Machining center

BIESSE ROVER A FT 2243

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 57269, functionality: fully functional, travel distance X-axis: 4,300 mm, travel distance Y-axis: 2,205 mm, controller model: NC 1000, TECHNICAL DETAILS X-axis working range: 4,300 mm Y-axis working range: 2,205 mm Vertical spindle: 1 unit, HSK F63 Tool changer system: 8 positions (head) Tool changer system: 21 positions (rear, chain) Drilling head: BH 20 Vertical spindles on X-axis: 8 units Vertical spindles on Y-axis: 8 units Horizontal spindles on X-axis: 4 units Horizontal spindles on Y-axis: 4 units Saw unit on X-axis: diameter 120 mm Saw unit on Y-axis: diameter 120 mm MACHINE DETAILS Control: NC 1000 Software: Biesse Works Weight: 400 kg EQUIPMENT FT nesting table with full surface Automatic loading system with side lift table Automatic labelling machine for barcode printing Automatic printing and dispensing system for adhesive labels Automatic unloading system with motorized conveyor belt Front safety and protection system with mats and fences Ksdpfxjydkdge Ahvsww Automatic lubrication system Air conditioning for control cabinet Vacuum pump

Condition: excellent (used), PANELS RETURN SYSTEM for EDGE BANDER (Right) To combine with a single-side Edge Bander allowing the operator (worker) to always stay at the in-feed side of the machine (the processed workpiece will automatically return-back to him). Blowing Air Table, infeed and outfeed (total dimensions mm 3520 x 2560) 180° transfer (mm 3120 x 2140) with motorized roller conveyors and motorized belts Ksdpfsff R Tqsx Ahveww Motorized carpet (mm 9080 x 1560) Panel Dimensions (MIN/MAX): Length - 240 mm / 2800 mm Width - 120 mm / 1300 mm Thickness - 8 mm / 60 mm opt. up to 100 mm

Condition: like new (used), Year of construction: 2017, machine/vehicle number: 10000144427, functionality: fully functional, operating hours: 2,080 h, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 5,580 mm, travel distance Y-axis: 2,917 mm, travel distance Z-axis: 378 mm, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,205 mm, workpiece height (max.): 170 mm, number of slots in tool magazine: 8, controller manufacturer: BIESSE, overall weight: 3,840 kg, table length: 4,300 mm, table width: 22,005 mm, controller model: BH660, spindle motor power: 13,200 W, nominal power (apparent): 13 kVA, number of spindles: 10, rapid traverse Z-axis: 20 m/min, rapid traverse X-axis: 85 m/min, rapid traverse Y-axis: 60 m/min, rotational speed (max.): 24,000 rpm, spindle speed (max.): 24,000 rpm, Equipment: documentation/manual, Biesse Rover A 2243 FT CNC Machining Center with Automatic Loading/Unloading System. This 2017 machine features a large flat grid table of 4,300 mm x 2,205 mm, divided into a 12-segment Multizone vacuum system for independent work-holding. The machine is equipped with a powerful 13.2 kW HSK-63F electrospindle with a maximum speed of 24,000 rpm. Tool changes are handled by an 8-position turret magazine. A BH10L drilling unit with ten independent vertical spindles is also included. Ksdpoxy S Dfefx Ahvjww A key feature is the fully automatic material handling system, including a scissor table for pallet loading (max weight 6 tons), an alignment and labeling machine, and a servo-controlled sweeping arm for automated unloading onto the 4,800 mm discharge conveyor belt. The machine is controlled by a BH660 CNC numerical control and includes the bSolid programming software with the bNest module for nesting operations.

Condition: used, Year of construction: 2017, Numerical Control with B-Solid Software - 3D CAD-CAM program to design, simulate, and manage processes of machining of Biesse machining centers and drilling machines BNest Software - Software module dedicated to processing in Nesting mode that allows you to create projects containing the list of articles with the quantities to be produced and the list of plates to be used with the aim of minimize the material used and processing times Working field in X axis mm 4300 Working range in Y axis mm 2200 N ° 2 work fields Nesting work plan Automatic loading system with side lift table Panel detachment system with 2 suction cups Kwodpot Ul Dnjfx Ahvew N° 1 vertical 3-axis electrospindle, Kw 13.2, with automatic tool change, Hsk cone type Automatic tool change system with 16 positions - positioned on the rear of the machine BH 10 boring head with 10 spindles arranged as follows: - N ° 5 vertical in X axis - N° 5 verticals in Y axis Automatic unloading system with motorized belt Worktop cleaning system Printing and application system of adhesive labels with labeling machine, 22" monitor, keyboard and mouse with dedicated PC Protection and safety system with perimeter grids Safety system with bumper Automatic lubrication system Air conditioning system for cooling and cleaning the machine control N° 2 vacuum pumps 250 m3/h Installed power Kw 31

