Arburg 520C-220-675

ARBURG

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,171 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force • Extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Injection/plasticizing unit: • Screw diameter: 45 mm (without nozzle) • High wear-resistant version • Sinter-metal check ring • CrN coating on screw and check ring • Suitable for abrasive, corrosive, and high-temperature thermoplastics • Technology level 2 – servo-controlled, dual-circuit pump system: • Two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system: • Touchscreen operation with process editor Codpsyg I Ihefx Aa Espw • 15-inch (38.1 cm) display • Multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • Connectivity/interfaces: • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • EUROMAP 67 robot interface • Prepared for ARBURG MULTILIFT robot system • Utilities: • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • 400 V / 50 Hz, with neutral conductor • Hours: 9,171 Additional equipment • None included in the listing • Note: Machine is prepared for robot integration (EUROMAP 67 interface; prepared for ARBURG MULTILIFT), but no robot/automation is included.

Year of construction: 1999, condition: excellent (used), injection molding machine krauss-maffai 150-700 c1 year 1999 Cpedpfeh S Dncjx Aa Eew Screw diameter 55 mm In top condition, still in operation

Condition: ready for operation (used), Year of construction: 2006, operating hours: 61,935 h, clamping force: 500 kN, screw diameter: 30 mm, injection weight: 77 g, Hydraulic injection moulding machine manufactured in 2006. This Arburg 320C 500-170 GE features a clamping force of 500 kN and a screw diameter of 30 mm. It has a maximum ejector stroke of 125 mm and a platen distance of 550 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 320C 500-170 GE machine we have for sale. Contact us for further details regarding this machine. • Min. mould installation height: 200 mm • Tie bar spacing (H × V): 320 × 320 mm • Platen distance: 550 mm • Max. ejector stroke: 125 mm • Installed total power: 22.9 kW • Total connected load: 34 kW • Nominal voltage: 400 V • Frequency: 50 Hz • Rated current: 49 A • Total machine cycles: 11,986,266 Cpsdpfx Aaeylybqo Esw • Total pump operating hours: 61,935 h

Condition: ready for operation (used), Year of construction: 2004, operating hours: 64,300 h, clamping force: 3,200 kN, screw diameter: 60 mm, injection weight: 723 g, total height: 2,400 mm, overall weight: 17,700 kg, This hydraulic injection moulding machine was manufactured in 2004. It features a screw diameter of 60mm and can handle a maximum injection weight of 723g. The machine supports a clamping force of 3200kn with a maximum opening stroke of 700mm. It is equipped with special features like 2xAS core pull and 6xDS hot runner control points. Ideal for robust performance in a production setting, the Arburg Allrounder Selecta 720 S 3200-2100 machine we have for sale. Contact us for more information. Additional equipment • The Wittmann robot is not included • Conveyor belt is included, protective housing only for the electrical components • No other peripherals are included. Machine Benefits Qualitative Machine Benefits • Condition: used, pump overhauled Technical Machine Benefits • Known defects: water computer and water batteries should be overhauled (no influence on function) • Machine without handling system and peripherals Extra Information Cpsdpfxsx D N Sbo Aa Eow Machine still under power Dimensions Machine Depth 7200 mm

Condition: excellent (used), Year of construction: 2013, x-travel 1000 mm y-travel 550 mm z-travel 500 mm CNC-control Fanuc Oi-MD table-size 1.100 x 500 mm max. table load 700 kg spindle taper ISO BT-40 spindle turning speed range 10.000 U/min feed stepless 24.000 mm/min rapid traverse 36/36/30 m/min drive capacity - spindle motor 15/11 kW tool change unit 24 coolant IKZ 20 bar voltage 400 V total power requirement 30 kVA Cedpfxexvdtwo Aa Ejpw weight of the machine ca. 6,5 t dimensions of the machine ca. 3,35 x 2,20 x 2,67 m chip conveyor 2,40 x 1,50 x 1,40 m filter unit 0,90 x 1,40 x 1,30 m Transformer 0,60 x 0,55 x 0,55 m - Serial No..:M281361B5N D - Machine ON: 21,011 h - NC-Indexing Device Manufacturer KITAGAWA, (Call by M-Command) - control: FANUC Oi-MD - Internal coolant supply through spindle 20 bar - Chip conveyor

