520C-200-675

ARBURG

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 198346, clamping force: 3,600 kN, screw diameter: 70 mm, injection pressure: 2,000 bar, injection weight: 984 g, opening stroke: 1,400 mm, TECHNICAL DETAILS Clamping force: 3,600 kN Platen size (H x W): 1,040 x 1,040 mm Column spacing (H x W): 720 x 720 mm Minimum mold height: 300 mm Maximum mold height: 300 mm Dcodpfx Asy T Hrmegvjh Maximum opening stroke: 1,400 mm Screw diameter: 70 mm Injection volume: 1,078 cm³ Shot weight: 984 g Injection pressure: 2,000 bar MACHINE DETAILS Electro-hydraulic system Rated power of pump motor: 55 kW Heating capacity: 30.3 kW Net weight with control cabinet: 17 t

Condition: good (used), Year of construction: 2003, operating hours: 106,864 h, clamping force: 1,300 kN, screw diameter: 35 mm, The machine was very well looked after, service and maintenance were always carried out on time. Good condition, fully functional Still in use until week 11 Further service reports and documents available Technical data: YEAR OF MANUFACTURE: 2003 Automatic operation: 106,864 h Clamping force: 1300 kN Screw diameter: 35 mm Screw stroke: 180 mm Closing force: 50 kN Opening stroke: 500 mm distance between ejector plates: 750 mm Ejector force: 40 kN Advance package - VE561/20 LGS Position-regulated screw with control valve on the injection unit for particularly high dynamics and reproducibility of the injection process, the back pressure is regulated, the nozzle contact force is manually adjustable - VE 557/00 AES Energy-saving system for automatic performance optimization and corresponding energy energy saving through infinitely variable adjustment of the pump drive speed to the respective power requirement of the spraying cycle - VE 460/00 ED Electromechanical metering drive via a speed-controlled three-phase asynchronous motor to increase productivity through simultaneous movement, through gentler material preparation and corresponding energy savings Dcjdsrp Dyrspfx Agvsh compared to hydraulic dosing On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: ready for operation (used), Year of construction: 2021, operating hours: 67 h, clamping force: 1,600 kN, screw diameter: 45 mm, overall weight: 5,900 kg, controller manufacturer: ARBURG, controller model: SEOLOGICA direct, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Dcsdpfx Aex D E Dyogvsh Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Extra Information • Screw Diameter: 45 mm • Injection Pressure (Max.): 1580 bar • Shot Weight (Max. g PS): 232 g • Heating Output 9.7 kW | 5 zones • Net Machine Weight: 5900 kg

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, clamping force: 700 kN, Equipment: documentation/manual, Seologica controll Clamping force: 70 t Screw diameter: 40 mm (highly resistant) Distance between tie bars V: 370 mm Dcjdpeygtqujfx Agvoh Distance between tie bars H: 370 mm Tie bar distance: 370x370 mm HxV plates: 510x510 mm Mould tickness min-max: 200 Stroke: 400mm Shot volume: 188 cm3 Type: Uni Drive: Hydraulic Air valve: 1 Hours: 23000 2 servo pumps 4 free cooling circuits 6 electric heating zones for mould

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, 2000 Arburg projector. 130 tons of closing force. The machine is delivered completely reconditioned in our facilities in Heras (Cantabria). New gaskets in the sealing body. We can show it in operation. Technical details CLOSING POWER 1300 kN PLATE DIMENSIONS 660x840 OPENING STROKE 575mm Dsdporxtpdefx Agvjch MAXIMUM DISTANCE BETWEEN PLATES 800/850 DISTANCE BETWEEN COLUMNS 420x420/470x470 SPINDLE 50mm INJECTION VOLUME 353cm3 INJECTION WEIGHT 117 YEAR OF MANUFACTURE 2000 INJECTION PRESSURE 2500bar