Condition: excellent (used), C.N.C. WORKING CENTER with 3 axes (X-Y-Z) - Goose-neck type Movable panel (workpiece), static working head, Horizontal position of the panel (workpiece) Numerical Control with Software BiesseWorks (Separate electric and command cabinet) Safety cabin (enclosure) of the working head, Front emergency carpets In-feeding working table (panel support) No. 2 Workpieces fixing clamps (for the panels introduction in the working area) Out-feeding table (with motorized belts) Kjdpfx Ajwb Allohveww Minimum workpieces dimensions (X - Y - Z) mm 90 x 70 x 8 (ca.) Maximum workpieces dimensions (X - Y - Z) mm 3000 x 1300 x 60 (ca.) Total installed power (Kw) 24 BOTTOM WORKING UNITS: Independent vertical boring spindles (No.) 29 Independent horizontal boring spindles (No.) 10 (8 X + 2 Y) Circular Grooving Saw (on X axis) dia. (mm) 160 (1 x kw 3,5 ca.) Vertical electro-spindle (No.) ISO 30 (1 x kw 4,5 ca.) TOP WORKING UNITS: Indipendent vertical drilling spindles (No.) 29 Indipendent horizontal drilling spindles (No.) 10 (8 X + 2 Y) Circular Grooving Saw (on X axis) dia. (mm) 160 (1 x kw 3,5 ca.) Vertical electro-spindle (No.) ISO 30 (1 x kw 4,5 ca.)

Condition: ready for operation (used), Technical characteristics En cours de vérification Nesting machining center with full table X axis travel: 4300 mm Y axis travel: 2205 mm Z axis travel: 326 mm Electrospindle 3-axis spindle, 12 kW HSK F63 chuck Revolver-type tool magazine, 8 tool holders BH17L drilling unit Vertical and horizontal drilling unit + grooving unit 10 vertical drill bits, 32 mm pitch (7 X-oriented and 3 Y-oriented) 6 horizontal drill bits, 32 mm pitch (2 X-oriented and 1 Y-oriented) 1 grooving blade, diameter 120 mm, for grooving in X (useful cut 25 mm) Kwodpfxjtqi Uys Ahvsw Independent Z drilling unit to optimize machining times 9-area vacuum table with MDF martyr panel Rear, front and side (left) reference stops 2 vacuum pumps 300 m3/h Controls : On Windows PC BiesseWorks Advanced software machine version Programming and optimization of drilling, cutting, milling, toolpaths and tool changes Customized parametric macros Network and/or USB file imports 3D part and toolpath simulator Parametric programming of the workpiece Martyr table surface program Collision management Tooling set and parametric cones supplied 2 BiesseWorks office version software keys supplied Power and Motors Voltage: 400 V Pluging: Three-phased Power: 33,4 Kw Overall dimensions Lenght: 8400 mm Width: 5800 mm Height: 2445 mm Weight: 3840 Kg

Condition: used, Year of construction: 2015, Numerical Control NC 1000 Software Biesse Works Working field in X axis 4300 mm Working field in Y axis 2205 mm FT nesting full plane worktable Automatic loading system with side lifting table Automatic labeling machine for barcode printing Automatic printing and application system of adhesive labels N ° 1 vertical electrospindle, with automatic tool change, HSK F63 Blade unit integrated in the drilling head on X axis - diam. 120 mm Blade unit integrated in the drilling head on Y axis - diam. 120 mm Automatic tool change system with 8 positions - positioned on the machine operating head Automatic tool change system with 21 positions - positioned on the rear of the machine with chain BH 20 boring head with independent spindles arranged as follows: - N ° 8 vertical in X axis - N ° 8 vertical in Y axis - N ° 4 horizontal in X axis - N ° 4 horizontal in Y axis Automatic unloading system with motorized belt Front protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the electrical panel Vacuum pumps Kedpfx Aswt Snyohvoww

Condition: used, Number of boring spindles 10 St. Kwodpfx Ajw H Iv Tohvow Working width 230 mm Working height 160 mm Feed motor 5,5 kW Feed speed 6-36 m/min.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Used BIESSE Rover A Kwedpfsxhcndex Ahvow - Nesting CNC - Year of manufacture: 2016 - Available from November 2025 - Additional photos and video available

Condition: used, Year of construction: 2016, Vitap Eclipse Edgebander for round shaped, curved workpieces Semi-automatic edge banding machine for large round or curved workpieces with a panel thickness between 10 and 60 mm and a belt thickness between 1 and 3 mm. Kwjdpfx Aowgb Hxehvow The 60 mm height is only possible with an edge banding thickness of 1 mm. If the edge band is thicker, it depends on the quality of the band and must be tested beforehand in connection with the cutting unit. Description; Two copy rollers for the shape of the workpiece to be scanned Gluing station Glue tray with a capacity of 1 kg Two 800W heating elements with electronic temperature display via the PLC Glue application via glue roller Glue tray made of aluminum for heat distribution Glue supply can be adjusted by means of a button Automatic cutting unit for edge banding material on the roll from 3 to 45 mm Aggregate is activated by a sensor for closed edge tape with a perfect connection or by an encoder if only 1 side is pasted Laser system for length determination, no pre-measurement necessary On-off capability for throughput Height-adjustable table for narrow panels On-off capability for milling aggregate Two copy rollers for the shape of the workpiece to be scanned Milling unit equipped with 2 x 0.5 kW (15000 rpm high frequency) with top, bottom and front copy rollers Milling unit equipped with blades R=2, Phase 15°, D=69, Z=6 Large panel turntable with vacuum to hold product (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland