Arburg 170 CMD-150-45

ARBURG

Condition: used, Year of construction: 2001, clamping force: 25 kN, displacement volume: 20 cm³, injection pressure: 2,500 bar, overall weight: 1,800 kg, load hours: 38,850 h, screw conveyor diameter: 18 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Gtedpfx Asyt R S Aohvew

Condition: ready for operation (used), Year of construction: 2014, operating hours: 22,626 h, clamping force: 100 kN, screw diameter: 25 mm, Hydraulic injection moulding machine manufactured in 2014. This Arburg 470 H 1000-170 features a closing force of 100 tons and a screw diameter of 15/25 mm. It includes a selection unit and a single platen design, with a beam spacing of 470 x 470 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 470 H 1000-170 machine we have for sale. Contact us for further details. Gtsdpeytqlcefx Ahvow • Selection unit: yes • Single platen: yes • Beam spacing: 470 x 470 mm • Operating hours: 22,626 h • Electricals: • Operating voltage: 400 V, 3~, 50 Hz • Control voltages: 230 V, 50 Hz; 24 V~ • Motor/heating rated current: 80 / 58 A • Total rated current: 138 A • Total connected load: 75 kW • Condition note: small servo motor problem Additional equipment • Geiger handling (optional)

Condition: new, Year of construction: 2010, operating hours: 72,154 h, clamping force: 800 kN, screw diameter: 25 mm, displacement volume: 54 cm³, ARBURG Allrounder 900 T 800-150 Stock no.: 503576 Manufacturer: ARBURG Model: Allrounder 900 T 800-150 Control system: Year of manufacture: 2010 Operating hours: 72,154 h Technical Data – Clamping Unit Clamping force: 800 kN Tie bar spacing (h x v): 900 x 900 mm Min. mould height: 250 mm Max. daylight between platens: 550 mm Opening stroke: 300 mm Rotary table diameter: 900 mm Ejector stroke: 150 mm Ejector force: 46 kN Centric location, moving platen (D): 90 mm Centric location, fixed platen (D): 90 mm Technical Data – Injection Unit Screw diameter: 25 mm Shot volume: 54 ccm Injection pressure: 2,500 bar Screw length: 24 l/d Screw torque: 210 N Plasticising rate: 49 g/s PS Free-flow injection rate: 80 g/s PS Dimensions & Weight Machine dimensions (LxWxH): 3.8m x 1.85m x 2.15m Total weight: 5,000 kg Gtsdpfxjytd Spe Ahvew Equipment Display text in German 1x air valve Machine with rotary table Machine with water manifold Levelling elements BDE interface

Condition: good (used), Year of construction: 2013, operating hours: 36,163 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 25 mm, displacement volume: 59 cm³, ARBURG Allrounder 375 V 500-170 Stock no.: 503615 Manufacturer: ARBURG Model: Allrounder 375 V 500-170 Control: Selogica-direct Year of manufacture: 2013 Operating hours: 36,163 h Technical Data – Clamping Unit Clamping force: 500 kN Minimum mold height: 200 mm Maximum mold height: 550 mm Maximum platen distance: 302 mm Opening stroke: 225 mm Rotary table diameter: 900 mm Ejector force: 70 kN Movable platen centering diameter: 125 mm Tool weight: 230 kg Technical Data – Injection Unit Screw diameter: 25 mm Shot volume: 59 cm³ Injection pressure: 2,500 bar Screw length: 24 l/d Screw speed: 35 rpm Screw torque: 210 Nm Number of heating zones: 5 Dimensions & Weight Machine dimensions (LxWxH): 3 m x 1.6 m x 3.48 m Total weight: 3,540 kg Equipment Display language: German Rotary table 1x hydraulic core pull Machine with water battery Machine without material hopper Levelling elements EUROMAP 67 handling interface EUROMAP 73 interface Interface for ejector plate safety Gtsdpfeytdfijx Ahvow

