Sawing machine semi automatic

BOMAR Workline 510.350 DGH

Condition: new, The Workline 510.350 DGH is a semi-automatic double miter bandsaw with a swiveling frame design. Equipment features: - Double miter 30° - 45° - 90° - 45° - 30° - Hydraulic full-stroke vice - Infinitely variable bandsaw blade speed - Infinitely adjustable feed and cutting pressure - Automatic cutting pressure regulation - Precision carbide blade guides - Powerful 3 kW drive motor - Simple, easy-to-understand controls - Control panel in ergonomic position - Large-dimensioned hydraulic unit Fgsdpehg Nvysfx Alqeb - Machine built according to current CE standards and safety regulations Includes: - Micro-spray device - Hydraulic blade tension indicator

Year of construction: 1997, condition: ready for operation (used), Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible. Fjdpfx Aeuwrv Djlqjgb

Condition: good (used), Year of construction: 1998, functionality: fully functional, pressing force: 35 t, working width: 2,000 mm, pressure 35to max. bending length 2000mm Fgedpfx Aowagykolqob arrester behind drive capacity 4,5 kW weight 3000kg

Condition: used, Year of construction: 1986, L-beam 120 x 13 mm hole punhing press: pressure 60 t hole punching press: throat 510 mm hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm shear: flat material 500 x 14 mm shear: flat material 400 x 16 mm shear: flat material 180 x 20 mm shear: flat material 120 x 21 mm shear: flat material 100 x 22 mm Fgjdpfx Alot D Nz Aeqob total power requirement 7,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic Section Shear - Combined

Condition: good (used), Year of construction: 1990, machine/vehicle number: 5211, Offer 24289 Technical data: - max. cutting width 3060 mm - max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1.50 ° - Cutting gap - adjustment via adjusting screws - Number of hold-down devices 15 pcs - Stroke rate 23 to 43 /min - Front angle stop - Motorized backgauge position-controlled 15 - 850 mm Fgodpfxot Ucgao Alqjb - Cutting line lighting - E - foot switch - Drive 400 V / 7.5 kW - Space requirement approx. W 3900 x H 1600 x D 2400 mm - Weight approx. 4.5 t

Condition: used, 3-roller bender Brand RAGACHE Type New Tube CP70 Fgsdpfx Aleuluhwsqjb 3 drive rollers diameter 232 mm Rectangle capacity Standard steel 60.0 mm Round capacity Standard steel 40.0 mm Capacity L Standard steel 70.0 mm Capacity U Standard steel 120.0 mm Capacity T Standard steel 60.0 mm Capacity I Standard steel 120.0 mm

Condition: good (used), Used hydraulic band saw FMB Major +VHZ Blade dimensions: 3180x27x0.9mm Blade cutting speed: 20-100m/min Fgjdpfx Alswaauuoqsb Cutting angle up to 60° Cutting capacity at 0° - round: 240mm - rectangle: 300x220mm

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Year of manufacture: 2011 Weight: 1050kg Fgsdpfxjul Svls Alqsb The machine is fully refurbished and tested.

Condition: used, Year of construction: 1990, Technical details: pressure: 100 t chamfer lenght: 3100 mm distance between columns: 2630 mm control for program: CNC-Steuerung CYBELEC max. stroke: ca. 215 mm throat: 255 mm dayligth: 410 mm ajustment speed: 100 mm/sec working feed: 6,5 mm/sec back gauge: 500 motorisch table-size: 3100 x 60 mm work height max.: 890 mm connection voltage: 3x380 V / 50 Hz V total power requirement: 5,5 kW Fedpfx Alou Icdaeqjgb weight of the machine ca.: 7,9 t machine dimensions LxWxH: ca. 3,8 x 1,5 x 2,5 m 500 mm backgauge, width 2570 mm; 2 support frames can be moved manually across the entire width Operation via control panel and/or control stand for two-hand/foot operation Control also via manual control unit incl. accessories in stock i.D. *

Condition: used, pressure 50 t Fgsdpfxera Rrhj Alqob chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm overrun time 59 ms tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm table height 850 mm x-axis 550 mm travel R-axis +/- 50 Number of axles 3 (Y, X, R) St. weight ca. 3600 kg a lot of lower and upper tools incl. work light new control in 2003: Cybelec DNC 1200