Panel Saw

Altendorf F45

Condition: like new (used), Year of construction: 2020, functionality: fully functional, operating hours: 146 h, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 35 A, cutting height (max.): 204 mm, cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, height adjustment type: electric, actuation type: electric, rotational speed (max.): 6,000 rpm, rotational speed (min.): 2,000 rpm, table height: 910 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, saw blade guard, scorer, Altendorf F 45 EvoDrive plus (total price €52,050) + Air cushion table + Laser cut line indicator Machine with only 150 operating hours, being sold at a reduced price due to restructuring of a two-person operation. Blodpfszbc Uxjx Aqroh - CNC parallel fence, 1300mm with reinforced table extension - Reinforced 7.5KW motor with VARIO speed control, 2,000 - 6,000 RPM, stepless - Extended cutting height, 204mm - 2-axis scoring saw with LED warning light in the danger area - Cross slide extension, retractable - Miter fence with DIGIT LD, cutting lengths up to 3200 mm - Reinforced extension, 840 mm - On/Off switch on the sliding carriage - Front support roller - Toolbox

Condition: used, Year of construction: 1999, power: 3 kW (4.08 HP), input voltage: 400 V, cutting height (max.): 200 mm, saw blade diameter: 520 mm, overall weight: 350 kg, cutting length (max.): 420 mm, mount diameter: 50 mm, saw drive: 3,000 W, No. 04511 Crosscut and mitre saw Graule ZS 200 N Used, year of construction 1999 Saw can be swiveled and tilted 3 kW three-phase brake motor 400 V Saw blade diameter 520 mm Saw blade holder 50 mm Cutting height 200 mm Saw blade tilted to 45°: Cutting height 140 mm Cutting length 420 mm Table dimensions 900 x 700 mm LW Aluminium fence back With machine stand and hand crank at the rear for tilt adjustment Hydraulic feed brake Pneumatic material clamping on both sides from above Saw blade spray device for coolant or lubricant Carbide circular saw blade for aluminium and plastics, diameter 520 mm Roller conveyor type RLK 4000 mm, with fold-away material fence and scale Roller conveyor 4000 mm long after the saw Roller conveyor width 350 mm Transport dimensions machine approx. 1650 x 1200 x 1850 mm LWH, roller conveyors approx. 4500 x 400 x 1950 mm LWH Weight approx. 350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Blsdpsyh Nfuefx Aqrsh Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Panel saw ALTENDORF F45 - used - double roller carriage, tilting, parallel fence with fine adjustment, outrigger table, table extension, anodized aluminium, table width extension, anodized aluminium, mitre fence, overhead guard, narrow and wide Bodpfow Nv I Uox Aqrslh ----- Technical specifications ----- Tilting range: 45°, Carriage length: 2,500 mm, Cutting width: 800 mm, Max. saw blade Ø: 450 mm, Motor power: 5.5 kW, Extraction nozzle Ø: 80 / 120 mm

Condition: used, Panel Saw ALTENDORF F45 -used- Double roller carriage, Scoring unit, Rip fence with fine adjustment, Support table, Hydraulic height adjustment, Hydraulic tilting adjustment, Digital tilt angle display, Speed display, Table extension, aluminium anodized, Table width extension, aluminium anodized, Angle/miter fence, Overhead guard, narrow and wide, Automatic brake, Bodpfxew Nx A Ie Aqrolh Dust tested ----- Technical Data ----- Tilting range: 45°, Carriage length: 3,200 mm, Cutting width: 1,300 mm, Cutting height: 125 mm, Max. saw blade Ø: 400 mm, Speeds: 3,000/4,000/5,000/6,000 rpm, Motor power: 5.5 kW, Weight: 1,040 kg

Year of construction: 2008, condition: excellent (used), Oil burner Weishaupt WM-L10 Year :2008 Blsdpfxei Ap Ato Aqrjh Мы говорим по русски! Viewing please only after telephone agreement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible

Condition: used, Sawblade tiltable 45 ° Length of the rolling table ~ 2.900 mm cutting width 1.250 mm Motor output 5,5 kW Bedoy Umfpspfx Aqrolh Cutting height max. 155 mm Saw blade diameter max. 450 mm Altendorf type F45 sliding table saw for precise cutting of solid wood, panel materials and coated materials with pivoting saw blade. The machine enables precise rip, cross and mitre cuts and is designed for daily use in professional woodworking.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Main motor: 5.5 kW Stepless speed control: 2000 - 6000 rpm Scoring motor: 0.75 kW Saw blade diameter: max. 500 mm Electromotive height and swivel adjustment of the saw blade Screen control with touchscreen Control panel at eye level Double roller carriage: 3000 mm Parallel fence with electromotive adjustment Bedezab S Tepfx Aqrelh Miter fence with electromotive adjustment of the fence flaps, manual angle adjustment with automatic length compensation, cutting length up to 3500 mm.