Condition: ready for operation (used), Year of construction: 2021, clamping force: 1,600 kN, overall weight: 5,900 kg, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Extra Information Cpsdpfx Aaex D E Dys Esw Screw Diameter: 400 unit: 35 / 40 / 45 mm Injection Pressure (Max.): 400: 2500 / 2000 / 1580 bar Shot Weight (Max. g PS): 400: 141 / 184 / 232 g Heating Output 400: 9.7 kW | 5 zones Net Machine Weight: 400: 5900 kg

Condition: ready for operation (used), Year of construction: 2014, operating hours: 22,626 h, screw diameter: 25 mm, This Arburg 470 H 1000-170 was manufactured in 2014. A hydraulic injection moulding machine featuring a closing force of 100t and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load of 75kW. Ideal for precision moulding applications. Contact us for more information about this machine. • Units available: 2 similar units • Operating voltage: 400 V, 3-phase, 50 Hz • Control voltage: 230 V, 50 Hz; 24 V AC • Motor rated current: 80 A • Heating rated current: 58 A • Total rated current: 138 A • Total connected load: 75 kW • Calibration year: 2027 • 1x unit from 2011 availabe Cpsdex D Rcujpfx Aa Esw

Year of construction: 1987, condition: ready for operation (used), Clamping force: 220kN, min. mould height: 200mm, max. opening stroke: 200mm, max. platen distance: 400mm, ejector stroke: 80mm, machine dimensions X/Y/Z: approx. 2600mm/800mm/1600mm, weight: approx. 760kg. An on-site inspection is possible. Cpsdjw R Dg Uopfx Aa Eow

Condition: ready for operation (used), Year of construction: 2013, operating hours: 54,526 h, screw diameter: 35 mm, This Arburg 520 H 1500-400 was manufactured in 2013. A hydraulic injection moulding machine with a closing force of 150t and a screw diameter of 35mm, it operates on 400V 3∼, 50Hz with a total connected load of 89kW. Consider the opportunity to buy this Arburg 520 H 1500-400 hydraulic injection moulding machine. Contact us for more information. • Operating voltage: 400 V 3~, 50 Hz • Control voltage: 230 V, 50 Hz; 24 V~ • Motor/heating rated current: 90/69 A • Total rated current: not specified • Total connected load: 89 kW Cpedpfxox D Rk Es Aa Eew

Year of construction: 2007, condition: ready for operation (used), This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical main movements by servo drives, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking to get high-quality injection molding capabilities, consider the Arburg 420A 1000-400 machine we have for sale. Contact us for more information about this machine. • Drive technology: • Electromechanical main movements by servo drives: dosing, injection, mold open/close, ejector • Hydraulic movement for nozzle displacement • Thermoplastic processing • Small hydraulic unit with accumulator, 5.5 kW, 10 cm³ pump (Pos 132/22) • Machine platens with centering ring D125 mm (Pos 356/11) • Injection unit (servo-controlled): • Horizontal 400 injection unit • Modular plasticizing unit with central coupling and adaptive temperature control • Plasticizing assembly D25 mm, high wear/corrosion resistance; open nozzle (220/25), flat nozzle tip (300/00), heater band (320/00) (Pos 060/25) • Heater band temperature up to 450 °C (Pos 427/02) • Standard drive coupling, double-flat (Pos 061/10) • Without hopper (Pos 600/06) • Servo-regulated, programmable nozzle contact force (Pos 408/03) • Clamping unit: • Five-point double toggle with servo-electric adjustment • Electric mold height adjustment • Prepared for mounting a linear robot on the fixed platen • Mold protection via ejector position monitoring (Pos 605/05) • Machine feet (Pos 605/03) • Quick coupling for ejector bar (Pos 605/06) • Electric ejector with position control (Pos 381/05) • Programmable hydraulic core for parallel movements (Pos 382/00) • Air blow unit 1 with pressure reducer (Pos 361/01) • Machine cooling circuits, regulated and programmable (Pos 525/02) • Cooling water manifold with 4 manually adjustable circuits (Pos 512/04) • Control, electrical cabinet, interfaces: • Selogica control • Software packages (Pos 555/01–555/07): Extended mechanical cycle controls; Extended movements; Production control; Optimization/Operator assistance; Quality assurance control; Documentation • Temperature-regulated electrical cabinet (Pos 605/07) • Selogica Direct, French language (Pos 131/05) • Flash card reader (Pos 455/05) • Operator authorization by card, Euromap 65 (Pos 455/06) • Acoustic alarm (Pos 457/00) Codex D Hgvepfx Aa Eepw • Additional socket combination with RCD (Pos 444/01) • 12 mold temperature measurement zones (Pos 469/12) • Additional heater band for nozzle (Pos 468/01) • Interface for HB-Therm mold temperature controller (Pos 453/01) • USB serial interface for printer (Pos 454/03) • Robot interface Euromap 67 (Pos 425/05) • Electrical and mechanical preparation for external robot (Pos 425/02) • Water shut-off valve (Pos 501/01) • Interface for Thermolift dryer (Pos 464/01) • Interface for color dosing unit (Pos 493/00) Additional equipment • Electric conveyor belt, programmable (Pos 412/02) • Sorting flap for separating good/bad parts (Pos 375/00)

