Press brake

Amada ITS10030

Condition: new, SAHINLER HKM 65 hydraulic punch-cutter Exerted power : Ton 65. Engine power : Kw 5.5 Dimensions (mm) : mm 1.700 x 900 x 1.670 ( L x W x H ). Weight: 1.600 Kg: 1.600 Kg PUNCHING : Punching capacity : mm Ø 2 x Thickness 20 mm. Recess depth: mm 305. Punching stroke : mm 55. Working height : mm 1.030. SHEARING : Plates : mm 300 x 20. mm 375 x 15. Length of blades : Hsdpfxoggbuhj Adaeh mm 380. Round bars : mm Ø 45. Square bars : mm 45. 90° corner profiles : 120 x 120 x 12 mm. 45° corner profiles: mm 70 x 70 x 10 SKIRTING : Max thickness : mm 10. Width : mm 45. Depth : mm 90. Working height : mm 900.

Condition: excellent (used), Year of construction: 2012, Model Amada HFE M2 220t 4m, 8 axis Press Brake Year 2012 Hedpfxov S U Ize Adash Tonnage 220 tonnes Max. Bend Length 4280 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 195L Motor Power Weight 17450 Kg Dimensions Machine Length 5070 mm Machine Depth 2075 mm Machine Height 3085 mm Distance Between Side Frames 3760mm Beam width 180 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Year of construction: 1995, condition: ready for operation (used), A Promecam (Amada) APX 103 CNC press brake is available. Pressing force: 1000kN, working width: 3000mm, column distance: 2550mm, gap opening: 370mm, stroke: 100mm, column depth: 400mm, infeed speed: 70mm/s, bending speed: 9mm/s, return speed: 85mm/s, drive power: 10.5kW. Machine dimensions X/Y/Z: approx. 3500mm/2200mm/2300mm, weight: approx. 6400kg, control: Amada Operator, operating hours: 36261h. The press is still in operation, therefore the operating hours change continuously. Documentation available. On-site inspection is possible. Hodpfxewm Nn Rj Adash

Condition: good (used), functionality: fully functional, working width: 3,100 mm, distance between stands: 2,550 mm, back gauge: 1,500 mm, pressing force: 110 t, Bending capacity: 110 Ton Bending length: 3.100 mm Distance between columns: 2.550 mm Back gauge: 1.500 mm Hedpfx Adewi N T Ejash Stroke length: 150 mm Throat: 250 mm Rapid approach speed: 100 mm/sec. Bending speed: 8 mm/sec. Return speed: 65 mm/sec. Controller: ESA Kvara S630 Touch Featured with: - Foot pedal - Various tool sets - Light screen security Merlino - Controls renewed in 2018 Country of origin: The Netherlands Motor power: 7,5 kW Machine LxWxH: 320 x 160 x 244 cm Machine weight: 8.700 kg

Condition: new, functionality: fully functional, Comparable to Durma, Baykal, Ermaksan, etc. Bending length: 3,020 mm Pressing force: 320 t Approach speed: 140 mm/s Bending speed: max. 10 mm/s Return speed: 130 mm/s Hodsuf Nr Ajpfx Adajh Y-axis stroke: 400 mm Installation height: 650 mm Throat depth: 450 mm Clear distance between uprights: 2,555 mm Machine length: 3,785 mm Machine width: 2,290 mm Width without support arms: 1,740 mm Overall height: 3,100 mm Table height: 920 mm Motor power: 22 kW Oil tank: 300 l Machine weight: 14,450 kg (Data may vary depending on equipment configuration.) Standard equipment: - 3 CNC axes (Y1, Y2, X) - Press beam double-guided, stable and precise - Robust, double-guided backgauge - Backgauge fingers double-guided on linear rails - Movable front support arms with height adjustment - Side and rear safety covers - Lower die adapter rail 60 mm - Manual top tool clamping system (Promecam system) - Foot pedal with emergency stop - 380 V, 50-60 Hz, 3 phases - LED lighting Additional equipment: - Delem DA 66t CNC control - R-axis backgauge CNC-controlled - CNC-controlled crowning - Fiessler Akas 2M laser safety device - 2 additional backgauge fingers (4 in total) - 1 set of upper and lower tools Further bending lengths and capacities available with appropriate accessories!

