RADIAL DRILL

BREDA R55

Condition: good (used), Year of construction: 1989, Ref. -No.: 10600 Manufacturer: G.BREDA Type: R 55 2000 Year of construction: 1989 Storage location: Halberstadt Country of origin: Italy Machine-No.: 16XXXXX Spindle Taper: MK 5 Clamping Area: 1000 - 1700 mm Automatic feeds: 0,06 - 1,00 mm / rev Spindle Speed: 30 - 1200 RPM Drive Capacity - Spindle Motor: 400 V / 5,5 kW Bore Capacity In Steel (Diameter): 55 mm Ledpfx Aexxpcpeg Rshp Weight Of The Machine Ca.: 4800 t Dimensions Of The Machine Ca.: 2,99 x 1,12 x 2,85 m Drill spindle stroke: 240 mm Drilling performance reaming: 80 mm Thread cutting: M 40 approx. Further information: - Reach min. / max. / 320 / 2005 mm - Column diameter 360 mm - Boom stroke 855 mm - Spindle - base plate approx. 1000 - 1700 mm - E - Central clamping - Cube table - Hydraulic vice - Coolant device The machine can be viewed under power by arrangement.

Condition: new, Year of construction: 2024, Electro hydraulic press 110 Ton Made in Italy The P110 MR is equipped with: 400 V 50-60 Hz immersed motor control unit. Pump for fast approach and return in 20 bar calibration. Lodpfx Agofh R N Dj Rshp Adjustable pressure pump with handwheel to obtain the required power. Pressure relief valve with mechanical block to prevent overpressure. Pressure gauge (standard) that allows to calibrate with extreme precision the delivered power. The P110 MR is the only hydraulic press consisting of 2 laser-cut FE 510 monolithic structure uprights. without welding in the places of greatest stress This feature gives it extraordinary robustness. It is non-deformable and guarantees tight working tolerances. The P110 MR is equipped with a 30-litre tank and has a rapid descent speed of 1,400 mm/min. Weight : kg 1,100 Max pressure : bar 350 Max. flow rate : t. 110 Rapid flow rate :l/min 34 Slow flow rate : l/min 5 Inside shoulders : mm 1004 Rapid rod feed : mm/min 1.400 Slow rod feed : mm/min : 130 Voltage : V 400 Frequency :Hz 50-60 Power : kW 3 Max. absorbed current : A 7,3 Cylinder stroke : mm 300 Cylinder diameter : mm 200 Stem diameter : mm 110 Piston descent speed : mm/sec 23 Tank capacity : litres 30

Condition: used, Year of construction: 1990, machine/vehicle number: 187, Ref. No. 25219 Ledpfxoxbdbxo Ag Rshp Technical Data: - Drilling capacity in steel ST 60 approx.: 55 mm - Boring capacity (enlarging): approx. 80 mm - Right/left-hand rotation - Spindle taper: MK 5 - Spindle stroke: 240 mm - Arm reach min. / max.: 320 / 2005 mm - Column diameter: 360 mm - Arm vertical travel: 855 mm - Min./max. distance spindle – base plate: approx. 550 – 1670 mm - Machined base plate clamping surface: approx. 1000 – 1700 mm - 12 spindle speeds: 30 – 1200 rpm - 8 feeds: 0.06 – 1.00 mm/rev - Spindle drive: 400 V / 5.5 kW - Electric central clamping - Cube table - Hydraulic vice RÖHM - Coolant system - Required space: approx. W 1120 x H 2850 x D 2990 mm - Weight: approx. 4800 kg

Condition: used, Year of construction: 1989, bore capacity in steel (diameter) 55 mm arm length 2005 mm workpiece height max. 1500 mm table-size 1500 x 800 mm spindle taper MT 5 spindle turning speed range 30-1200 U/min feed range 0,06 - 1,0 mm/U crossrail adjustment horizontal 495 - 2.000 mm crossrail adjustment vertical 505 - 1670 mm spindle stroke 310 mm column diameter 360 mm distance spindle/base plate 825 - 1670 mm power requirement 4,4 kW voltage 400 V Lhsdpfx Agowvvbio Rop total power requirement 7,2 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 3,00 x 0,80 x 2,80 m - Pole-changing motor with 2 speeds - right / left rotation - machine light - Cube table

Condition: new, Milling drill with gears Fervi T047/400VDA tapping 400V 1,5kW NEW MANUFACTURING " CE ". The machine can be used for the processing of: Milling Drilling Tapping. Drilling capacity on cast iron with pre-hole : ø 40 mm. Max. drilling capacity on steel with pre-hole: 32 mm dia. Milling capacity with insert cutter : 80 mm dia. Lhedpjg Npiwjfx Ag Rop Milling capacity : Ø 25 mm. Tapping capacity : Ø 22 mm. Conical shank : CM 4. Spindle stroke : 130 mm. Sleeve : ø 76 mm. Column : ø 115 mm. Head inclination : ± 60°. Spindle speed : (12) 75 ÷ 3200 rpm. Three-phase motor : 400 V 50 Hz 1,1 - 1,5 kW. Table dimensions : 585 x 190 mm. Keyway : 12 mm. Base dimensions : 648 x 412 mm. Overall dimensions: 740 x 790 x 1960h mm. Weight : 390 Kg.

