Rebar bending machine

Benelux Machines GW45

Condition: used, Technical details: bending angle max.: 0 - 225 ° working height: 850 mm operating voltage: 380 V bending angle max.: 0 - 225 ° number of bars max.: 15 mm diameter max.: 55 mm revolutions per minute: 5 -16 U/min total power requirement: 5,5 kW Weight approx.: 0,7 t dimension machine xH: 1,60 x 1,20 x 1,02 m Pjdpfx Agox Adbno Rogu Reinforcing Steel Bending Machine Perfekt 55 KA, PA, PLA — high-performance production machine. Thanks to the control system with four different bending speeds, the machine operates with exceptional efficiency. The bending angle is continuously adjustable from 0 to 225 degrees for left or right rotation. With its correction potentiometer for material spring-back compensation, the machine is ideal for medium and large-scale series production. Using the PA program control unit, up to eight different bending angles can be continuously pre-programmed from 0 to 225 degrees via rotary knobs. without accessories! *

Condition: new, *TECHNICAL SPECIFICATION: Heating power hot circuit: 48 kW heating capacity cold circuit: 12 kW cooling capacity hot circuit: 42 kW cooling capacity cold circuit: 270 kW medium: water up to 200°C Max. external volume: 10 ltr at 200°C Max. flow rate: up to 200 l/min  max. delivery pressure: up to 6,5 bar motor power: 5,5 kW Dimension LxWxH: 1.395 x 753 x 1.180 mm Weight approx. 580 kg *HIGHLIGHTS EQUIPMENT: -regulation and control via SPS with touch screen -heating via stainless steel tubular heating elements made of Incolloy -Heating control via solid-state relay -control box IP54 externally ventilated2 -electrical wiring on terminal blocks -pot. free input for signal for cold/warm changeover (front door) - Pot.-free contact for collective alarm on 3-pin plug-in connector (front door) (front door) -temperature control unit with heating and cooling circuit, for connection of a valve station for quick changeover between hot and cold circuit -temperature controlled feed of the return water -level monitoring with automatic level compensation -dirt filter in the cooling water supply and in the return of the circulation system -Separate automatic filling with strainer -Flow measurement in differential pressure principle in both circuits -monitoring of the heating rod surface by temperature sensors -System pressure control, necessary compressed air connection: 6 to 8 bar -booster pump type DS 360 for water make-up -corrosion-resistant components (VA, MS) Podpeg Ey Ufofx Ag Rsgu -unit mounted on rollers and ready for connection *OPTIONS: -System EcoTemp for intermittent operation -connection for ext temperature sensor PT100 or type J/K -Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. *This device is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, axle configuration: 6x6, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: semi-automatic, emission class: euro2, Year of construction: 2025, Equipment: air conditioning, differential lock, electric window regulation, onboard computer, = Additional Options and Accessories = - All-wheel drive - Heated mirrors - Leaf spring suspension - Differential lock - Air conditioning - Power Take-Off (PTO) = Notes = EUROMIX TO GO – immediately available new vehicles from the Porta Westfalica warehouse. Completely assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. MAN TGS 40.480 6x6 BB SA EURO 2 (220 tons) HEAVY DUTY TRACTOR Diesel engine MAN D2676 LF03, 353 kW (480 hp) power, 2,300 Nm torque, Euro 2 Podeyt Dd Sjpfx Ag Rjgu MAN TipMatic 12.28 OD Suspension: Leaf / Leaf Extended MAN TipMatic driving program, up to 90,000 kg, heavy-duty transport Front axle tires: Continental 14.00R20 HCS Terrain TL Rear axle tires: Continental 14.00R20 HCS Terrain TL Front axle, 9,000 kg, AP axle without through drive, straight, steered Rear axle, 16,000 kg, AP axle with through drive, straight Axle ratio, i=4.83 Air conditioning, Climatronic Professional instrument cluster, 12.3 inches Multi-function steering wheel, adjustable in height and inclination 1 bed, 70 mm mattress, with storage nets Cruise control (FGR - fixed speed limiter) Towing hitch on rear cross member, ROCKINGER SK5 Fifth wheel coupling JOST JSK 38 G 3.5 inches with cardan suspension Your advantages • Immediately ready for use: concrete pumps, concrete mixers, tippers, roll-off tippers • Chassis, body, and assembly from a single source • Fair prices • Financing in 19 European countries • Trade-in of your used vehicle Your contacts • Denis Omeragic: German, English, Bosnian, Croatian, Serbian • Henri Omeragic: (German, Bosnian, Croatian, Serbian) • Harun Cevik: (German, English, Turkish) • Jamila Azzi: (French, Arabic) • Olga Tissen: (German, Russian) • Karolina Cyburt: (Polish) EuromixMTP GmbH, Gänsekamp 7, 32457 Porta Westfalica = Further Information = Year of construction: 2025 Front axle: Differential lock; Steered Rear axle 1: Differential lock Rear axle 2: Differential lock GVW (Gross Vehicle Weight): 40,000 kg Price: On request Please contact Harun Cevik, Jamila Azzi, or Denis Omeragic for further information.

