Injection molding machine

Arburg GOLDEN EDITION 470-1500-400 2012

Condition: excellent (used), Year of construction: 1999, Clamping force: 25 tons Distance between tie bars: 270x270 mm Opening max: 275mm Min Mould height: 200 mm Mold platens size: 400 x 400 mm Screw diameter: 18 mm Injection volume: 20 cm3 Shot weight: 17 g Injection pressure: 2500 bar Working hours: 38.035 h Rsdovl Skgjpfx Ahvsp

Year of construction: 2006, condition: excellent (used), Battenfeld HM 100/525 injection molding machine Year: 2006 Controls: Unilog B4 Technical details Short-circuit force: 1000 kN Size of mold plates (hxv): 680mm x 594mm Distance between columns : 470mm x 420mm Mold opening stroke: 500mm Mold height min: 250mm Maximum clearance : 750 mm Hydraulic ejector - stroke: 150 mm Forward/reverse ejector force: 41.2 kN Injection unit Screw diameter: 40 mm Ls/D ratio: 22 Injection pressure: 2100 bar Injection volume: 251 cm³ Injection weight , PS: 228.4 g Injection stroke: 200 mm Rodpfx Ajk Rnvmehvep Screw speed: 0 - 318 1/min Max plasticization rate: 30.4 g/sec. Nozzle pressure: 86 kN Electrical and hydraulic equipment Installed heating power: 12.1 kW Adjustable barrel heating zones: 1+3 Pump power 18.5 kW Oil capacity 275 liters Dimensions and weights Total weight of the machine: 4,600 kg Dimensions (L x W x H) 4.3 x 1.5 x 2.0 m

Condition: excellent (used), Year of construction: 2010, operating hours: 75,942 h, functionality: fully functional, machine/vehicle number: 213141, clamping force: 400 kN, screw diameter: 18 mm, clearance between the columns: 270 mm, Equipment: documentation/manual, Here we offer the following well-maintained used injection moulding machine as an injection moulding machinery dealer. Of course, we also purchase well-maintained injection moulding machines from year of manufacture 2010 onwards. We have been a wholesaler of injection moulding machines for over 25 years. Manufacturer: Arburg Type: 270C 400-70 Controller: Selogica Year of manufacture: 2010 Operating hours: 75,942 h Machine number: 213141 Extras - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Separator diverter The machine has retrofitted interfaces for - Tool temperature - Heating circuit - Colour / dyeing via Siemens Logo PLC control German language - Single ownership – Origin: Germany Regular servicing by the manufacturer and previous owner Clamping unit Clamping force: 400 kN / 40 tonnes Tie bar spacing: 270 x 270 mm Mounting plates: 446 x 446 mm Rjdpfx Ahjwfua Asvsp Opening stroke: 350 mm Mould height: 200 mm min. Max. distance between platens: 550 mm Ejector stroke: 125 mm Ejector force: max. 30 kN Injection unit Screw diameter: 18 mm Injection volume: 23 cc Shot weight: 21 g Injection pressure: 2500 bar Electrics Pump: 11 kW Heating: 4 zones, 4 kW Installed power: 15 kW Main fuse: 50A Weight: 2,150 kg Warranty Warranty valid until initial commissioning Loading/shipping Free loading onto buyer’s truck or free delivery, freight costs reimbursed Available ex our warehouse in Hannover, Germany For your information regarding the machines we offer and our company: - We only sell machines from our own stock, acquired from ongoing production, ex-warehouse Hannover - All offered machines are inspected and tested prior to dismantling - We do NOT sell insolvency goods – we are NOT brokers dealing with third-party property - All machines offered come from successful companies where maintenance and care are carried out as standard - All listed machines can be inspected at our warehouse

Condition: like new (used), Year of construction: 2021, operating hours: 301 h, machine/vehicle number: 257240, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 470 mm, injection pressure: 2,000 bar, plate length: 637 mm, plate width: 637 mm, power: 42.7 kW (58.06 HP), type of input current: three-phase, Equipment: documentation/manual, Arburg Allrounder 470 E 1000-170 Golden Electric Machine as new. Very little used, only for sample production. Machine is fully equipped: 30 mm screw Redpfexbn T Ssx Ahvep High wear-resistant cylinder 2nd core pull control for sequential movements – holding pressure via check valve 4 free circuit water manifold with optical flow indicator Conveyor belt – electric 6 electrical heating circuits for mold temperature control Full documentation available. Full specification list on demand via email.

