Center lathe

BEHRINGER

Condition: excellent (used), Year of construction: 2022, Available immediately. Behringer LPS 60 TA, manufactured in 2022, in excellent condition. This is a very special band saw; it operates fully automatically! - Auto feed control with cut monitoring - Saw band drive 5.5 KW - 10-120 M/min Itodpfszubxhjx Abnek - 54 mm band - Clamping device for saw sections - Line laser Advantages of the LPS-TA table band saw Unsurpassed precision and cutting performance High cutting accuracy, smooth running, and long band life are due to the special, torsion-resistant design of the saw frame. Unique feature: the force transmission of the saw feed is located directly below the cutting point. Advantages in material procurement By producing flat materials from large sheets, efficiency gains can be achieved in both storage and the purchase of raw materials. Clamping device for layered cuts (option) For sawing larger batch sizes, sheets can be stacked in layers and securely held in place using the optional vertical additional clamping device. Chip conveyor as standard Below the saw unit, directly in the direction of chip flow, there is a large-sized chip conveyor with an integrated coolant tank. Chips and coolant are collected and separated in this tank. For cleaning and maintenance work, the conveyor can be extended out of the machine frame. Powered duplex chip brushes effectively clean the saw band, thereby increasing tool life. The brushes are automatically adjusted to the saw band and ensure consistent cleaning performance. Automatic feed device Through the combination of an NC-controlled feed device and intelligent control, sheets can be separated into strips fully automatically. Servo feed system The use of the Behringer servo feed system creates a constant chip removal rate and utilizes the performance of modern saw bands more effectively. The rapid response of the servo feed system to the sensors of the cutting pressure control consistently prevents overloading and premature wear of the saw bands. Quick saw band change ensures the shortest possible setup times. In just two to three steps, the saw band can be moved to the change position. Band-guiding parts made of gray cast iron are made by Behringer and ensure vibration damping directly at the cutting point, thereby increasing tool life. Compact Due to its compact dimensions, the table band saw can be installed even in confined spaces. Movable material support table For easy loading and unloading by crane, the material table can be extended out from under the saw unit.

Condition: good (used), functionality: fully functional, Type: SUPER 215 PU Technical data: Cutting range: Itedpfszfy Rdex Abnjk Circular: 215 mm Flat: 210 x 180 mm 4 speeds Blade length: 350 x 30 x 2 mm

Condition: used, Year of construction: 2008, functionality: fully functional, operating hours: 7,800 h, Behringer HBP 263 AG fully automatic metal band saw with miter function Manufacturer: Behringer Type: HBP 263 AG Year of manufacture: 2008 Condition: used, ready for demonstration under power, video available Operating hours: Sawing hours: 16,028h Delivery scope: 7,785h Itedpfx Abjztykyenok - Documentation - Minimum quantity lubrication Availability: While supplies last, subject to prior sale.

Condition: used, Year of construction: 2020, machine/vehicle number: 0102-260026, The Behringer SLB 230DG-HA is a semi-automatic hydraulic double-miter band saw designed for the precise cutting of profiles, tubes, and solid material. With miter adjustment up to 45° to the left and right, it is suitable for both straight cuts and angle cuts in metal fabrication and mechanical engineering. The cutting range is up to Ø 240 mm, 240 × 240 mm for square stock, and 310 × 200 mm for flat material. The continuously adjustable cutting speed from 16 to 120 m/min allows for optimal adaptation to various materials. The machine features a 1.1-kW drive, a saw blade measuring 2,700 × 27 × 0.9 mm, and weighs approximately 490 kg. It stands out for its robust construction, ease of operation, and high cutting precision. Technical Specifications Model Semi-automatic hydraulic double-miter band saw Cutting range (round) Ø 240 mm Cutting range (square) 240 × 240 mm Flat cutting range: 310 × 200 mm / 270 × 240 mm Mitre range: 45° left/right, 30° right Isdpfjztwdwjx Abnstk Cutting speed: 16–120 m/min Drive power 1.1 kW Saw blade dimensions 2,700 × 27 × 0.9 mm Machine weight approx. 490 kg