Condition: excellent (used), Year of construction: 2007, operating hours: 53,000 h, functionality: fully functional, machine/vehicle number: 206432, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, ejector stroke: 225 mm, overall weight: 7,450 kg, Equipment: documentation/manual, Here we, as a dealer in injection moulding machines, are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current note – Tax notice and advantage for used machines: As of 01.07.2025, used machines will also be eligible for a special depreciation of 30% annually for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial number: 206432 Year of manufacture: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Functional condition: Fully operational Condition: Very well-maintained – German origin Extras: - Thermoplastic cylinder complete, 50 mm, highly wear-resistant - Screw in HC version instead of standard - Selogica direct control - Hydraulic system with 2 variable-displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastic processing - Open nozzle 50 mm - Nozzle tip 50 mm extended - Heating band for open nozzle - Heating band for extended nozzle tip - Central clamping platen set 570, center Ø 125 mm - 2-piece air blast device with pressure regulator - Air blast device connection 1 - Selector unit connection - Core puller 1 for serial motion holding pressure via check valve - Conveyor belt connection via 5-pin socket - Robot interface (per EUROMAP 67), 50-pin - ARBURG host computer interface - Additional socket distributor: 1x CEE, 1x Schuko - Serial printer interface USB - CompactFlash interface for data set storage - Operation authorization with chip card per EUROMAP 65 - 1 additional heating control circuit for nozzle or adapter with socket - Dosing unit interface Cedpsw Tt R Iefx Aa Espw - Free cooling circuits, manually adjustable - Machine-specific cooling circuits controlled - Extended monitoring package - Extended motion package - Production control package - Optimization / operator assistance package - Quality assurance package - Documentation package Complete documentation included. Injection unit: Screw diameter: 50 mm Shot weight: 359 g/PS Injection pressure: 2000 bar Shot volume: 392 cm³ Clamping unit: Clamping force: 200 t / 2000 kN Tie bar spacing: 570 x 570 mm Mounting plates: 795 x 795 mm Mould installation height: 300 mm Max. platen distance: 950 mm Opening stroke: 650 mm Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is available for immediate delivery at our warehouse in Hannover, Germany and has been tested. Warranty: Warranty until initial commissioning. Loading/shipping: Free loading onto the buyer's truck or free delivery within Germany (freight charge applies) Available from our warehouse in Hannover, Germany. For your information regarding our machines and company: - We sell only our own machines purchased from ongoing production at our Hannover warehouse. - All listed machines are inspected and tested prior to removal. - We do NOT sell insolvency assets – we are NOT brokers handling third party property. - All offered machines come from successful businesses where proper maintenance is standard practice. - All machines offered are available for viewing at our warehouse.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 68,463 h, screw diameter: 35 mm, This Arburg 470 E 1000-700 was manufactured in 2011. A robust electrical injection moulding machine, it features a closing force of 100 tons and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load of 78kW, it's designed for efficient performance. Consider the opportunity to buy this Arburg 470 E 1000-700 electrical injection moulding machine. Contact us for more information. Codpfx Aox D Rndsa Eepw • Operating voltage: 400 V, 3-phase, 50 Hz • Control voltage: 230 V, 50 Hz; 24 V AC • Motor rated current: 61 A • Heating rated current: 58 A • Total rated current: 119 A • Total connected load: 78 kW • Calibration (year): 2027 • selection unit: yes • single platen: yes • beam spacing: 470 x 470

