Band Saw - Automatic - Horizontal
BERG & SCHMID GBS 255 VA-I MPS

Name: BERG & SCHMID GBS 255 VA-I MPS
Brand: BERG & SCHMID
Availability: InStock

Condition

New

Location

Germany

Band Saw - Automatic - Horizontal BERG & SCHMID GBS 255 VA-I MPS

Show map

Machine data

Machine type:: Band Saw - Automatic - Horizontal

Manufacturer:: BERG & SCHMID

Model:: GBS 255 VA-I MPS

Condition:: new

Price & Location

Location:: Deutschland

Call

Details about the offer

Listing ID:: A4005270

Reference number:: 1108-66217

Update:: 10.04.2026

Description

capacity 90 degrees: round 255 mm
capacity 90 degrees: square 240 mm
300 x 180
saw band length 2.765 x 27 x 0,9 mm mm
table height 870 mm
band speed 18 - 110 m/min
total power requirement 1,5/1,8 kW
weight of the machine ca. 0,63 t
dimensions of the machine ca. 1,8 x 1,85 x 1,85 m
Miter band saw, fully automatic GBS 250 Super VA-I MPS
• Miter left. 45° automatic operation
• Miter left. 60° semi-automatic operation
(cuts without programming)
• Shockproof and ergonomic control panel
with oil-proof EPDM cover a.
• Material height sensor c.
(Automatic cut start detection)
• Frame and gearbox made from one piece,
very quiet cutting and very low vibration
• Chip tray can be removed (disinfection)
• Easy access to the saw, material and feed unit
• Foldable safety cover
• Fine feed adjustment
• Semi-automatic. Cut!

Saw automatically with microprocessor control
Adjustable for 2 program levels
Dsdpfxod Iip As Acweur
Semi-automatic operation
Fully automatic operation
Start after entering the desired number and length: material cut-
Cutting execution and piece counting until the program is fulfilled
• MPS control for entering the desired number of feeds
• All important machine data is shown on the LED display during the
Cutting process displayed (power consumption, cutting time, number of pieces)
• The entered data is in RAM memory
• The autodiagnostic circuit automatically shows all irregularities
as an error message and checks the entire process
• Feed unit mounted floating.
• Length adjustment via handwheel and vernier with mechanical position
indicator.
Adjustable for section lengths from 2.5 mm to 420 mm or through
Automatic reversing can be repeated 1 - 29 times, remaining piece length 210
mm

Seller

Last online: A week ago

Registered since: 2003

776 listings online

Call

Send inquiry

Telephone & Fax

+49 2863 ... show

Fax:

These listings may also fit your interest.

Listing

5-axis Vertical Machining Centre Matsuura MX-330 PC10

Zevenbergen

18,629 km

5-axis Vertical Machining Centre
MatsuuraMX-330 PC10

Call

Condition: used, Year of construction: 2017, travel distance X-axis: 435 mm, travel distance Y-axis: 465 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 80 kg, total height: 2,755 mm, total length: 3,360 mm, total width: 3,870 mm, overall weight: 8,500 kg, spindle nose: MAS BBT 40, 5-axis Vertical Machining Centre CNC Control Matsuura G-Tech 31 i Table size ø 130 mm Table load 80 kg Number of pallets 10 max workpiece dia x height 330 x 300 mm Movement X-axis 435 mm Djdpfx Ajygw Dxecwjur Movement Y-axis 465 mm Movement Z-axis 560 mm C-axis (table rotation) 360° A-axis (table tilt) -125/+10° Spindle speed 50 - 15.000 R/min Spindle taper MAS BBT 40 Spindle motor 7,5/5,5 kW Magazin capacity 90 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

See details

Listing

Universal folding machine SCHRÖDER MAK II 3000-2

Rödermark

18,557 km

Universal folding machine
SCHRÖDERMAK II 3000-2

Call

Condition: good (used), Year of construction: 1999, machine/vehicle number: 190454, Offer 25290 Technical specifications: - Max. working width: 3040 mm - Max. material thickness at 40 kg / mm² strength: 2 mm - Preselectable bending angle: 6 – 135° - Maximum opening / stroke of the upper beam: 250 mm - Height adjustment: - of the bending beam: 50 mm - of the lower beam: 50 mm - Upper beam drive: 400 V / 0.37 kW - Bending beam drive: 400 V / 0.75 kW - Manual backgauge Dsdpfxow Sthdj Acwsur - Segmented gooseneck bending rail - Space requirement approx. W 4000 x H 1400 x D 1200 mm - Weight approx.: 3500 kg

See details

Listing

Multi-Tasking CNC Turning Center Spinner TTS65-Triplex

Germany

18,384 km

Multi-Tasking CNC Turning Center
SpinnerTTS65-Triplex

Call

Year of construction: 2019, condition: ready for operation (used), A simultaneous turning center Spinner with three turrets and extensive accessories, spare parts and tools is available. Travel X1/X2/X3: 180mm, travel Y1/Y2: +/-45mm, travel Z1/Z3: 704mm, travel Z2/E2: 620mm/720mm, rapid traverse X/Y/Z: 30m/min, acceleration: 0.5g. Spindle 1: Speed: 5000rpm, nose: A6, bore: 65mm, chuck diameter: 210mm, power: 18kW, torque: 115Nm. Spindle 2: Speed: 700rpm, nose diameter: 110mm, bore: 42mm, max. chuck diameter: 140mm, max. chuck jaw weight: 1.25kg, power: 16.6kW, torque: 100Nm. Turret 1/2/3: Turret stations: 3x12, speed: 8000rpm, tool holder: BMT 45, power: 4.3kW, torque: 13.6Nm. Machine dimensions X/Y/Z: approx. 2880mm/2130mm/1990mm, weight: approx. 7500kg, operating hours: 27102h, control: Fanuc 31i. Including loading magazine Top Automazioni, cooling/high pressure system with 80bar, chip conveyor, fire extinguishing system, a comprehensive tool package and other spare parts. Documentation available. On-site inspection is possible. Dedpjua E Trofx Acwour

