Root end reducer

Baljer und Zembrof WRP SO

Condition: used, A.COSTA LEOPARD multirip saw with double arbor - Max cutting depth: 200 mm Ncsdovf Dagjpfx Ad Njl - Width of track: 350 mm - 2 x 55 KW / 75 HP - Weight: around 5 tons

Condition: excellent (used), Year of construction: 2009, CNC for complete processing of door frames / jambs , either or adjustable door frames in DIN norm Working width max 3.000 mm Working width min 480 mm Workpiece thickness max 98 mm Workpiece width max 280 mm Aggregates per side 2 Saw aggregates per side 1 diam. 400 mm Drilling supports per side 1 Drills per side 5 Aggregates longside 1 Milling aggregate with 2 spindles Njdpfx Asw Sd Uued Necl Aggregate tiltable in angle 45° Angle adjustment - programmable controller Width adjustment - programmable controller Conformity marking - CE mark Weight 2.500 kg

Condition: excellent (used), We offer for sale the following Gránit-Mill 90 wood pelletizing presses, in the condition shown in the pictures, after the pelletizing plant has ceased operation. The machine is made in Hungary, our company has an excellent relationship with the manufacturer, and we can help you purchase parts. Drive and sticker handling is similar to the old CPM machines. The presses (with pine) are capable of 1.2-1.5 t/h/pc. Ncjdpfx Adsp T Twuo Nsl Price: €29 900/press €49 900/ 2 presses Included in the price: pre-tank control cabinet dosing screw permanent magnet conditioner press motors pre-tank 1.1 kW feeder 1.5 kW conditioner 15 kW tablecloth 0.55 kW main engine 90 kW 3 stickers all three are made by La Meccanica barely used It has a 6 x 45 mm hole for pine 2 sets (total of 4) notched collars spare parts screws nuts breaker pin assembly aids Status: Engines and drives intact. Both machines tested. It is recommended to replace the neck bearing of the right machine. Smaller parts (such as the pellet cutter) must be replaced. There is no water supply, the place is prepared. The greasing method is manual, but central greasing can be easily installed. Summary: The machine on the left can be put into production immediately. It requires a minor service on the right side. If necessary, the machine can be tested at a pre-arranged time. Not in production, must be prepared. It is possible to check the mechanical durability and volume density of the produced pellets on site!

Condition: excellent (used), Year of construction: 2012, Set for finger jointing in medium and mass production. The machine is technically efficient and in good condition. Several sets of tools are included. Characteristic: – industrial set with one tenoning machine. Loading the package under the supervision of the operator enables the processing of inferior raw material, – sensitivity controlled by microprocessors /automatic control/, – turning the package after 1 treatment on the turntable (sharp connection) or turning the package on the back (furniture joint with a line; unique GOMA solution), – the set includes an automatic station for loading the press, – the possibility of using cuts on the press, Tenoner with feed table Data Values Ncedpfx Adolu D Tfo Nel Milling spindle fi 50x210 mm Spindle speed 6000 rpm 18.5 kW motor Tool dimensions fi 250x160 mm The saw spindle aligns the face Special chipper fi 300x8 mm 6 kW / 3000 rpm motor Stepless feed table Working width x working height 600 x 30-160 mm Glue nozzle outline by tool PRESS FC-10 PZ6/2 Data Values Board width 30-160 mm Jufefe Board thickness 20-70 mm The length of the finished board is 6000 mm Pressing force 3 - 7.5 - 10 T Hydraulic power pack 3 kW / 140 bar

Condition: excellent (used), Buderus Logano SK735-830Kw 6Bar,also available with1200,1400kw Nodpfx Ajhtf Dksd Nscl

Year of construction: 2024, condition: new, Overview - of the different variants *Not every position is required: Optional: -Bale shredder MHB from 24.990 € net Ncjdpfoff Sbiex Ad Nel -MHZ straw mill from € 7,980 net -Special hopper 970 € net -Cyclone from € 3,750 net -Sheet metal silo demonstrator with discharge (only sketched in the picture) *optional, if you want to load with the wheel loader Unit price net from € 14,750 - Demonstrator -Dedusting auger - length approx. 4 m 4 sieves are mounted on the underside, which are extracted. Unit price net from: 9.750 € - Extraction parts / hoses flat rate 945 € net - Complete control system Net unit price: € 2,750 -Demonstrator extraction unit MMJET 160 Demonstrator, with cleaning Connection 160, fan 2,2kw air capacity 1850m³ /400 V Automatic compressed air cleaning Unit price net from: 6.950 € -Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with + - 20 kg from 59.995 € net *A reference system (baler) is located in zip code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height can be adjusted on request) Bale weight +/- 20 KG (depending on material) Capacity: approx. 30 bales per hour Storage container approx. 0.7m³ capacity Filling level sensors for min./max. filling level in the container Hydraulic pre-compressor Hydraulic compression ram Hydraulic unit, valve block with oil tank Pump 18.5 KW / 50 liters Rollers in the bale chamber for easy bale push-off Dimensions (l x w x h) 3105x2830x2455 mm Weight approx. 1500 KG mütek baling presses / wrapping machines are designed for the production of bales from a wide variety of materials such as shredded micanthus or elephant grass, wood chips, sawdust and shredded straw. straw. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. quality in continuous operation. The baler compacts the material filled into the storage container without the addition of binding agents and packs the material into plastic bags. The volume of the material can be considerably with the baling press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18 % Atro. The container of the mütek baler can be fed automatically or manually and has a volume of approx. 0.7 m³. volume of approx. 0.7 m³. Containers with a larger volume or with an attached suction and filter system as a complete disposal unit are also available. In addition to automatic filling via deduster, mütek also offers filling by means of screw conveyors. With both variants, automatic automatic dedusting is possible. mütek baling presses are equipped with a control cabinet for the control system. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adapted to your requirements on request. The following advantages arise in the production of bales: - simple and safe storage - No loose dust - Minimization of the storage volume - Low transport volume *Requirements for source material: - dry (max. 30 % ATRO) - Maximum length 35 mm