Condition: ready for operation (used), Year of construction: 2018, operating hours: 58 h, General Data Measurements width 4360 mm Measurements depth 1718 mm Measurements height 3910 mm Machine weight 7600 kg Injection Unit Screw diameter 35 mm Injection pressure 2500 bar Clamping Unit Clamping force 1000 kN This Arburg ALLROUNDER 1200 t 1000 - 400 Injection moulding machine was manufactured in the year 2018 in Germany. It has 58 production hours. The machine has a clamping force of 1000 kN, machine like new, used only for testing. Machine needs to be CE certified by the customer, we have a quote from a third party starting at 2.000€. Application Types Cjdpfx Aaox D Nc Hs Eepw Injection Moulding

Condition: good (used), Year of construction: 2000, 20000 rpm, tool measurement on table will come, Csdpfjr Urm Ssx Aa Eopw Parts shown by hand not come.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 37,049 h, clamping force: 4,000 kN, overall weight: 21,000 kg, This Arburg 820 S 4000 - 2100 was manufactured in 2016. It features a clamping force of 4000 kN, a screw diameter of 60-100 mm, and a shot weight up to 1860 g. The machine is equipped with a SEPRO SR AXESS 30 S3 robot and has a hydraulic pump drive power of 55 kW. Ideal for precision in plastic injection molding. Contact us for more information about this machine. Clamping unit • Locking force (max.): 150 kN • Opening force (max.): 100 kN / increased: 800 kN • Opening stroke (max.): 700 mm • Mold height (min.): 350 mm • Distance between platens (max.): 1050–1550 mm • Clear tie bar distance: 820 × 820 mm • Mold mounting platens (W × H): 1171 × 1171 mm • Mold half weight (max.): 4500 kg Cpedoydpvbopfx Aa Eew • Ejector force (max.): 100 kN • Ejector stroke (max.): 250 mmHydraulics / drive / miscellaneous • Hydraulic pump drive power: 55 kW • Installed total power: • 4000-2100: 88.9 kW • 4000-3200: 96.2 kW • Color: Plastic-coated structure (light gray / mint green / rapeseed yellow) • Control cabinets: Safety regulation DIN EN 60204 • Socket combination: 1 Schuko + 1 Cekon • Injection unit power supply: 1 × 16 AInjection unit • Effective screw length (L/D): 23/20/17.5 | 70/80/90 | 23/20/18 • Screw diameter (mm): 60/65/70 | 80/90/100 | 60/65/70 • Theoretical shot volume (max., cm³): 792/1078/1407 | 2513/3462/4240 | 1132/1608/2036 • Shot weight (max., g PS): 293/384/1826 | 1255/1469/1860 | 820/1167/1477 • Injection pressure (max., bar): 2500/2000/1530 | 2500/1500/1200 | 2500/2000/1530 • Injection flow rate (max., cm³/s): 294/362/400 | 812/1030/1250 | 312/396/440 • Injection flow rate with accumulator (max., cm³/s): 354/450/502 | 1188/1552/1964 | 375/475/528 • Back pressure positive/negative (max., bar): 350/50 | 350/50 | 350/50 • Screw circumferential speed (max., m/s): 0.38 | 0.28 | 0.28 • Screw torque (max., Nm): 2057/2247/2247 | 6757/80 | 2057/2247/2247 • Nozzle contact force (max.): 110 kN • Nozzle stroke (max.): 600 mm • Heating zones / heating capacity: 6 × 4500 + 3300 | 6 × 5500 + 4300 • Installed nozzle heating: 1000 W | 1250 WDimensions and weights (base machine) • Clearance length: 490 mm • Electrical connection (fuse protection) motor + heating: 250 A • Electrical connection (fuse protection) motor: 125 A • Electrical connection (fuse protection) heating: 50 / 63 A Additional equipment • SEPRO SR AXESS 30 S3 robot (2008)