Condition: good (used), Year of construction: 2006, Clamping force: 150 tons Opening stroke: 500 mm Mould height: 250 mm Dcedpfozatfrjx Agveh Clamping platen daylight: 750 mm Distance between tie bars: 470 x 470 mm Mould clamping plattens (b x h) : 650 x 650 mm Ejector stroke: 175 mm Screw diameter: 40mm Injection volume: 201 cm3 Shot weight: 184 g Working hours: 33.165 h Core pullers: 1x Air blast: 1x Robot interference: yes

Condition: ready for operation (used), Year of construction: 2005, clamping force: 4,000 kN, overall weight: 22,500 kg, Hydraulic injection moulding machine manufactured in 2005. This Arburg SELECTA 820 S 4000 - 3200 features a clamping force of 4000 kN and an opening stroke of 700 mm. The machine has a platen size of 1171 x 1171 mm and a maximum moving platen weight of 4500 kg. If you are looking to get high-quality injection moulding capabilities, consider the Arburg SELECTA 820 S 4000 - 3200 machine we have for sale. Contact us for further details. Dcjdpfx Aoy A Ny Eegvjh • Quantity available: 4 • Clamping unit: • Opening force: 100 kN • Opening stroke: 700 mm • Minimum mould height: 350 mm • Maximum daylight: 1550 mm • Tie bar spacing: 820 x 820 mm • Platen size: 1171 x 1171 mm • Max. moving platen weight: 4500 kg • Ejector force: 100 kN • Ejector stroke: 250 mm • Injection unit: • Screw diameter: 70 mm • Screw L/D ratio: 23 / 20 / 18 • Max. screw stroke: 320 mm • Shot volume: 1323 / 1608 / 2036 cm³ • Max. shot weight (PS): 1215 / 1469 / 1860 g • Injection pressure: 2500 / 2000 / 1530 bar • Injection rate: 304 / 396 / 502 cm³/s • Screw speed: 350 rpm • Screw peripheral speed: 65 / 75 / 80 m/min • Screw torque: 2247 Nm • Nozzle contact force: 110 kN • Nozzle stroke: 600 mm • Drive and power: • Hydraulic pump motor: 55 kW • Total installed power: 96.2 kW • Heating: • Cylinder heating capacity: 6 zones (5500 + 4300 W) • Nozzle heating: 1250 W • Oil tank capacity: 590 l

Condition: good (used), Year of construction: 1998, operating hours: 83,000 h, screw diameter: 50 mm, overall weight: 7,400 kg, Demag 150 tons Auger diameter: 50 mm Dcodjt Dx Hbspfx Agveh Impact volume: 399 cc Shot weight: 360 g Opening path max: 500 mm Mold height min: 250 mm Mold height max: 560 mm (660 with WA) Max. distance between moldboards: 1060 mm (1160 with WA) Mold table size H*V: 750*750 mm Distance between tie bars H*V: 500*500 mm Max. tool weight: 1700 kg