Year of construction: 1999, condition: ready for operation (used), Three smaller metalworking machines are available. 1) Behringer HBP-340 band saw, year of manufacture: 1984, max. round material cutting capacity: 340mm, max. square material cutting capacity: 340mm/340mm, miter range: +/-45°, cutting speed: 100m/min, machine dimensions X/Y/Z: approx. 3100mm/1100mm/1700mm, weight: approx. 2000kg. 2) Löser SO 0337 belt grinder attachment, year of manufacture: 1999. 3) Knoll PF 70/180 belt filter system with filter fleece, year of manufacture: 1999, filter capacity per minute emulsion/oil: approx. 70l/50l, fleece width: approx. 540mm, tank volume: approx. 280l, machine dimensions X/Y/Z: approx. 1700mm/1200mm/750mm, weight: approx. 200kg. An on-site inspection is possible. Ijdpfoyypl Nox Abnstk

Condition: used, Year of construction: 2007, saw blade diameter 370 mm capacity 90 degrees: flat 200x100 mm capacity 90 degrees: round 130 mm 34/68 UpM Ijdozr Rqbspfx Abnetk total power requirement 2,6 kW height of material-table 900 mm dimensions of the machine ca. 1335x865x2175 m weight of the machine ca. 430 kg

Condition: excellent (used), Year of construction: 2017, operating hours: 818 h, Behringer HBE 321 A Dynamic, manufactured in 2017 – low operating hours, more information to follow. The machine is currently being delivered. Ijdozrgn Nepfx Abnjtk - The photos show the original condition.

Condition: used, Saw BEHRINGER HBE321 A Dynamic Itsdpfxox Tvkxs Abnek

Condition: used, Year of construction: 1998, machine/vehicle number: 0102-260022, The Behringer HBP 430N is a horizontal, double-column bandsaw designed for professional use in metalworking. It is suitable for precisely cutting solid materials, pipes, and profiles and impresses with its robust construction and high cutting accuracy. The machine is designed for straight cuts; depending on the configuration, miter cuts up to 45° are also possible. With a cutting range of Ø 430 mm or 600 × 430 mm and a continuously variable cutting speed of 17 to 110 m/min, it can be used in a variety of applications. The powerful 7.5 kW sawing motor, hydraulic workpiece clamping, and coolant system with 150 liters ensure reliable and economical operation. With a machine weight of 2,100 kg, the HBP 430N offers high stability and is ideal for daily use in metalworking, steel construction, and mechanical engineering companies. Technical Data HBP 430 N Working range 90° round Ø 430 mm Working range 90° flat 600 × 430 mm Itsdpfx Aezq S Ncjbnjk Working range 45° flat 320 × 430 mm Smallest material dimension 15 mm / 10 × 15 mm Smallest section length 10 mm Remaining piece length approx. 40 mm Cutting speed 17–110 m/min Coolant tank 150 l Belt tension 80 bar Sawing motor 7.5 kW Hydraulic motor 2.2 kW Coolant pump 0.12 kW Chip conveyor 0.09 kW Connected load approx. 11 kW Mains connection 400 V / 50 Hz Control voltage 24 V DC Current consumption approx. 22 A Fuse 35 A Cable cross-section min. 4 × 6 mm² Saw band dimension 5,800 × 54 × 1.3 mm Machine weight 2,100 kg Material support height 700 mm

Condition: used, Year of construction: 2005, machine/vehicle number: 0102-260023, The Behringer HBP 313 is a horizontal, double-column band saw for industrial metalworking. It is used for the precise cutting of solid materials, tubes, and profiles. Its robust design and continuously adjustable cutting speed make it suitable for both single-piece and series production. The machine has a working area of Ø 310 mm for round materials and 500 × 300 mm for flat materials. The cutting speed is continuously adjustable from 20 to 140 m/min. A coolant system with a 60-liter capacity and a band tension of 60 bar ensure high cutting quality and a long service life of the saw blade. The machine is powered by a 4.0 kW sawing motor. The electrical connection is 400 V / 50 Hz, and the control system operates with 24 V DC. With a weight of 1,960 kg, the HBP 313 ensures low-vibration operation and high processing accuracy. Technical data Working area Ø 310 mm / 500 × 300 mm Smallest material dimensions Ø 10 mm / 10 × 8 mm Smallest section length 8 mm Isdpfozq S Iljx Abnotk Remaining piece length from 10 mm Cutting speed 20–140 m/min Coolant 60 l Band tension 60 bar Sawing motor 4.0 kW Hydraulic motor 1.5 kW Coolant pump 0.12 kW Chip conveyor 0.09 kW Connected load approx. 7 kW Mains connection 400 V / 50 Hz Control voltage 24 V DC Current consumption approx. 14 A Fuse rating 25 A Machine weight 1,960 kg Material support height 800 mm