Condition: excellent (used), mileage: 440,000 km, power: 460 kW (625.43 HP), fuel type: diesel, tire size: 385/65R 22.5, axle configuration: 8x4, wheelbase: 5,250 mm, fuel: diesel, color: yellow, gearing type: automatic, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 9 kg, permissible axle load (axle 2): 8 kg, permissible axle load (axle 3): 13 kg, Year of construction: 2015, Equipment: AdBlue, Chassis number: WDB9634261L933624 Type: Trucks Year: 2015 Brand: Mercedes-Benz GVW: 41,000 kg GCW: 155,000 kg Emission standard: Euro 6 Mileage: 440,000 km Engine: EURO 6 / 15.6 L / 460 kW / 625 hp / 3000 Nm / Diesel / Inline 6 Transmission: Automatic Front axle: 9,000 kg / Steel suspension / Tires 385/65R22.5 Second axle: 8,000 kg / Air suspension / Tires 385/65R22.5 Third axle: 13,000 kg per axle / Steel suspension / Hub reduction / Tires 315/80R22.5 Fourth axle: 13,000 kg per axle / Steel suspension / Hub reduction / Tires 315/80R22.5 Wheelbase: 5,250 mm Cab: Large cab Cruise control 2 x bed Pull-out refrigerator Comfortable seats Storage boxes Radio CD player / Bluetooth Roof hatch Equipment: Jost JSK 38-C1 fifth wheel Fifth wheel on sliding frame Fuel tank AdBlue tank Orange warning lights Work lights Stainless steel tool boxes = Further information = General information Year of manufacture: 2015 Axle configuration Front axle: Tire size: 385/65R 22.5; Max. axle load: 9 kg; Steered; Suspension: Leaf spring suspension Rear axle 1: Tire size: 385/65R 22.5; Max. axle load: 8 kg; Suspension: Air suspension Rear axle 2: Tire size: 315/80R22.5; Twin tires; Max. axle load: 13 kg; Reduction: External planetary axles; Suspension: Leaf spring suspension Pgodpfx Agoxannas Reu Rear axle 3: Tire size: 315/80R22.5; Twin tires; Max. axle load: 13 kg; Reduction: External planetary axles; Suspension: Leaf spring suspension Weights Payload: 155,000 kg GVW: 41,000 kg Condition Technical condition: very good Optical condition: very good Financial information Price: On request

Condition: good (used), Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump -Manufacturer: Siemens Hinsch, side channel pump type CEHF 3104 -Motor: AEG 22 kW / 2915 rpm Pedpfxohn S Slj Ag Rjgu -Dimensions: 1680/800/H990 mm -Weight: 394 kg

Year of construction: 2013, condition: like new (used), Name: Plowshare mixer / Oblique paddle mixer Manufacturer: MAP Pgedpfx Agsn Ur S Ue Rsu Type: WBHP 15000 Year built: 2013 Hours of operation: Zero Material: Mild steel S235J Driving force: Here you can choose between 160 kW, 200 kW and 250 kW Description: Single shaft horizontal mixer Model: Batch mixer Usable volume: 4.500 - 10.500 liters Equipment Tools: Plowshares (screwed) Dimensions: L 6124 mm x W 2800 mm x H 2525 mm Empty weight: Weight 8000 kg Technical doc.: Yes Message: Since the tools are screwed, it can be used both as a plowshare mixer and as an inclined shovel mixer. This horizontal mixer is a customer return without operating hours. The mixer is completely overhauled before delivery Condition: New and workshop revised Price: On demand

Condition: new, Year of construction: 2025, The DURMA AD-S 611600 is a powerful hydraulic press brake that ensures the highest precision and efficiency in sheet metal processing. With a pressing force of 1600 tons and a working length of 6 meters, it is ideal for demanding applications, especially when processing large and thick materials. Technical details: - Model: DURMA AD-S 611600 - Pressing force: 1600 tons - Working length: 6 meters - Condition: As good as new, available immediately Features and advantages: - High bending accuracy thanks to the latest CNC control - Robust construction for a long service life - Flexibility thanks to the backgauge control - Support for heavy and large sheets thanks to the integrated bending aid The machine is available immediately and can be inspected on request. We are happy to provide you with further information or to arrange an appointment. Pedpfx Asvy Srasg Rogu

Condition: used, Year of construction: 2013, functionality: fully functional, HD-X 918 – HBP 410/923G: complete, state-of-the-art, CNC-controlled system for efficient and rapid fabrication by drilling and sawing of almost all types of structural sections and flat bars. Pgodpfx Agjw Hf T Ne Rsu

Year of construction: 2011, condition: good (used), Plant: PEMO pump, sludge pump, chamber filter press feeding pump Type: S-ATMAO/AB/DCB75 Series: AO/AB Year of construction: 2011 HP: 22/50 Engine: Cantoni Power: 37kW Pgjdpoi Ezhbofx Ag Rju Speed: 2951 rpm Machine number: 3102 Dimensions: L 1200mm Application: Designed for very abrasive and/or acidic slurry applications. Delivery volume: from 1 to 1500 m3/h / depending on the medium

Year of construction: 2023, condition: new, SEMIX Compact type concrete batching plants are designed for limited spaces and transportation easiness for overseas countries. SEMIX Compact 60 can fit on a two container and assembled in 3 days completely. SEMIX Compact 60 is equipped with 1500/1000 liters capacity Concrete mixers which can be a single shaft or planetary type mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. All SEMIX Aggregate Storage hoppers are bent trapezoidal shape for having an extra strength. The robust steel structure maintains long-life performance. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer mechanism. SEMIX Compact Concrete Batching Plants offers variety in aggregate transfer mechanism. Even in compact batching plants, users can choose either skip hoist mechanism or transfer conveyor for aggregate transfer. Pgjdpfxjga D Tre Ag Rou All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate their CRM system. SEMIX's engineering team can int