Table mill

BÄUERLE SFM 200

Condition: used, Year of construction: 1987, Used machine Year of manufacture: 1987 Lasdpfxjz Dcp Ds Abzeg Condition: completely inspected by the workshop Table size 2000 x 880 mm (entire table in a cast construction) with extendable frame support Drive motor with pole change, 5/6 kW Spindle speeds 3000/4500/6000/9000 rpm Vertical adjustment of the milling spindle 110 mm Swivel angle of the milling spindle 45° with Holz Her 3-roller feed mechanism Pictures show the machine in a condition prior to refurbishment. Availability: approximately 3-4 weeks after order receipt Location: Flörsheim

Condition: used, fuel type: diesel, Year of construction: 2010, operating hours: 7,796 h, Please contact Kristoff Van Havere for more information - Hydraulic quick hitch CW10 - 2 buckets Lodpfsztuutjx Abzoag - Auxiliary piping for hammer and sorting grab

Condition: new, Year of construction: 2026, For professional and precise glue supply in dowel holes and back side grooves. Lajdpfx Abodxz Tpszjg Short introduction: • Always the same and right glue amount • No afterwards cleaning of the workpieces of too much glue is necessary • Easiest and minimal cleaning (1x week) of the gluing system (through cleaning program) • Glue cost savings • Ergonomic and light glue gun compared to squeezy glue bottles • Faster and more precise working compared to squeezy glue bottles

Condition: good (used), functionality: fully functional, Sheet width: 4050 mm Sheet thickness: 8 mm Cutting angle: 2 - 10° Laedpfxsxu Nc Ie Abzjg Cutting speed: 0.053 m/s Table length: 710 mm Machine weight approx.: 10,100 kg

Condition: new, Technical data: Max saw diameter: 400 mm Min saw diameter: 250 mm Saw spindle diameter: 30 mm Scorer diameter: 120 mm Scorer spindle diameter: 20 mm Scorer on a separate engine Manual saw height adjustment Tilting saw at an angle from 0° to 45° Manual adjustment of the saw angle Carriage length: 3200 mm Carriage lock Work table: 1450 mm x 1030 mm Table height: 920 mm Table extensions 2 x Culaga Guard Safety switch Power supply: 380 V Main engine power: 7 kW Overall dimensions: Lsdpfx Ajv S Uz Isbzsag Length: 3430 mm Width: 1900 mm Height: 1560mm

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine Laodpeh Nvyzjfx Abzog -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Year of construction: 2004, condition: excellent (used), Four-side planer Lsdpfx Abjhlp D Njzjag -max. planing width 23cm -max planing height 16cm -2 pulling rollers in the table -chromed table - smooth regulation of the feed speed -2 pulleys from the top in front of the lower head, additionally a roller apparatus for short elements - 4 spindles: lower 5.5kW, right 5.5kW, left 5.5kW, upper 7.5kw The machine is in very good condition, little used, with spiral heads on the bottom right and left, with a Terssa knife head on the top.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x2070x1135 mm Laedpfxevz E Sio Abzeg Weight 320 kg Total power requirement 2,2 kw

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints Laedpeiidm Nofx Abzeg - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: reconditioned (used), functionality: fully functional, conveyor belt width: 615 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 07/2027, electrical fuse: 16 A, opening width: 30 mm, working width: 615 mm, type of input current: three-phase, Fritsch Rollfix 5/630 Comfort Dough Sheeter For all types of dough, for sheeting and laminating Lodpfxsyw El To Abzoag Manual operation Robust design Stainless steel construction Mobile dough sheeter With hand and foot controls Connection: 400V, 16A CEE plug Used machine, refurbished Optional: Maintenance contract Spare parts box Service package Delivery service Training and commissioning