Injection molding machine

Arburg 221KS 250-75

Condition: good (used), Year of construction: 1998, Battenfeld 600/200 CDC Ppsdpfx Amjg Emvheyew Unilog 4000 Closing force 60 tons Year of manufacture 1997 Screw diameter 30 mm Shot weight approximately 90 g

Condition: excellent (used), Year of construction: 2002, Arburg 221K-350-100 Closing 35 tons Year of manufacture 2002 Scrow 25mm Injection soaked 49 cm3 Podpfewgc Drsx Amyopw

Condition: excellent (used), Year of construction: 1999, 1,0 St. gebr. Spritzgießmaschine Hersteller: DR. BOY Ppodpfszaqzdex Amyew Typ: 22 D Baujahr: 1999 Schließkraft: 22 Tonnen Holmabstand: 254 x 254 mm Einbauhöhe MIN, / MAX. 200 / 400 mm Schnecken DN: 22 mm Spritzteilgewicht 27 g/PS

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 132517-100, clamping force: 350 kN, screw diameter: 25 mm, clearance between the columns: 270 mm, displacement volume: 49 cm³, injection pressure: 1,531 bar, injection weight: 44 g, mold height (min.): 150 mm, ejector stroke: 80 mm, opening stroke: 350 mm, plate length: 400 mm, plate width: 400 mm, total length: 3,100 mm, total width: 1,000 mm, total height: 1,800 mm, overall weight: 1,100 kg, heating capacity: 5.5 kW (7.48 HP), pressure: 215 bar, pump power: 7,500 W, power: 20 kW (27.19 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 48 A, Model: Injection Molding Machine Type: PLUS 35 Psdpjyw Ufvofx Amyepw Year: 2010 Weight: 1100kg Control Voltage: 24 V DC Main Motor FLA: 14,7 A Hydraulic System Pressure: 250 bar Manufacturer: Wittmann, Austria

Condition: good (used), Year of construction: 1994, Ref. no.: 17540 Manufacturer: ARBURG Type: 270 C 500-100 RUNHOUR Only 100 Year of construction: 1994 Clamping unit Ppodjyiz U Tjpfx Amysw Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 270 X 270 mm Mould height min.: 200 mm Platen size (h x v): 405 X405 mm Injection unit Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight: 61 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,3 X 1,5 X 2,0 m Machine weight: 2400 kg Further information: Laboratory Machine with Exceptionally Low Operating Hours The offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes. The control system shows only approximately 100 operating hours and just 867 machine cycles. The machine is equipped with a hydraulic drive system and the proven ARBURG Dialogica control unit. In addition, it features an integrated crane system to facilitate mould and component changes. The scope of supply also includes an unused spare screw with a diameter of 15 mm and a complete additional plasticizing unit, providing extra flexibility for different applications. Due to its exceptionally low usage, documented history, and valuable additional equipment, this machine represents a rare opportunity on the used machinery market.

Condition: excellent (used), Year of construction: 2006, Arburg 320 C 400-170 Injection Moulding Machine Year of manufacture: 2006 Clamping force: 40 t Screw diameter: 30 mm Distance between tie bars: 320 × 320 mm Maximum injection volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Maximum screw speed: 400 rpm Nozzle stroke: 250 mm Nozzle contact force: 40.6 kN Heating power: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW Podoxwu R Nopfx Amyspw Machine length: approx. 3.4 m Machine width: approx. 1.4 m Machine height: approx. 2.0 m Machine weight: approx. 2,400 kg

Condition: used, Year of construction: 1998, machine/vehicle number: 145893, clamping force: 350 kN, screw diameter: 25 mm, clearance between the columns: 221 mm, displacement volume: 56 cm³, injection pressure: 2,500 bar, For sale is an Arburg injection molding machine, type Allrounder 221-75-350. The machine is in used condition. Technical data: ARBURG Maschinenfabrik Hehl & Söhne GmbH & Ppedpfxjzki N Ts Amysw Co.KG Model / Type: Allrounder 221-75-350 Machine No. / Serial Number: 145893 Year of Manufacture: 1989 Machine Weight: 970 kg Clamping Force: 350 kN Clear Tie Bar Spacing: 221 mm x 221 mm Platen Dimensions: approx. 342 mm x 342 mm Opening Stroke / Stroke: 275 mm Tool Installation Height: 150 mm / 300 mm Max. Platen Distance: 425 mm Injection Unit: Screw Diameter: 22 mm / 25 mm Max. Injection Volume: up to 56 cm³ Max. Shot Weight: up to 50 g Specific Injection Pressure: up to 2500 bar Electrical Connection Values & Power: Operating Voltage: 380 V (3 phases) Mains Frequency: 50 Hz Heating Power: 3.46 kW Pump Motor: 7.5 kW Total Power / Total Connected Load: 11.0 kW Upon request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT. Inspection possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine Purchase/Sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES, ETC. Gjbn N Ay Dowza Dxogoil Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2011, BATTENFELD 35/75 PLUS INJECTION MOLDING MACHINE Ppsdpfx Amsy Uk Axeyow Technical specifications: Year of manufacture: 2011 Operating hours: 89,192 h Clamping force: 350 kN Injection volume: 25.4 cm³ Injection shot weight: approx. 23–27 g PS Screw diameter: 18 mm Maximum mold opening stroke: 200 mm Column spacing: 270 x 260 mm Platen dimensions: 470 x 280 mm Minimum mold height: 150 mm Centering hole diameter: 110 mm Maximum injection pressure: 2034 bar Hydraulic oil volume: 125 dm³ Total power: 28 kW Machine weight: 1050 kg Machine type: hydraulic Control system: BATTENFELD UNILOG B2 The machine is in very good technical and visual condition. A larger number of machines in the same configuration are available – a total of 12 units manufactured in 2010–2011.

Condition: used, Year of construction: 2005, operating hours: 40,000 h, clamping force: 25 kN, displacement volume: 440 cm³, injection pressure: 1,550 bar, overall weight: 2,500 kg, screw conveyor diameter: 25 mm, terms of delivery: FCA Pegnitz Pjdpfoynbcnsx Amyspw delivery time: on request terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2005, operating hours: 80,000 h, clamping force: 2,000 kN, screw diameter: 55 mm, injection pressure: 1,650 bar, injection weight: 434 g, Arburg 520C-2000-800 (193) Pjdpfx Amjvt Tp Hoyepw Description with conveyor belt, bimetallic screw General information Product Code: 193 Availability: In Stock Year of production: 2005 Brand: Arburg Technical data Shot Weight: 434 g Clamping Force: 2,000 kN Screw dia: 55 mm Injection pressure: 1650 bar Tie bar distance: 520x520 mm Platen size: 728x728 mm Mould height min.: 250 mm Type of controls: Selogica Language: German Power: 44,9 kW Workinghours: 80000 h Weight: 7300 kg Dimensions: 6x2 m Hopper: No Core pull: Yes Euromap: Yes