CNC lathe / driven tools

Boehringer VDF 180 CM - 1000

Condition: new, AVAILABLE EX STOCK ! Subject to prior sale. OD tube deburring machines clean and remove sharp edges on tubes and profiles caused by sawing. Nedjd Ixbzepfx Afreli Enables simultaneous outside and inside burrs removal without rotating the tube. Deburrs round, square, rectangular and many different tube and profile shapes deburring in few seconds.

Condition: new, Year of construction: 2025, functionality: fully functional, General Control: Siemens 828 D Turning diameter: 400 mm Turning length: 560 mm Swing diameter: 690 mm Bar capacity: 81 mm Rapid traverse speed: 30 / 10 / 30 m/min Main spindle Bar capacity: 81 mm Chuck size: 250 mm Speed: 3,500 rpm Spindle power: 25.5 kW Spindle torque: 424 Nm Counter spindle Speed: 5,000 rpm Spindle power: 10.5 kW Spindle torque: 90 Nm Tool turret Technology: 12 stations Tool drive: 5,000 rpm Power: 5.6 kW Torque: 53.4 Nm Tool holder: BMT-65 / BH X travel: 240 mm Z travel: 120 mm Y travel: 60 mm Equipment Chip disposal: Chip conveyor Coolant supply: Extended 140 liters Tool measurement: Measuring arm in the work area Parts management: Pneumatic part pusher Parts removal: Part catcher Nedpfx Afswlf U Dsrjli Bar magazine: Prepared

Condition: new, Step By Step Wet Painting Systems Elboy Industrial Solutions designs and manufactures full range of paint shops for your product. With ELBOY, you can navigate through your facility with virtual reality in the design phase, enabling you to make the desired changes in the design phase and not to encounter the surprise results. It provides designing and manufacturing services for your application by paying special attention to environmental pollution and work safety issues for the processes of Sandblasting, Putty, Washing, Undercoat and Finishing Coat for all sizes of products. Step by Step are systems with overhead conveyor or floor conveyors which can be designed for all sizes of product. Booths of Sandblasting, Chemical Washing, Pre-coat, Drying, Putty , Top Coat and Baking can be integrated into the system. In order to respectively carry out the processes determined by the system step by step, the automatic doors are opened at the end of the time period and the product automatically proceeds to the next process line. These fully automated systems are controlled via a 15” touch screen and provide various reporting methods such as main computer monitoring, product reporting and score reporting upon the demand and provide remote control. These are the paint shops where your product is designed and manufactured by our engineers in line with your capacity, use area and other demands. Nlodpfxedy Dw Aj Afrsi Maximum efficiency is aimed to be provided with minimum staff and the least space usage at electrostatic powder coating or wet paint, sandblasting, varnishing, coating, washing and similar system requirements.

Year of construction: 2011, condition: excellent (used), Cloos welding robot Qirox QRC 320 incl. control V 6, pedestal for standing arrangement, Cloos welding machine Quinto II 603 ( 600 A), wire feed, welding torch, torch hose package, mech. cleaning, pressure booster 1 rotary tilt table WPK 5000, pick-up weight 500 kg, 1 start preselection, 1 control for customer-provided sliding door Nlsdpeizwv Nofx Afroi gas nozzle sensor, arc seam search, point editor Unit will be completely overhauled and serviced before delivery. Second station with another, same rotary tilt table possible.

Condition: good (used), Year of construction: 2001, Machine is in good condition. Parts shown by hand not come. Nedjrpk Rmspfx Afreli Cutting tools not come.

Condition: good (used), Year of construction: 2002, machine/vehicle number: 022885001, Offer 24342 Technical data: - Fully automatic machine with hydropneumatic feed and MPS control system - with pre-programmable work cycles with infinitely variable speed regulation - Particularly suitable for stainless steel cuts - Workpiece clamping in pneumatic machine vice - Saw blade diameter 370 mm - Cutting speeds infinitely variable 15 - 70 1/min - Miter adjustable Right up to 45°, left up to 45 - 60° - Cutting range at 90° around 130 mm - Rectangle 180 x 100 mm - Square 120 x 110 mm - mitred at 45° around 130 mm - Rectangle 120 x 100 mm - Largest opening width of the pneum. Machine vice 160 mm - Drive 400 V / 3 kW - pneumatic connection 6 - 8 bar - Coolant device Nljdpfjt N Rk Nex Afrei - infeed - roller conveyor 1000 mm - Discharge - roller conveyor with stop + digital measuring device 4000 mm - Space requirement approx. W 7500 x H 2050 x D 1100 mm - Weight approx. 1200 kg

Year of construction: 2022, condition: new, Offer on demand Nodpfxeiw Dgis Afrjli Machine is immediately available

Year of construction: 1992, condition: good (used), Extraction capacity approx .: 1300 m³ / h Filter area approx .: 28 m² Separation bottom near: 100% Arm length: 2 x 2 m Nodpfsfug Eusx Afrjli Arm suction Ø: 150 mm Extraction motor: 380 V, approx. 1.1 kW Required space: 1250 x 600 x 800 mm Weight: 98 kg

Condition: good (used), 3 machine vices Goody. Nledpforai Akox Afrei

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 480 mm, •Turret overhaul in 2021 •Cooling lubricant pump with higher pressure/output in 2021 •Draw tube renewed and headstock re-bearing and ground in 2022 •Prepared for automatic insertion of parts using a robot cell Control: CNC control including color screen Siemens 840 D TECHNICAL DATA Swing diameter max. 550 mm Turning diameter max. 480 mm Turning length 1000 mm Spindle bore 78 mm Drive power (50%) 53 kW Speed range (1-stage) 30 – 4000 1/min Drum turret Number of holders 12, of which 6 are driven Nledpfx Afevr Tkzerei Cylindrical shaft holder 40 mm Speed range (2-stage) 20 – 2500 1/min Tailstock (hydraulic quill adjustment) EQUIPMENT/ACCESSORIES  Full enclosure including work area lighting  Automatic power-operated sliding door  C. axis  Tailstock dragged via program including various centering points  12-way drum turret  Turret drive device  Chip conveyor  Coolant device with reinforced pump, approx. 4 bar  Interface for automation  Various accessories  1 Heimbuch Spanntop SK 80, without collets  1 Schunk Rota NCF 315 three-jaw chuck  1 Schunk Rota NCF 250 three-jaw chuck  1 Schunk Rota NCF 250 two-jaw chuck  1 WTO impact head  2 driven tools CAPTO-Axial tool  2 driven tools CAPTO-Axial Radial tool  3 driven tools CAPTO-Radial tool  7 fixed tool holders  Installation elements  Documentation