Year of construction: 2009, condition: ready for operation (used), Two injection molding machines are offered, year of manufacture 2008 and 2009. Clamping force: 500kN, tie bar spacing X/Y: 320mm/320mm, mold mounting plates X/Y: 446mm/446mm, opening stroke: 350mm, max. platen distance: 550mm, injection unit 170: screw diameter: 25mm-30mm, shot volume: approx. 59ccm/25mm screw, approx. 85ccm/30mm screw, shot weight: approx. 62g to 77g, injection pressure: up to 2500bar. Inspection is possible by arrangement. Redpfx Aex I Rqcehvjp

Condition: ready for operation (used), Year of construction: 2006, operating hours: 77,000 h, functionality: fully functional, clamping force: 5,000 kN, screw diameter: 100 mm, Clamping force 5000 kN Mould opening force, max. 280 kN Travel force movable platen opening 137 kN Travel force movable platen closing 136 kN Size of mould platens (h x v) 1270 x 1200 mm Distance between tie bars (h x v) 900 x 800 mm Redpfx Ajwgni Hohvjp Mould opening stroke 1170 mm Mould height min 480 mm Max. daylight 1650 mm Hydraulic ejector - stroke 250 mm Ejector force 95/48 kN Injection unit: Screw diameter 100 mm Ls/D ratio 18 Injection pressure 1411 bar Stroke volume 2411 ccm Shot weight (PS) 2194 gr. Injection rate 801 ccm/s Screw speed 189 1/min Plasticising rate max. 161 g/s Nozzle pressure 173 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1075 ltr. Dimensions and weights: Dimensions of the machine ca. 7,50 x 2,50 x 2,50 m Total machine weight 27090 kg Max. mould weight 7900 kg Accessories: - Anti vibration pads - 2 x 8 fold water flow regulator Additional Options: - 2 x hydr. core pull on movable plate - 2 x hydr. core pull on fix plate - Robot interface according to Euromap 12 - 16 x hotrunner controller - 1 x air valve on movable plate

Condition: excellent (used), Year of construction: 2009, operating hours: 63,700 h, 1,0 St. gebr. Spritzgießmaschine Hersteller: ARBURG Typ: 270S400-70 Baujahr: 2009 Schließkraft: 40 Tonnen Holmabstand 270 x 270 mm Rsdpjxq R D Esfx Ahvop Schnecken DN: 18 mm Dosiervolumen: 23 ccm³ Spritzteilgewicht 21 g/PS Steuerung: SELGOCIA Ausstattung: -Schnittstelle Roboter -Vertikale Einspritzung Betriebsstunden: ca. 63.700 Hours

Condition: excellent (used), Year of construction: 2014, Arburg 420C 1000-290 (2014) e2 Clamping force (max): 1000 kN Opening force | stroke: 250 kN | 500 mm Mould height (fixed | variable, min): 250 mm Rodpfoxdl H Iex Ahvsp Platen daylight (fixed | variable, max): 750 mm Distance between tie bars (w × h): 420 × 420 mm Mould mounting platens (w × h, max): 570 × 570 mm Weight of movable mould half (max): 600 kg Ejector force | stroke: 40 kN | 175 mm Dry cycle time (EUROMAP 2): 1,8 – 29,4 s Screw diameter: 40 mm Effective screw length (L/D): 17,5 Screw stroke (max): 150 mm Calculated stroke volume: 188 cm³ Shot weight (PS): 172 g Material throughput (PS): 24,5 kg/h Material throughput (PA6.6): 12,5 kg/h Injection pressure (max): 1530 bar Holding pressure (max): 1530 bar Injection flow (max): 182 cm³/s Screw circumferential speed (max): 62 m/min Screw torque (max): 430 Nm Nozzle contact force | retraction stroke: 60 kN | 240 mm Heating capacity | zones: 7,7 kW | 5 zones

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, clamping force: 2,000 kN, Equipment: documentation/manual, Clamping force: 200 t Screw diameter: 55 mm Shot weight: 434 g Redpfx Aex Ir Ngjhvep Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Shot volume: 474 cm3 Platen dimensions : 795 x 795 mm Working hours: 25.969 h Type: Horizontal Drive: Hydraulic Equipment: 1x core puller Euromap 67

Condition: used, Year of construction: 2016, clamping force: 50 kN, displacement volume: 85 cm³, injection pressure: 2,000 bar, overall weight: 2,900 kg, load hours: 35,500 h, screw conveyor diameter: 30 mm, terms of delivery: EXW (ex Works) delivery time: on request Rsdpfx Aoylpy Nehvop terms of payment: 100% prior to delivery