Condition: used, Year of construction: 1994, throat depth: 1,250 mm, Radial drilling machine Fab. Breda type. R 55-1250 Year of manufacture 1994 Technical details Make: BREDA Type: R 55-1250 Throat: 1250 mm Drilling capacity in steel: 55 mm Drilling capacity in cast iron: 70 mm Tapping capacity in steel: M 50 Tapping capacity in cast iron: M 65 Drill spindle mount: MT 5 Throat: 1250 mm Cross travel of headstock: 930 mm Minimum/largest distance from base plate: 5360 – 1375 mm Vertical travel of the boom: 705 mm Lhodpfx Agev Rpf Sj Rjp Spindle stroke: 310 mm Number of spindle speeds: 12 Spindle speeds: 30 – 1200 rpm Number of feeds: 8 Feeds: 0.06 – 1.0 mm/rev Base plate 2070 x 910 mm Clamping area base plate 1325 x 910 mm Motor power 4.4 kW - 380 volts Dimensions (L x W x H) 2.1 x 1.0 x 2.5 m Weight 3 t Accessories Drilling table 750 x 600 x 550 mm Cooling Hydraulic clamping All information is subject to change. A demonstration is available at any time in our showroom.

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, throat depth: 2,005 mm, drilling capacity: 55 mm, spindle speed (max.): 1,200 rpm, column diameter: 360 mm, stroke length: 855 mm, TECHNICAL DETAILS Drilling capacity in steel (diameter): 55 mm Boring capacity: 80 mm Thread cutting: approx. M40 Arm reach min.: 320 mm Arm reach max.: 2,005 mm Column diameter: 360 mm Boom travel: 855 mm Clamping surface: 1,000 mm - 1,700 mm Automatic feeds: 0.06 - 1.00 mm/rev Spindle speed: 30 - 1,200 rpm Spindle taper: MT 5 Drive power – spindle motor: 400 V / 5.5 kW Quill stroke: 240 mm Ledpfoxn Nbdjx Ag Rohp Spindle to base plate: 1,000 mm - 1,700 mm MACHINE DETAILS Dimensions & Weight Dimensions: 2.99 m x 1.12 m x 2.85 m Machine weight approx.: 4,800 kg EQUIPMENT Electric central clamping Box table Hydraulic vice Coolant device

Condition: used, bore capacity in steel (diameter) / mm arm length / mm workpiece height max. / mm total power requirement / kW weight of the machine ca. / t required space / m Lhedpeud Ttnjfx Ag Rop Table dimensions: 800x800mm Height: 590mm

Condition: used, Year of construction: 1999, CMA Roby5-EX-R Painting robot, complete. Lsdpfx Asq Sdc Uog Rehp The supply does not include gun, painting pump and hf generator

Condition: new, Technical data: Drilling capacity steel Ø: 50 mm Drilling capacity cast iron Ø: 60 mm Tapping steel Ø: 40 mm Tapping capacity cast iron Ø: 50 mm Diameter of the column: 300 mm projection (min/max): 305 - 1275 mm travel of the spindle head (horizontal): 970 mm distance spindle nose - base plate (min/max): 438 - 1330 mm Traverse height of the cantilever: 625 mm Clamping surface of cube table : 635 x 520 x 420 mm size base plate : 1830 x 785 x 185 mm spindle mounting: MK 5 spindle stroke: 270 mm Speeds: (12) 44 - 1206 min-1 feeds: (3) 0.06 / 0.10 / 0.20 mm/rev. Motor power, approx.: 3,7 kW Total height, max.: 2795 mm Weight, approx.: 2300 kg Features: - Simple one-button operation with integrated circuit for automatic release of swing arm movement, automatic stop and automatic clamping. - Boom arm and drill head with independent hydraulic clamping. - A special lift safety device prevents the arm from falling off abruptly or moving on its own, even after a long period of use and corresponding wear. This safety device protects the operator from injury even if the threaded nut is excessively worn. - The column, arm and gearbox can be clamped simultaneously by pressing a button. Standard Equipment: - Threading device - Coolant device incl. pump - machine light - cube table 635 x 520 x 420 mm - Operating tools in box - Operating instructions and spare parts list - protection device for spindle Ledsp Atipepfx Ag Rshp - CE