Press brake

ATLANTIC HPE 40400

Condition: defective spare-parts repository (used), Year of construction: 1997, machine/vehicle number: 885258, Defective hydraulic CNC press brake Hodpfxex Ew Dqo Apdsw Offer 25514 Technical data: - max. working length 3060 mm - distance between uprights 2690 mm - max. pressing force 1300 kN - max. distance table / ram 370 mm - upright overhang 410 mm - ram stroke 215 mm - stroke speeds - downward speed, no load max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to 11 mm/sec - total drive power 18 kW - pneumatic connection 6 bar - space requirement approx. W 3800 x H 2400 x D 2400 mm - weight approx. 11500 kg - includes: - with 6-axis CNC control DELEM - two-hand control panel with foot switch - crowning device - controlled back gauge with height adjustment 5 - 860 mm - hydraulic upper and lower tool clamping - die table movement pneumatically assisted - Machine does not reference because 2 axes on the right side of the back gauge are not functioning; control module may be defective.

Condition: used, Technical details: bending angle max.: 0 - 225 ° working height: 850 mm operating voltage: 380 V bending angle max.: 0 - 225 ° number of bars max.: 15 mm diameter max.: 55 mm revolutions per minute: 5 -16 U/min total power requirement: 5,5 kW Weight approx.: 0,7 t dimension machine xH: 1,60 x 1,20 x 1,02 m Reinforcing Steel Bending Machine Perfekt 55 KA, PA, PLA — high-performance production machine. Thanks to the control system with four different bending speeds, the machine operates with exceptional efficiency. The bending angle is continuously adjustable from 0 to 225 degrees for left or right rotation. With its correction potentiometer for material spring-back compensation, the machine is ideal for medium and large-scale series production. Using the PA program control unit, up to eight different bending angles can be continuously pre-programmed from 0 to 225 degrees via rotary knobs. without accessories! Hjdpfxox Adbnj Apdow *

Condition: new, Year of construction: 2024, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, total length: 7,600 mm, total height: 3,000 mm, total width: 2,650 mm, overall weight: 14,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 4,000 rpm, DYAS 3 BDC CNC Beam Profile Machining Center Operating Range for Section Min. 200 x 80 mm / Max. 1200 x 500 m Hodogbdpkopfx Apdsw Operating Range for Length Min. 2000 mm / Max. 12000 mm (Gross: 12500 mm ) Drilling Head (Spindle) 3 Spindle Speed 50-4000 (stepless) rpm Spindle Power 22 Kw Spindle Torque 280 Nm Tool Changer 6 for each spindle , total 18 Tapping Capacity M10-M30 Bandsaw (Optional) Cutting Speed 20-100 m/min / Mitering Angle +60°/-45°

Condition: as good as new (ex-display), Year of construction: 2023, Container rotating device, 10-ton lifting capacity Speed: continuously adjustable Hand and foot remote control Diameter: 320mm to 2800mm Roller diameter: 300mm Hodped Nmx Tefx Apdow Speed: 6 - 60 m/h Power: 2 x 0.55 kW

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, number of chambers: 1, actuation type: electric, Equipment: CE marking, documentation/manual, In-stock item, available for immediate delivery -Tmax 1350°C -Usable space LxWxH (mm) 600 x 500 x 500 -Batch weight 300 kg -Normal operating pressure 10⁻³ mbar -max. cooling gas pressure 6 bar abs. -External dimensions LxWxH (mm) 4200 x 2500 x 3500 -Space requirement LxWxH (mm) 5000 x 5000 x 4000 -Weight (net) 13000 kg -Total connected load 125 kVA -Connection voltage 400 V -Current fuse 250 A -Control system: Stange SE 607 -Documentation Included: -Protective gas buffer tank -Vacuum pump stand -4-flap design for cooling, allowing the flow direction of the gas flow to be adjusted horizontally or vertically. -Option for liquid nitrogen connection, enabling cooling to -80 °C inside the furnace. -Internal insulation made of graphite hard felt, protected and reinforced with CFC. Hsdpfxszr U Anj Apdsw You can find the detailed description as a PDF in the advertisement! We offer new and used industrial furnaces. Inspections in our warehouse are available upon request! Industrial furnace, vacuum furnace, vacuum furnaces, vacuum hardening furnace, hardening furnaces, sintering furnace, sintering furnaces.

Condition: good (used), functionality: fully functional, Year of construction: 1998, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: Simatic OP7, number of rollers: 4, roller (bottom) diameter: 470 mm, roller (top) diameter: 530 mm, side roll diameter: 400 mm, roller diameter: 530 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 2,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 65 mm, sheet thickness stainless steel (max.): 50 mm, overall weight: 40,000 kg, total length: 6,000 mm, total width: 2,900 mm, total height: 2,900 mm, power: 55 kW (74.78 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, plate bending roll capacity 3000x50 mm Davi modelMCB3053 Hydraulic 4 roll plate bending machine, year 1998 plate width 3000 mm thickness rolling 50 mm pre-bending 40 mm width on the rolls 3100 mm upper roll size 530 mm lower roll 470 mm side rolls 400 mm Power electric 70Hp on hydraulic unit voltage 380/50 - Installed configuration Hardened surface of the 4 rolls conical bending attachment – hardened cone bending Hedpfx Aoy D Ngzspdjw Console electric with digital position readout of the rolls Controller Siemens Simatic OP7 NC programmer for automatic rolling Hydraulic power driven the central rolls with axial gearbox Pre-pinch pressure adjustable plate edge pre-bend. Drop-end open front for unloading closed shells Rerolling system for calibration roundness of welded shells. Safety and emergency system installed. Manuals original for operation and maintenance Dimension 6000x2900 x h 2900 mm weight 40000 kg

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Hodpfouiy Ngox Apdew Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Pre-loading magazine for gentle handling of painted/anodized surfaces Offcut ejector in the pusher Foldable offcut tray Optional: Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Online support connection Delivery and installation on your premises Training of your employees

Condition: used, TECHNICAL DETAILS - maxi bar diameter : 12.7 [mm] - main headstock strokes (fixed/rotary sleeve) : 130/80 [mm] - spindle power : 4 [kW] - rotation speed : 12 000 [rpm] - upper turret : 6 positions - lower turret : 6 positions - number of rotary positions on turret : 6 - sub-spindle maxi diameter : 12.7 [mm] - sub-spindle rotation speed : 12 000 [rpm] - dimensions : 2850 x 110 x 1480 [mm] - hours in production : 12408 [H] - spindle hours : 9400 [H] EQUIPMENT Hjdeuhav Djpfx Apdew - CNC TRAUB TX 8i control - bar feeder LNS Alpha ST 320 - C axis on main spindle and sub-spindle - brake on main spindle and sub-spindle - parts catcher with conveying strip - anti fire device - lubricating tank with pump with cooling unit - chip conveyor - various fixed and driven tool holders

Condition: ready for operation (used), Selling a well-maintained Mikron VC 1000 milling machine due to the purchase of a new machine. Hodjh Tnpxopfx Apdow

Condition: good (used), Year of construction: 2007, control 840 D x-axis 2500 mm y-axis 2500 mm z-axis 1700 mm Control system - Siemens Sinumerik 840 D Max. workpiece weight - 6000 kg Spindle diameter - 130 mm Hodpfswzyp Usx Apdow Quill stroke - 700 mm Tool holder - ISO 50 DIN 69871 - AD Max. torque at the spindle - 1847 Nm Total power requirement - 65 kW Machine weight approx. 45 t Space requirement approx. 10.9 x 9.3 x 5.7 m