Year of construction: 1995, condition: used, machine/vehicle number: LWT , Tank-& Umweltschutz Wozniack Specialist company according to the Water Resources Act Dear Sir or Madam, we offer a 20,000 liter storage tank for the storage of water and wastewater as follows . This is a 30 cbm storage tank made of steel. Material S235JRG2 steel . Incl manufacturer certificate DIN and nameplate. The tank is cleaned from the inside and bitumen insulated from the outside. Suitable for underground as well as above ground storage. Tank dimensions : Ncodpjc Nkyvefx Ad Nsl Length : approx. 6.400 mm Diameter : approx. 2.000 mm Weight : approx. 4.000 kg Shape : cylindrical Equipment : on request For the use as extinguishing water tank additionally a suction line with A-fixed coupling according to DIN can be offered. Of course, you can also co-design your tank system! All our plants are extensively controlled and checked in our company by selected employees. We also offer an inexpensive delivery on request. The inspection of our plants is possible at any time. Further tank plants for above ground as well as underground storage are available in all sizes and are for sale on our premises. and are available for sale on our premises. Could we convince you of our offer? If you have any questions or requests, just call, one of our experienced staff will be happy to advise you. General: All offers are valid ex location Warstein , free loaded. Delivery can be offered at a reasonable price for an additional charge. Delivery time = immediately You will receive an invoice with VAT. In addition, we buy existing tank installations and can, as an approved specialist company according to the Water Resources Act (WHG) we can professionally empty, clean, dismantle and transport them away. With kind regards from Warstein Tank and environmental protection Wozniack Enkerbruch 2 59581 Warstein

Condition: good (used), Year of construction: 1998, Skid-mounted nailing machine P + K Pallet nailing machine P+K SNM-III-24-1250 Intermediate drive with branding punch Positioning table Portal stacker Pallet size 600x800 - 1200x1400 mm Ncodpfjuzh Anjx Ad Nol

Condition: used, Year of construction: 1988, functionality: unexamined, available Berstorff Mill 400 x 900mm Nsdpfsr A Dfysx Ad Nocl more details in attached description!

Condition: new, functionality: fully functional, Year of construction: 2025, color: black, overall weight: 1,600 kg, empty load weight: 1,600 kg, loading space width: 2,400 mm, loading space length: 6,000 mm, loading space height: 2,500 mm, machine/vehicle number: Bürocontainer BLACK, Office Container | Living Container | Construction Container | Model BLACK | 240cm x 600cm | High-Quality and Flexible Solution Available products can be inspected and picked up directly from our warehouse. Our office and living containers provide an excellent solution for a wide range of applications. They stand out with outstanding quality, maximum flexibility, and short delivery times. Technical Details Dimensions: •⁠ ⁠Width: 240 cm •⁠ ⁠Length: 600 cm •⁠ ⁠Height: 250 cm Insulation •⁠ ⁠Ceiling/Walls: 50mm PUR (Polyurethane) •⁠ ⁠Optional: 100mm insulation available with PUR, PIR, or Rock Wool •⁠ ⁠Floor: 16mm fiber cement board + PVC covering High-quality workmanship ensures long-term durability. Ncjdpfovv Nqxjx Ad Nsl Equipment: •⁠ ⁠1x Room •⁠ ⁠1x External Door •⁠ ⁠2x Windows with Shutters •⁠ ⁠2x LED Interior Lights •⁠ ⁠2x Interior Power Outlets Colors: •⁠ ⁠Facade Color: RAL 7016 •⁠ ⁠Frame Color: RAL 7016 •⁠ ⁠Customization: Individual design adjustments possible according to customer preferences Stock & Delivery: •⁠ ⁠In Stock: Shipping on the same day •⁠ ⁠Out of Stock: Production time depending on the model, approximately 2 to 4 weeks •⁠ ⁠Worldwide Shipping: We offer professional shipping services to ensure fast and reliable delivery to any country. Custom Sizes: Products can be manufactured according to the customer’s specific requirements. Showroom Address: Im Mannenberg 9a, 53557 Bad Hönningen, Germany For further information or customized solutions, please feel free to contact us!