See details

Listing

Bandsaw - Horizontal BERG & SCHMID K-tech DG 62/45 HA-I

Germany

18,384 km

Bandsaw - Horizontal
BERG & SCHMIDK-tech DG 62/45 HA-I

Call

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure Duedod Iipmopfx Acwsr regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

See details

Listing

Cold Circular Sawing - Automatic MEP TIGER 352 NC 5.0

Remseck am Neckar

18,601 km

Cold Circular Sawing - Automatic
MEPTIGER 352 NC 5.0

Call

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use Duedpjfg Rlcjfx Acwor of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces program.

See details

Listing

Plasma cutting machine Hypertherm** HT2000

Wiefelstede

18,341 km

Plasma cutting machine
Hypertherm**HT2000

€3,950

Fixed price plus VAT

Call

Listing

Sliding Table Saw CORMAK MJ45-KB4 (3200)

Siedlce

17,614 km

Sliding Table Saw
CORMAKMJ45-KB4 (3200)

€3,409

Fixed price plus VAT

Call

Condition: new, Year of construction: 2026, functionality: fully functional, A sliding table saw for working with high density boards, MDF boards, ABS and PVC panels, solid wood and other wood-based materials of similar structure and hardness. The saw is designed for small and medium carpentry work. Strong, professional sliding table saw with a movable table on bars and a separately powered scoring. Saw tilts in the 90–45 degrees range Solid, durable design ensures stability and work safety Controllable speed adjustment Technical data Table dimensions 970×550 mm Sliding table length 3200 mm Cutting width by the fence 1200 mm Transverse cutting by the transverse cutting guide 3100 mm Saw tilt 0°–45° Saw diameter Ø350 mm Saw hole diameter Ø30 mm Saw blade height 0–87 mm Saw blade 350 max height 105 mm Saw blade height at 45° angle 0–60 mm Saw blade 350 max height at 45° angle 73 mm Main saw spindle speed 4000 / 6000 rpm Scoring saw diameter Ø125 mm Scoring saw hole diameter Ø20 mm Scoring speed 8000 rpm Main motor power 5.5 kW Scoring motor power 0.75 kW Intake connector under table diameter 100 mm Intake connector diameter in the saw guard 80 mm Machine weight 680 kg Available equipment Duedpfxjtz Smio Acwer Cutting saw Scoring Transverse cut fence Longitudinal fence Modern - ergonomic saw guard Worktop extension Fence for mitre cutting Saw blade tilt gauge indicator User manual EC declaration of conformity

See details

Listing

Vertical machining center HERMLE C 1200 V

Mögglingen

18,561 km

Vertical machining center
HERMLEC 1200 V

Call

Listing

Band saw BERG+SCHMID GBS 218 Eco AutoCut

Waiblingen

18,599 km

Band saw
BERG+SCHMIDGBS 218 Eco AutoCut

Call

Condition: new, Year of construction: 2024, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID GBS 218 Eco AutoCut double mitre bandsaw Speed: 25-80 m/min - Mitre left 60° Dedpfx Acot I R Edewsur - For cutting steel, stainless steel and aluminum profiles - Quick-clamping vice with quick-clamping device a. - Built-in blade tension control b. - Saw blade guide made of carbide c. - Electric automatic cooling system - Machine base (supplied disassembled) The AutoCut system consists of: - Hydraulic cylinder, feed control, spring assembly, limit switch and enables three work sequences: 1. automatic lowering of the saw frame via hydraulic cylinder with infinitely adjustable feed control valve and limit switch at the end of the cut 2. high-speed lowering of the saw frame from the rest position up to the workpiece, then switching to normal saw feed 3. manual operation - hydraulic cylinder works as a brake cylinder Saw blade dimensions: 2455x27x0.9mm Further accessories such as saw bands, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

See details

Listing

Machining Center - Universal DMG MORI CMX 50 U

Germany

18,629 km

Machining Center - Universal
DMG MORICMX 50 U

Call

Condition: used, Year of construction: 2019, x-travel 500 mm y-travel 450 mm z-travel 400 mm control SlimLine Siemens turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm tool taper SK 40 table surface area 630 x 500 mm max. table load 200 kg Swivel range B: -5 / +110 ° rotation range C: 360 ° T-slots 7x 14 x 63 mm number of toolpositions 30 pos. max. tool weight 8,0 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. workpiece length 300 mm change-time tool to tool 2,7 sec change-time chip to chip 7,0 sec rapid traverse X/Y/Z: 30 m/min Feed force 4,5 kN feed speeds 1 - 30.000 mm/min total power requirement 30 kVA weight of the machine ca. 4,7 t dimensions of the machine ca. 4,5 x 3,5 x 3,2 m CNC - Milling Machine Universal DMG MORI - CMX 50 U - 5 Axis - swivable rotary table - Spindle-hrs.: only ca. 2264h - Power On Hours: ca. 6706h Dusdpoyw Titofx Acwor - incl. div. cutting inserts, milling cutters, mounting aids

See details

Advertise here