Condition: like new (used), Year of construction: 2015, operating hours: 47,247 h, functionality: fully functional, machine/vehicle number: 230999, clamping force: 500 kN, screw diameter: 35 mm, displacement volume: 115 cm³, injection weight: 105 g, Equipment: documentation/manual, Here, as a dealer in injection molding machines, we offer the following well-maintained used injection molding machine: We also purchase well-maintained injection molding machines manufactured from 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Arburg Type: 320C 500-170 Serial number: 230999 Year of manufacture: 2015 Operating hours: 47,247 h Control: Selogica Dimensions L/W/H: 3.12 x 1.43 x 1.99 Weight: 2300 kg Functionality: fully functional Condition: very well maintained Extras: 1x core pull Handling interface Thermoplastic screw/cylinder 35 mm, highly wear-resistant - Complete documentation and software (on CF card) German language - From first owner - Origin: Germany Regular maintenance by the manufacturer and previous owner Dedpfx Aev U Tl Degvoch Visible peripheral devices are not included in the offer - only if they are explicitly mentioned. Injection unit Screw diameter: 35 mm Injection weight: 105 g/PS Injection pressure: 1,470 bar Injection volume: 115 ccm Clamping unit Clamping force: 50 tons / 500 kN Tie bar spacing: 320 x 320 mm Platen dimensions: 446 x 446 mm Tool installation height: 200 mm Maximum platen distance: 550 mm Ejection stroke / force: 125 mm / 30 kN Clamping unit: hydraulic Motor power: 11 kW Heating power: 9.4 kW Total power: 21 kW The machine is immediately available in our warehouse in Hanover/Germany and has been tested. ✔ Warranty Warranty until the first commissioning Loading/shipping Free loading onto the buyer's truck or free delivery to your premises against reimbursement of freight costs - worldwide delivery possible Immediately available in our warehouse in Hanover/Germany For information about the machines we offer and our company: - We only sell machines that we have purchased ourselves from current production, from our warehouse in Hanover. - All offered machines are inspected and tested before dismantling. - We do NOT sell insolvency goods - we are NOT an intermediary dealing with third-party property. - All offered machines come from successful companies for whom maintenance and care are a matter of course. - All offered machines are available in our warehouse and can be viewed while powered on.

Condition: excellent (used), Year of construction: 2015, operating hours: 29,500 h, functionality: fully functional, machine/vehicle number: 231000, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 570 mm, displacement volume: 474 cm³, injection pressure: 2,000 bar, injection weight: 434 g, ejector stroke: 225 mm, overall weight: 7,450 kg, Equipment: documentation/manual, Here, as a dealer in injection molding machines, we offer the following well-maintained, used injection molding machine. Of course, we also purchase well-maintained injection molding machines manufactured from 2010 onwards. We have been a wholesaler of used injection molding machines for over 25 years. Due to a recent development – tax information and advantage for the used machine: From July 1, 2025, used machines can also be considered for tax purposes with a special depreciation of 30% per year. Manufacturer: Arburg Type: 570C 2000-800 GE Serial number: to be provided Year of manufacture: 2015 Operating hours: approx. 29,500 h Machine number: 231000 Control system: Selogica Dimensions L/W/H: 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Functionality: fully operational Condition: very well maintained - German origin Extras: Thermoplastic cylinder, complete, 55 mm, highly wear-resistant Dcodpfxjw Tt R Io Agvjh Thermoplastic processing Open nozzle 55 mm Clamping plate set 570, center © 125 mm 2x core pull Complete documentation Injection unit: Screw: ⌀ 55 mm Injection weight: 434 g/PS Injection pressure: 1650 bar Injection volume: 474 ccm Clamping unit: Clamping force: 200 tons / 2000 kN Tie bar spacing: 570 x 570 mm Clamping plates: 795 x 795 mm Tool mounting height: 300 mm Maximum distance between plates: 950 mm Opening stroke: 650 mm Ejection stroke/force: 225 mm / 66 kN Clamping unit: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connected load: 45 kW Visible peripheral devices are not included in the scope of supply. The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Warranty: Warranty until the first commissioning. Loading/Shipping: Free loading onto the buyer's truck or free delivery to the buyer's premises against reimbursement of freight costs - worldwide delivery possible available from our warehouse in Hanover / Germany For information about the machines we offer and our company: - We only sell our own machines that we have purchased from current production, from our warehouse in Hanover. - All offered machines are inspected and tested before dismantling. - We do NOT sell insolvency goods. - We are NOT an intermediary dealing with third-party property. - All offered machines come from successful companies for which maintenance and care are a matter of course. - All offered machines can be inspected at our warehouse.