Condition: like new (used), Year of construction: 2001, AMADA EUROPE 245 Turret Punch Press Technical Specifications: - CNC Control: FANUC 18 i-P - Pressing force: 20 tons - Max. punching format without repositioning with a 31-station head: 1020 x 1290 mm (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - Max. sheet size with repositioning: 1020 x 2540 mm - Max. sheet size with repositioning + 1 rotation (optional): 1500 x 2540 mm - Max. sheet thickness on ball table: 6 mm - Max. sheet thickness on brush table: 3 mm - Max. permissible table load: 100 kg - Punching accuracy: ±0.1 mm - Positioning accuracy: ±0.07 mm - Number of pneumatic clamps: 2 - Number of simultaneously controlled axes: 3 (X, Y, C) - Turret rotational speed: 25 rpm - Strokes per minute, spacing 25.4 mm, cylinder stroke 6.5 mm: 220 spm - Strokes per minute, incremental punching 1 mm, cylinder stroke 6.5 mm: 480 spm - Minimum programmable increment: 0.001 mm - Number of tool stations: 31 (including 3 indexable stations) - Max. tool diameter: 88.9 mm - Indexable stations: 2x 1-1/4", 1x 2" - Max. sheet thickness for indexable station: 3 mm - Slider: hydraulic - Lower dead point of slide feed: 4 programmable positions - Working table size: X=600, Y=400 mm - Memory capacity: 64 KB (~63 programs) - Graphic display: 10.4" LCD - Stopping time: 295 ms - Air pressure: 5 bar - Air consumption: 250 Nl/min - Oil capacity: 160 L Hodohvaaajpfx Adaoh - Light curtain (3 beams): standard in European countries - Installed power: 27 kW - Machine dimensions: L=4460 mm, W=2750 mm, H=2130 mm - Transport dimensions: L=4820 mm, W=2500 mm, H=2414 mm - Machine weight (AMADA EUROPE 245): 10,000 kg - Operating hours: 35,000 hours Year of manufacture: 12/2000, installation: 2001 Single owner, complete service book with full machine history. The machine is in perfect condition, operated only on thin sheets. Start-up warranty. Operator training included in the price. Contact person: 500114006 Best regards.

Condition: new, pressure 40 t throat 225 mm stroke 8-84 mm Table dimensions 580 x 450 mm ram adjustment 55 mm no. of strokes 130 Hub/min ram surface 185 x 180 mm ram hole 40 H7 mm Hedsb U Hwmjpfx Adajh hole in the table 210 x 170 mm T-slots 22 clamping plate 570 x 450 x 65 mm total power requirement 3,5 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 1,4 x 1,1 x 2,1 m

Condition: used, Manufacturer: TRUMPF Type: CS20a EXCELLENT CONDITION Hsde Dv I Tjpfx Adajh

Condition: used, mileage: 227,566 km, power: 130 kW (176.75 HP), first registration: 05/2012, fuel type: diesel, empty load weight: 6,390 kg, maximum load weight: 6,110 kg, overall weight: 12,500 kg, axle configuration: 4x4, wheelbase: 3,050 mm, fuel: diesel, driver cabin: other, gearing type: other, emission class: euro5, suspension: other, number of seats: 2, total length: 5,100 mm, loading space length: 2,650 mm, loading space width: 2,000 mm, loading space height: 4,000 mm, Year of construction: 2012, operating hours: 16,641 h, construction height: 3,360 mm, Equipment: air conditioning, all wheel drive, hydraulics, onboard computer, trailer coupling, The Unimog U400 405/12 impresses with its versatility and robustness and is ideal for use in agriculture and construction. Powered by a powerful 4,249 cc diesel engine with 177 hp and the Euro 5 emissions class, it meets modern environmental standards. With a total mileage of 227,566 km and 16,641 operating hours, it is in good shape. The Unimog has a trailer hitch, air conditioning, a front PTO and municipal hydraulics, which support flexible attachment options. The vehicle was built in 2012 and has only been used by one owner before. With its compact dimensions - 3,360 mm in height, 2,360 mm in width and 5,100 mm in length - it still offers an impressive payload with a permissible total weight of 12,500 kg. The Unimog has a green environmental sticker, which allows it to be used in urban emission zones. Operating hours: 16,641 hours Only sold to businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale. Hjder Uzthopfx Adajh

Condition: new, CNC Hydraulic guillotine shear New machine Manufacturer:UMS Type : PRO. 3100 x 13 CNC Technical data: Cutting length 3100 mm sheet thickness (42 kgf/mm) 13 mm sheet thickness (70 kgf/mm) 8 mm cutting angle: 0,5 - 3 mm 15 pcs. blank holder Cybelec Cybtouch 8 monoblock: steel welded construction Automatic cutting gap adjustment Table with ball rollers High quality, hardened and ground upper and lower knives Light sensor for front side (sheet guide) Adjustable cutting stroke 1 m support arm with scale 1 m support arms ( 2 pieces ) Rear light sensor ( 10-16 mm sensor distance) Cutting line illumination Motor 30 kW throat 180 mm Cutting speed 7/13 Original Rexroth valves Rexroth hydraulic system Rexroth pump, original Eckerle Electrical parts from Siemens Operating instructions German Table height 900 mm Overall dimensions 3840x2830x2180 (WxLxH) Hodponl D Tfsfx Adaoh Total weight 11.000 kg plus commissioning, training and transport Delivery time from order approx. 70 days