Vertical lathe

BERTHIEZ TM500 SP

Condition: ready for operation (used), Year of construction: 1979, VTL BERTHIEZ (France) TM 500 SP Model: TM500 8P Year of Manufacture: 1979 Chuck diameter: 6300 mm Max. turning diameter: 15000 mm Max. workpiece height: 4000 mm Arm travel: 3600 mm Main motor power: 100 kW Max. workpiece weight: 80 tons Side tool post section: 360x360 mm Hsdpsx Dbydefx Aa Esnp Side tool post travel: 2500 mm Machine weight: approx. 230 tons Video available Milling and hobbing heads available

Condition: used, Year of construction: 1997, Technical details: max. module: 7 weight of the machine ca.: 5 t worm grinding diameter: 280-350 mm Hjdpfxjx Aq Egj Aa Eenp width of grinding worm: 84-104 mm min. number of teeth: 6 max. number of teeth: 600 max. top circle diameter: 360 mm max. workpiece weight: 60 kg without filter *

Year of construction: 1998, condition: good (used), Make: UNION Type: Ti 1800 Year: 1998 Specifications Metric US Standard Table Length 2000 mm Table Width 1800 mm Table load 16000 Movement V-axis 1250 mm Rotation B-Axis 360.000 ° Rotation speed B-Axis 1,35 Omw/min. Movement speed V-axis 4000 mm/min. Dimensions (Estimate) Hodpfx Aokwcdboa Eenp Length 3400 mm Width 2000 mm Height 920 mm Weight 6500 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1993, machine/vehicle number: 1590, Equipment: cabin, hydraulics, Zenith Machinenfabrik GMBH Neunkirchen/Siegerland GERMANY Used for production of concrete vibropressed pavement and borders. The machine is fully functional and it comes togheter with 2 mixers, bunkers for aggregates, skippers, packaging machine and 150 pallets for production. It also has included molds for different pavement models. Hnedpoucruujfx Aa Esp We also have to sale a Mobil Zenith 941 II A from 1978 which also has the identification plate attached. The machine is beeing sold because it was replaced with newer techonology.

Year of construction: 1993, condition: good (used), machine/vehicle number: 03.2370, Arthur Klink - internal broaching machine (WAG 748) machine type: internal vertical hydraulic broaching machine manufacturer: Arthur Klink type: RISZ 10 x 1000 built in: 1993 stroke: 1000mm pulling force: 10.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, magnetic chip conveyer remark: machine under power in stock Hnedocc D Ddspfx Aa Esp the machine has an automatic workpiece loading system for 2 workpieces, ideal useable for high production Optional accessories available on request: tools, workpiece holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke.

Condition: ready for operation (used), Year of construction: 1969, Centre height: 355 mm Centre distance: 3000 mm Max. swing diameter over bed/gap/cross slide: 715/790/520 mm Spindle bore: 86 mm Spindle mount according to DIN 55027: Size 11 Quill taper of tailstock: MK 5 21 spindle speeds: 5.6 - 560 rpm 42 feeds longitudinal/cross: 0.09 - 5.6/0.045 - 2.8 mm 22 Whitworth threads: 2 - 28 TPI 28 metric thread pitches: 1 - 14 mm Hsdpfxjxpuu Eo Aa Eenp 27 module thread pitches: 0.25 - 3.5 module 32 module threads: 4 - 56 module 32 diametral pitch threads: 8 - 112 DP Drive motor, pole-changeable: 380 V, 7/11 kW Weight approx.: 7 t Space requirement approx.: 6000 x 2300 mm

Condition: used, Radial drilling machine CSEPEL, Type RFh 75 / 1500 Machine no. 13704, Year of manufacture 1985 Drilling capacity in steel: Ø 75 mm Drilling capacity in cast iron: Ø 90 mm Spindle mount: MK 5 Nominal overhang: 1500 mm Maximum overhang of the spindle: 1500 mm (to the column) Minimum overhang of the spindle: 440 mm (to the column) Distance from spindle nose to clamping surface: 370 - 1700 mm Overarm vertical adjustment: 950 mm Table size / clamping surface: 1800 x 1100 mm Column diameter: 450 mm Quill stroke: 380 mm Spindle speed: 19-1900 rpm, 21 steps Feed rate: 0.047-2 mm/rev, 12 steps Motor power: 11 kW Mains connection: 380 Volts, 50 Hz, 15 kW - Right-hand and left-hand rotation of the drilling spindle via hand lever switch - Hydraulic gear change for spindle speed and feed rate - Hydro-mechanical central clamping device - Motorized overarm vertical adjustment Hsdpfx Aolhwr Rea Ejnp - Without coolant system - Machine light - Operating manual Space required: Length 2720 mm x Width 1170 mm x Height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons Good condition

Condition: good (used), Make: Ursviken Type: VPF 1000/800-5,0 Control: Siemens Simatic panel Year: 1970 Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal Build in height 2950 mm Maximum die height 1500 mm Movable Table & Piston in X-Ways Large package Die tooling radius 10/20/30/50/60/80/100 Pressing force 210 kg/cm2 Maximum stroke 800 mm Machine 2350 mm placed in ground Specifications Metric US Standard Capacity Kg 1000 Ton Distance between column Hodpfx Ajkvmi Sea Ejnp 5010 mm Table Length 3000 mm Table Width 2000 mm Table Height 550 mm Ram stroke 1450 mm Approche speed 50 mm/min. Working speed 5 mm/min. Return speed 50 mm/min. Dimensions (Estimate) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2000, x-travel 3500 mm y-travel 1600 mm z-travel 1200 mm Hnsdsykvayjpfx Aa Eop spindle turning speed range 250 - 3000 U/min tool taper ISO SK-50 tool change unit 40 rapid traverse: 15000 mm/min. feed 5000 mm/min table dimension - longitudinal 3860 mm table dimension - cross 1000 mm control HEIDENHAIN TNCi530 weight of the machine ca. 24 t dimensions of the machine ca. 8000 x 5000 x 4000 m

Condition: excellent (used), Year of construction: 2007, STAR ECAS 12 CNC Swiss-type lathe TECHNICAL DATA Maximum machining diameter: 13mm Max. headstock stroke: 205 mm Maximum drilling capability: Stationary tool: 10 mm Power driven tool: 8 mm Maximum tapping capability: Stationary tool: M8 x P 1.25 Hedpfx Aswf Acloa Esnp Power driven tool: M6 X P1.0 Maximum milling capability: 10mm Maximum die cutting capability: M8 x P1.25 Maximum slotting capability: 1.5 x 4 mm Feed rate: Z1, X1, Y1, Z2, X2, Z3, X3, Y3: 18,000 mm/min C1, C2: 194,400°/min Maximum turning feed rate: Z1, X1, Y1, Z2, X2, Z3, X3, Y3: 18,000 mm/min C1, C2: 194,400°/min Minimum input increment: X1, X2, X3: 0.001 mm Z1, Z2, Z3, Y1, Y3: 0.001 mm C1, C2: 0.001° Spindle speed: 12,000 rpm Indexing angle: 0.01° Dimensions: 2588 x 1150 x 1765 mm Center height: 1040 mm Weight: 3500 kg SCOPE OF OFFER INCLUDES (list not exhaustive): Star Ecas 12 CNC lathe Coolant tank / pump High-pressure system Transformer Operating documentation Exact scope of offer as shown in the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information.