Procan Control

BOY

Condition: excellent (used), Year of construction: 2014, Boy 100E / Hybrid machine Year of construction: 2014 Injection unit: Screw diameter: 32 mm Injection weight: 92.3 g Injection pressure: 2127 bar Dosing volume: 96.5 ccm Clamping unit: Clamping force: 100 t Distance between tie bars: 430x360 mm Size of the clamping platens: 750x650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: Procan Alpha 2 - touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Control system with air valve Hardened spraying unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Dimensions: Weight: 3530 kg Length/width/height: 4.37x1.21x2.20 m Drive: Pump/motor: 15 kW Heating output: 7.7 kW Total output: 22.7 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request Nwedpfx Adezc Nr Tj Seh

Condition: excellent (used), Year of construction: 1992, Boy 30 T2 Closing 30 tons Nwjdjuh U Izspfx Ad Ssh Year 1992 Scrow 32 Spray weighted 123g

Condition: excellent (used), Year of construction: 2020, Boy XS / Excellent technical condition Year of manufacture: 2020 Injection unit: Screw diameter: 12 mm Shot weight: 4.1 g Injection pressure: 3128 bar Dosage volume: 4.5 ccm Njdpfxszc Nb Uo Ad Sewh Clamping unit: Clamping force: 10 t Tie bar spacing: 160 mm Size of mounting platens: 321x246 mm Ejector: hydraulic Clamping unit: hydraulic Control system: Procan Alpha 4 - Touchscreen Additional equipment: Machine as new Euromap 67 Robot interface Air valve x 6 Integrated side sprue picker Automatic Wittmann loader with Farratech brand dryer Optional: AMF brand clamping elements for tooling available for purchase Dimensions: Weight: 450 kg Length/Width/Height: 1.48x0.52x1.38 m All offered machines are started up by our service technicians prior to sale. A video of the technical inspections of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2017, Boy 55A Pro / Operating hours: 16,624 in automatic mode / Machine in very good technical condition. Year of manufacture: 2017 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Injection pressure: 1508 bar Metering volume: 136.1 ccm Clamping unit : clamping force: 55 t tie bar distance : 360x335 mm size of clamping platens: 665x600 mm Ejector: hydraulic clamping unit: hydraulic Nwedpfx Ajzc Nbzsd Sjh Control system: Procan Alpha - touch screen Additional equipment: Machine in very good technical condition Operating hours: 16.624 in automatic mode Pneumatic core x 2 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/width/height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating power: 7,7 kW Total power: 18,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: ready for operation (used), Year of construction: 2004, General Data Measurements width 2300 mm Measurements depth 2800 mm Measurements height 2700 mm Machine weight 4500 kg Main Drive Nwsdpfxsx D Ikpo Ad Seh Spindle speed range 10000 Spindle motor power CAT40 / SK40 Number of axis 4 Movement X-Axis Movement 762 mm X-Axis Rapid Traverse 24 m/min Y-Axis Movement 508 mm Y-Axis Rapid Traverse 24 m/min Z-Axis Movement 610 mm Z-Axis Rapid Traverse 24 m/min Table Tslots size 18 mm Number of tslots 5 Table load 750 kg This 4-axis Hurco VMX30 was manufactured in 2004. It features a CNC milling machine with a rotary table for 4th axis capabilities. Key specs include a 762 mm X-axis travel, 508 mm Y-axis travel, 610 mm Z-axis travel, and a table size of 1,016 × 508 mm. It supports a maximum spindle speed of 10,000 rpm and a tool magazine capacity of 24. Consider the opportunity to buy this Hurco VMX30 vertical machining centre. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2017, Boy 55A Pro / Operating hours: 17,083 in automatic mode / Machine in very good technical condition. Year of manufacture: 2017 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Injection pressure: 1508 bar Metering volume: 136.1 ccm Clamping unit: Clamping force: 55 t tie bar distance: 360x335 mm size of clamping platens: 665x600 mm ejector: hydraulic clamping unit: hydraulic Control system: Procan Alpha - touch screen Nwedpfx Adezc Nbbe Ssh Additional equipment: Machine in very good technical condition Operating hours: 17.083 in automatic mode Pneumatic core x 2 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/width/height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating power: 7,7 kW Total power: 18,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2016, Boy 55A Pro / Operating hours: 18,153 in automatic mode / Machine in very good technical condition. Year of manufacture: 2016 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Injection pressure: 1508 bar Metering volume: 136.1 ccm Clamping unit: Nwsdpezc Naqjfx Ad Soh Clamping force: 55 t tie bar distance: 360x335 mm size of clamping platens: 665x600 mm ejector: hydraulic clamping unit: hydraulic Control system: Procan Alpha - touch screen Additional equipment: Machine in very good technical condition Operating hours: 18.153 in automatic mode Pneumatic core x 2 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/width/height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating power: 7,7 kW Total power: 18,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Njdslz Rvljpfx Ad Sjwh Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1997, Boy 80 M Year of manufacture: 1997 Injection unit: Screw diameter: 36 mm Injection weight: 132 g Injection pressure: 2085 bar Metering volume: 147.6 ccm Clamping unit : clamping force: 80 t tie bar distance: 410x358 mm size of clamping platens: 680x555 mm ejector: hydraulic clamping unit: toggle lever Control system: Procan CT Additional equipment: Nedpjzc Nadofx Ad Sewh * Dimensions: Weight: 3200 kg Length/width/height: 4.14x1.21x2.07 m Drive: Pumps/motor: 15 kW Heating power: 10,4 kW Total power: 25,4 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2004, Boy 90 M Year of manufacture: 2004 Injection unit: Screw diameter: 42 mm Injection weight: 193 g Injection pressure: 1724 bar Metering volume: 214.7 ccm Clamping unit : clamping force: 90 t tie bar distance: 430x360 mm size of clamping platens: 635x610 mm ejector: hydraulic clamping unit: hydraulic Control: Procan - touch screen Additional equipment: Euromap 12 Robot interface Air valve x 1 Dimensions: Weight: 3100 kg Length/width/height: 4.37x1.21x2.20 m Drive: Pumps/motor: 15 kW Heating power: 11,3 kW Total power: 26,3 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Nwedpfxozc I U Tj Ad Sjh Price: Upon request