Condition: used, Year of construction: 2009, Sawblade tiltable 45 ° Length of the rolling table 1800 mm cutting width 250 mm Motor output 2,5 kW Cutting height 80 mm Cutting height at 45° 53 mm Saw blade diameter 250 mm Speed 3800 U/min. weight of the machine ca. 100 kg Bodsxcp N Dopfx Aqrjlh Equipment: - Extraction system - Saw blade - Parallel guide - Operating instructions

Condition: excellent (used), CATALOGUE NUMBER 8006 TECHNICAL DATA - max. diameter of the main saw blade with scoring blade: 350mm - max. diameter of the main saw blade without scoring blade: 450mm - cutting height with installed 350mm blade: 100mm - electric adjustment of the main blade up/down + angle - electric angle display - electric adjustment of the scoring blade up/down, left/right - spindle diameter: 30mm - spindle locking - with a rip fence carriage Bjdey T N Auspfx Aqrslh - cutting length on the carriage: 3400mm - cutting width with the guide: 1300mm - with a side carriage - with a scoring blade - max. diameter of the scoring blade: 120mm - spindle diameter: 22mm - scoring blade motor: 0.75kW - main motor: 5.5kW - 4 types of blade speed - electronic speed display - dust extraction port diameter: 120mm, 80mm - table dimensions: 1220x730mm - table dimension with extension: 1440mm - table dimension with extension: 2060mm - blade guard - dimensions (L/W/H): 3550x3400x1500mm - weight: 1140kg ADVANTAGES – electric adjustment of the blade and scoring blade – with original angle guide – carriage length: 3400mm – made in Germany – unpainted – used saw, very good condition Net price: 38,900 PLN Net price: 9,260 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), Year of construction: 2000, Sawblade tiltable +/- 45 ° Length of the rolling table 2800 mm Bjdoxcg Hgspfx Aqrelh cutting width 1440 mm Motor output 7,5 kW Cutting height 150 mm Saw blade diameter 450 mm weight of the machine ca. 1200 kg range L-W-H 3,2 x 3,4 x 1,7 mm

Condition: reconditioned (used), Year of construction: 2003, power: 5.5 kW (7.48 HP), cutting length (max.): 3,200 mm, cutting width at rip fence: 1,350 mm, Equipment: scorer, with scoring motor 0.73 kW, sliding table 3200 mm, mechanical parallel fence up to 1350 mm, power consumption 13.5A 400V 50Hz, max. saw blade diameter 400 mm, main motor 5.5 kW, extraction port 1x D=120 mm 1x D=80 mm, electric height adjustment, electric angle adjustment – as returned by customer Bsdpswt A Ecjfx Aqrolh

Condition: used, Year of construction: 1987, total length: 2,800 mm, total width: 1,700 mm, total height: 1,300 mm, Colour: Green Weight: 500 kg - Year: 1987 - Documentation available: No - CE certificate present: No - Serial number: 87-7-23 - Main motor power [kW]: 5.5 - Max. cutting height [mm]: 145 - Parallel stop displacement [mm]: 1100 - Roller table length [mm]: 2800 - Table width [mm]: 1150 - Max. saw blade diameter [mm]: 450 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Spindle speed: - └ Min. spindle speed [rpm]: 3000 - └ Max. spindle speed [rpm]: 4000 - Schuinstelbare zaagaggregaat: - └ Min. tilt adjustable [°]: 0 - └ Max. adjustable [°]: 45 - Voltage [V]: 400 - Fuse [A]: 16 - Power [kW]: 5.5 - Transport dimensions: 2800mm x 1700mm x 1300mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Bodpfsy Ttrajx Aqrelh Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Format circular saw F45 - Year of manufacture 1994 - Tilts to 45° - Duplex miter stop Bedoy Tm N Sepfx Aqrslh - Laser with 5mW power, red - Control panel on top - Scoring saw - Digital angle display - 5.5kW main motor - 2800mm sliding table length, 1m to the right of the blade - Electric height and swivel adjustment

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, cutting height (max.): 90 mm, cutting width (max.): 3,800 mm, saw blade diameter: 380 mm, overall weight: 4,400 kg, cutting length (max.): 3,800 mm, main saw diameter: 380 mm, Beamsaw SIGMA IMPACT 90 (SCM Group) suitable for furniture panels precize cutting by one or more panels overlapped. Manufacturer: SCM Group Model: Sigma Impact 90 Production year: 2017 Cutting width: 3.800 mm Cutting depth: 3.200 mm Max. cutting height: 90 mm Front tables (air cushion): 1x 2.500x600mm, 3x 2.500x600mm Machine basement with air-cushion. Max. main blade diameter: 380 mm Scorer diameter: max. 300 mm PUSHER: brushless motor, max. speed 120 m/min ! SAW CARRIAGE: brushless motor, max. speed 150 m/min ! THK linear guides for the saw carriage movement. THK linear guides for the PUSHER movement. Automatic centralized lubrication of THK linear guides. Hi-Tronic kit: - main motor 15 kW (mode S6) - vertical movement of main and scoring blade by price ball-screws - optimized stroke of the main blade Bodpfxox Nc Ays Aqrjlh - electronic scorer adjustment in 2 axis (vertical, horizontal) - grooving with the main blade (electronic depth adjustment) - postforming cuts - window cut outs (blind cuts) - AKE flange for main and scoring blade Quantity of clamps (grippers): 10 pcs (maximum) Automatic exclusion of the clamp acting on the panels edge (up to 800 mm width). Start/stop pedal. Label printer. Control SW: WINCUT Optimalisation program: OTTIMO PERFECT CUT TOP (1x HW key) Control PC Eye-S: Windows + LCD touch screen 21" Air conditioning device for the electric box. Panel´s dimension automatic measuring. Laser line for the visualisation of the cutting line. Automatic double side aligner - motorized (60-2.200 mm). Machine stat: fully working Possibility to see in actuall production. Availability: cca April 2026

Condition: used, Year of construction: 1998, Sliding carriage: 5000 mm Motor: 11 kW / 15 hp Cutting width: 1050 mm, without scoring blade, prepared for scoring blade Tip Servo Drive Laser-cut seam indicator Electromotive height and swivel adjustment Dimensions: 5000 x 1400 x 1900 mm Weight: approx. 1100 kg Bedpfey Tl Exox Aqrjlh Location: Nattheim