Year of construction: 1998, operating hours: 62,144 h, condition: ready for operation (used), Clamping force: 2000kN, tie bar spacing: 520mm/520mm, platen dimensions X/Y: 715mm/715mm, min. mold installation height: 250mm, max. opening stroke: 650mm, ejector stroke: 225mm, ejector force: 66kN. Screw diameter: 55mm, injection weight: 240g, injection pressure: 2500bar, stroke volume: 286cm³, injection unit: 675. Machine dimensions X/Y: approx. 5600mm/1700mm, weight: approx. 7000kg, operating hours: approx. 62144h. Documentation available. On-site inspection is possible. Expected to be available from June 2025. Djdov Ifwxspfx Agvsch

Condition: good (used), Year of construction: 2014, 2014 Arburg Model 320C 500-170 injection Moulding Machine Dcsdpfszbr Dvsx Agvjh Clamping Force: 50 Ton. Screw Diameter : Ø25mm. Shot Weight:75g. Clamping Force:500kN. Distance Between Tie Bars: 320 × 320mm. Platen Size (H × V): 446 × 446mm. Minimum Mould Height: 200mm. Maximum Daylight Opening: 550mm. Ejector Stroke: 125mm. Maximum Shot Volume:85cm³. Maximum Shot Weight (PS): 77g. Injection Pressure: 2,000 bar. Screw Speed Maximum: 400r/min. Nozzle Stroke: 250mm. Nozzle Contact Pressure: 40.6kN. Heating Capacity: 9.4kW. Pump Drive Power: 11kW. Total Installed Power: Approx. 20.5kW. Injection Unit Thermoplastics Injection Unit, 25mm Screw, High Wear-Resistant Design. Approximately 44,124 Recorded Working Hours. Approximate Overall Dimensions (L x W x H): 3,700 x 1,500 x 2,000mm. Approximate Weight: 2,420kg. Please Note: Robot Shown In Images Is Not Included In The Sale.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 211886, Plastic Injection Moulding Machine | Arburg Allrounder 630 S 2500-170 Clamping force [kN]: 2,500 Number of components: 3 Clamping platen width [mm]: 900 Clamping platen height [mm]: 900 Clear tie bar spacing horizontal [mm]: 630 Clear tie bar spacing vertical [mm]: 630 Centre ring diameter [mm]: 160 Min. mould height [mm]: 400 Max. mould height [mm]: 700 Maximum opening stroke [mm]: 600 Maximum ejector stroke [mm]: 225 Thread [M]: 24 Multi turntable type: Rotary table Rotary table diameter [mm]: 900 Rotary table thread [M]: 20 Max. mould weight [kg]: 2,500 Max. mould weight, moving side [kg]: 2,500 Dcedoyf Ha Hopfx Agveh Screw diameter [mm]: EE1:30, EE2:25, EE3:25 Max. shot weight [g] PS: EE1:83, EE2:59, EE3:58 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, robot Inspection possible at any time by appointment. Free loaded on truck (Butzbach). #Tags: ARBURG | Multi 3K | 630S

Year of construction: 1999, condition: ready for operation (used), Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1500kN, screw diameter: 40mm, distance between tie bars: 420mm, injection volume: 182cm³, operating hours: 98234h. Documentation available. On-site inspection is possible. Dcsdpfx Aget E Trhsveh

Condition: excellent (used), Year of construction: 2014, operating hours: 52,999 h, clamping force: 1,500 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 201 cm³, injection pressure: 2,000 bar, injection weight: 184 g, mold height (min.): 250 mm, Arburg 470C-1500-400 injection molding machine with sorting flap (255) Year of production: 2014 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 40 Injection weight [g]: 184 Injection pressure [bar]: 2000 Closing force [kN]: 1500 Column spacing [mm]: 470 x 470 Plate size [mm]: 650 x 650 Min. mold height [mm]: 250 Control type: Selogica Tongue: german Installed power [kW]: 30.4 Working hours [h]: 52999 Weight [kg]: 4850 Dimensions [mm]: 4500×1700 Feed hopper: NO Dcedpfx Aoy U H Htegvoh Core string: 2x Robot socket: euros 67