Condition: excellent (used), Year of construction: 2008, Injection molding machine BATTENFELD HM 60/350 S Year of manufacture: 2008 Injection elements: Screw diameter: 35 mm Injection weight : 153.8 g Injection pressure: 2083 bar Injection volume: 169 ccm Closure elements: Closing force : 60 t Clearance between columns: 370x320 mm Dimensions of table plates max: 550x530 mm Ejector: hydraulic Closing system: hydraulic Control: UNILOG B6 Additional equipment: Machine in very good technical condition Euromap 67 Dimensions: Nwedpfx Adok Rnq No Ssh Weight: 3100 kg Length/Width/Height: 3.79x1.24x1.88 m Power supply: Pump/motor: 15 kW Heaters: 10.4 kW Total: 25.4 kW

Condition: used, Year of construction: 2000, operating hours: 71,316 h, functionality: fully functional, machine/vehicle number: 39027, clamping force: 220 kN, Please refer to the photos and video for the condition and contents of the offer. The equipment is currently dismantled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. Njdey D Saqjpfx Ad Sowh You will receive a proper invoice. A net invoice can be issued for foreign customers, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our website to view our additional offers. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from the technical data and errors in the article description may occur and are reserved.

Condition: ready for operation (used), Year of construction: 2024, operating hours: 8 h, clamping force: 100 kN, screw diameter: 18 mm, total width: 526 mm, total height: 1,692 mm, overall weight: 450 kg, product length (max.): 1,485 mm, Hydraulic injection moulding machine manufactured in 2024. This BOY XS 161 features a clamping force of 100 kN and a maximum injection pressure of 2298 bar. It includes a 18 mm screw diameter and a theoretical shot volume of 6.1 cm³. If you are looking to get high-quality injection moulding capabilities, consider the BOY XS 161 machine we have for sale. Contact us for further details. • Control system: Procan ALPHA 4, 15" multi-touch HMI • Injection pressure: max. 2298 bar • Theoretical shot volume: 6.1 cm3 • Distance between tie bars: 160 mm (205 mm diagonal) • Max. daylight between platen: 250 mm • Adjustable opening stroke: 150 mm • Min. mold height: 100 mm (optional 50 mm) • Hydraulic system pressure: 300 bar • Oil tank capacity: 28 liters • Installed total power: 6.1 kW • Electrical supply: 400 V 3~ N, 50/60 Hz, 12.4 A • min. machine height: 1380mm • max. machine height: 1692 mm • Footprint: 0.78 m2 • Safety guarding: Fully enclosed clamping zone with clear polycarbonate sliding safety gate and electrical interlock • Peripheral interfaces: Pneumatic and cooling water connectors on the non-operator side • Status indicators: 3-tier LED signal tower (Red/Yellow/Green) Additional equipment (accessories) • 3-liter gravity material hopper • Red 16A CEE power plug • Heavy-duty wooden transport/leveling base Nodpfx Aoyw I Azed Sswh

Condition: good (used), Year of construction: 2004, Peripheral devices Brand: Tool - Temp Type: TT - 157E Available: 14 pieces Nwsdpfsh Hbpwex Ad Soh

Condition: good (used), Year of construction: 2008, clamping force: 900 kN, Equipment: documentation/manual, Technical data: Clamping force: 90 t Screw diameter: 28 mm Shot weight: 74 g Injection pressure: 180 bar Column spacing: 1.5 m: 430x360 mm Plate size: 360 mm: 635x610 mm Nodpfszavbisx Ad Sewh Minimum mold height: 250 mm Language: German, English, Czech, Slovenian Installed power: Power: 22.3 kW Weight: 3100 kg Dimensions: 3.9x1.3x1.9 m