Condition: used, Year of construction: 2007, ARBURG - ALLROUNDER 370U 600-290 - 2007 - 370 tie-bar spacing / machine size - machine can run horizontal, vertical or angled - flexible mould handling - clamping force 600 kN = 60 t - 290 injection unit size/ shot volume - working hours 130000 - incl. brand new changed worm - more pieces, also S and C types Gtjdpeyulhzjfx Ahvew

Condition: excellent (used), Year of construction: 2015, ARBURG A 1500 T 2000-400 Drehtisch (29.844 h) (S&P 3792) Manufacture year: 2015 Operating hours: 29,844 Stunden Screw: 40 mm Gtjdjyucccjpfx Ahvow Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 200 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4700 x 2100 x 2600 mm Eeight: 11500 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 2 x Corepuller, Airvalve, Interface Colorizing, Hotrunner, price when new approx. 250.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,171 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force Gsdpfxeyg I Iho Ahvetw • Extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Injection/plasticizing unit: • Screw diameter: 45 mm (without nozzle) • High wear-resistant version • Sinter-metal check ring • CrN coating on screw and check ring • Suitable for abrasive, corrosive, and high-temperature thermoplastics • Technology level 2 – servo-controlled, dual-circuit pump system: • Two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system: • Touchscreen operation with process editor • 15-inch (38.1 cm) display • Multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • Connectivity/interfaces: • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • EUROMAP 67 robot interface • Prepared for ARBURG MULTILIFT robot system • Utilities: • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • 400 V / 50 Hz, with neutral conductor • Hours: 9,171 Additional equipment • None included in the listing • Note: Machine is prepared for robot integration (EUROMAP 67 interface; prepared for ARBURG MULTILIFT), but no robot/automation is included.

Condition: ready for operation (used), Year of construction: 2021, clamping force: 1,600 kN, overall weight: 5,900 kg, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Machine Benefits Gedpfx Ajx D E Dyjhvetw • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Extra Information Screw Diameter: 400 unit: 35 / 40 / 45 mm Injection Pressure (Max.): 400: 2500 / 2000 / 1580 bar Shot Weight (Max. g PS): 400: 141 / 184 / 232 g Heating Output 400: 9.7 kW | 5 zones Net Machine Weight: 400: 5900 kg

Condition: ready for operation (used), Year of construction: 2004, operating hours: 64,300 h, clamping force: 3,200 kN, screw diameter: 60 mm, injection weight: 723 g, total height: 2,400 mm, overall weight: 17,700 kg, This hydraulic injection moulding machine was manufactured in 2004. It features a screw diameter of 60mm and can handle a maximum injection weight of 723g. The machine supports a clamping force of 3200kn with a maximum opening stroke of 700mm. It is equipped with special features like 2xAS core pull and 6xDS hot runner control points. Ideal for robust performance in a production setting, the Arburg Allrounder Selecta 720 S 3200-2100 machine we have for sale. Contact us for more information. Additional equipment • The Wittmann robot is not included • Conveyor belt is included, protective housing only for the electrical components • No other peripherals are included. Machine Benefits Qualitative Machine Benefits • Condition: used, pump overhauled Technical Machine Benefits • Known defects: water computer and water batteries should be overhauled (no influence on function) • Machine without handling system and peripherals Extra Information Gtsdpfx Ahsx D N Sbevew Machine still under power Dimensions Machine Depth 7200 mm

Condition: ready for operation (used), Year of construction: 2014, operating hours: 54,454 h, screw diameter: 25 mm, This Arburg 470 H 1000-170 was manufactured in 2014. A hydraulic injection moulding machine featuring a closing force of 100t and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load of 75kW. Ideal for precision moulding applications. Contact us for more information about this machine. • Screw: 25mm Gtedsx D Rcuepfx Ahvew • Operating voltage: 400 V, 3-phase, 50 Hz • Control voltage: 230 V, 50 Hz; 24 V AC • Motor rated current: 80 A • Heating rated current: 58 A • Total rated current: 138 A • Total connected load: 75 kW • Calibration year: 2027 • Optional: Geiger Handling