle up to 10,000 rpm and a 15 kW motor, it supports a tool magazine with 24 tools. Ideal for precise and efficient machining. Contact us for more information about this machine. Application Types Milling

See details

Listing

5 axis high speed Milling centre Röders Tec RXD5

Soltau

18,283 km

5 axis high speed Milling centre
Röders TecRXD5

Call

Condition: reconditioned (used), travel distance X-axis: 310 mm, travel distance Y-axis: 294 mm, travel distance Z-axis: 210 mm, overall weight: 3,000 kg, spindle speed (max.): 50,000 rpm, used HSC machine RXP800DS - overhauled - Workspace: - X axis: 200 mm - Y-axis: 294 mm - Z axis: 200 mm - Drives of the linear axes: Linear motors in all axes. - Drives of the rotary axes: Highly dynamic direct drives with integrated cooling. - Feeds 0 - 40,000 mm / min in all linear axes. - Network connection: - Tool measurement laser: Diameter and contour measurement, wear monitoring and breakage control of the milling tools. - Chuck control, 1 chuck - Emusion cooling with Oil-mist-suction Lhodpslzhhkofx Ag Rjp - RMS Main Job manager - Spindle max. 60,000 rpm HSK 25 - Tool changer: 24 chain changer, able to operate while machining - High precision option - Remote maintenance via Teamviewer - Transport dimensions machine: W 2,425 x L 1,925 x H 2,700 mm - Weight: approx.3,000 kg The machine is completely checked, measured and overhauled in-house. Please arrange a viewing appointment with us.

See details

Listing

Vertical machining center BROTHER Speedio S700 X1

Contamine-sur-Arve

18,946 km

Vertical machining center
BROTHERSpeedio S700 X1

Call

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT30 - Spindle power : 6.7 [kW] - Spindle speeds : 10.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 700 x 400 x 300 [mm] - Rapid traverses rates (X/Y/Z) : 50 / 50 /56 [m/min] - Cutting feed rates (X/Y/Z) : 1 - 30 [m/min] - Distance table / spindle nose (min./max.) : 330 - 630 [mm] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 - Tool exchange time : 0,8 [sec] TABLE - Table dimensions : 800 x 400 [mm] - Maximum weight upon table : 250 [kg] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 9,5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.050 x 2.220 [mm] - Machine height : 2.497 [mm] - Machine weight : 2.400 [kg] EQUIPMENT - CNC : Brother CNC-C00 - Interface : Ethernet / USB Lhodpfxsvt Eife Ag Rop - Electronic handwheel - Type of divisor : 4e axe CNC intégré * Coolant tank * with high-pressure pump - Coolant through spindle - Electric transformer

See details

Listing

Veliki Otok

18,387 km

Machining centre
BrotherSpeedio S700X1

€60,000

Fixed price plus VAT

Call

Condition: like new (used), Year of construction: 2017, operating hours: 11,700 h, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 27,000 rpm, power: 8.9 kW (12.10 HP), The machine is used for fine machining of small pieces. (Al, steel) Lhedpfx Agjq N Ayfs Rsp

See details

Listing

Turning Automatic Lathe - swiss lathe CITIZEN M 20

Hattingen

18,536 km

Turning Automatic Lathe - swiss lathe
CITIZENM 20

Call

Condition: used, Year of construction: 1998, max. working diameter 20 mm max. working lenght 320 mm bore diameter 10 mm passage of spindle 24 mm Spindle speed 200 - 8.100 min -1 control MITSUBISHI Turning Automatic Lathe - swiss lathe | CITIZEN - M-20 equipped with bar feeder. The machine is in very good condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. Lhjdpfx Aovnwf Ijg Rop - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: M20 | M 20

See details

Listing

Lathe-conventional-electronic EMCO Hypertum 665

Korschenbroich

18,583 km

Lathe-conventional-electronic
EMCOHypertum 665

Call

Listing

Herscheid

18,526 km

Wire EDM machine
MitsubishiMV 2400 R

Call

Listing

Vertical machining center Okuma MB-46VAE

Brno-město

18,106 km

Vertical machining center
OkumaMB-46VAE

Call

Condition: used, Year of construction: 2008, Control system OKUMA OSP-P200M. Cooling threw spindle. otating axe A Tsudakoma 250. Accessories: chip conveyor, probe RENISHAW OMP40 and tool probe. Table 1000 x 460 mm Rozsah pojezdů os: Axe X 762 mm Axe Y 460 mm Lhjdpfswrnapjx Ag Rop Axe Z 460 mm Spindle 50 - 8000 rpm DIN 40 Number of tools in tool changer 48 Machine dimensions 2805 x 2160 x 2746 mm Weight 7100 kg

See details

Listing

Root

18,756 km

Tool presseter
KELCHKalimat C

Call

Listing

Turning Automatic Lathe - Longitudinal STAR MICRONICS SV 12

Germany

15,455 km

Turning Automatic Lathe - Longitudinal
STAR MICRONICSSV 12

Call

Condition: used, Year of construction: 2003, Technical details: bar material dia.: 13 mm turning length: 205 mm turning speeds: 12.000 / 12.000 U/min number of tools: 29 driven tools: ja / yes 19 control: FANUC 16 iT total power requirement: 9 kVA weight of the machine ca.: 1,7 t dimensions of the machine ca.: 2,7 x 1,4 x 1,7 m CNC sliding headstock machine, subspindle,Year 2003 (0450) FANUC 16i-T control with 9 axes, 9 axes (X / C1 / Y / E / B / A / X / c2), Main spindle, speed max. 12,000 rpm, C-axis, Counter spindle with collet, speed max. 12,000 rpm, C-axis, 4-fold tool holder 3 transverse drilling apparatuses Revolver with 8 stations various additional tool holders, quills, Extinguishing system Kraft and Bauer High pressure system SF-Systeme Büchele /SHD 150/ 150bar / 2 x 40 um /3 valves, Parts conveyor belt Manuals Operation/Programming/Electrical/Spare Parts Operating tool machine Up to 29 turning tools and up to 19 attachments possible 9.0KVA Tank capacity 170L Loading magazine FMB Turbo 2-16 /3200/A / from Ø2- Ø20 mm / Machine coolant use: Oil Dimensions machine: approx. 2700 x 1400 x 1700 [mm]. Weight machine: approx. 1700 [kg] Dimensions of loading magazine: approx. 4300 x 600 x 1800 [mm]. Weight of loading magazine: approx. 700 [kg]. Dimensions of peripheral HD system: approx. 1500 x 500 x 1000 [mm] Weight of HD system peripherals: approx. 250 [kg] Dimensions peripherals & accessories: approx. 1200 x 800 x 1000 [mm] Weight of peripherals & accessories: approx. 200 [kg] Dimensions of peripherals & accessories: approx. 1200 x 800 x 1000 [mm] Weight of peripherals & accessories: approx. 200 [kg] Lhedpfxjvivygs Ag Rjp *

See details

Advertise here